Canon Projector WUX5000 User Manual
Have a look at the manual Canon Projector WUX5000 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
11 Table of Contents Table of Contents■ When projecting on a 16:10 screen in the aspect ratio of the connected device......... 215 ■ When projecting on a 16:9 screen in the aspect ratio of the connected device........... 216 Displayed Test Patterns........................................................................................... 217 Supported Signal Types .......................................................................................... 218 Product Specifications ............................................................................................ 219 ■ Projector ........................................................................................................................ 219 ■ Remote control .............................................................................................................. 221 ■ Specification of Each Lens Unit (Option) ...................................................................... 221 ■ External View ................................................................................................................. 223 ■ ANALOG PC (WUX5000 / WUX4000), ANALOG PC-1 (WX6000 / SX6000) / COMPONENT IN Terminal ................................................................................................ 223 ■ Service Port (CONTROL) ............................................................................................... 224 Index ..........................................................................................................................228 Menu Configuration ................................................................................................ 232
12 Safety Instructions Before installing and operating the projector, read this manual thoroughly. This projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintain it in good condition for many years to come. Improper operation may result in not only shortening the product life, but also malfunc- tions, fire hazards, or other accidents. If your projector does not seem to be operating properly, read this manual again, check operations and cable connections, and try the solutions in the “Troubleshooting” section in the back of this manual. If the problem still persists, contact the Canon Customer Sup- port Center. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUT- ING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS FOR THIS UNIT IN THE OWNER’S MANUAL. CAUTION Not for use in a computer room as defined in the Standard for the Protection of Elec- tronic Computer / Data Processing Equipment, ANSI / NFPA 75. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN
13 Safety Instructions Safety Instructions Safety Precautions WARNING: • THIS APPARATUS MUST BE GROUNDED. • TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. This projector produces intense light from the projection lens. Do not stare directly into the lens, otherwise eye damage could result. Be especially careful that children do not stare directly into the beam. Install the projector in a proper position. Otherwise it may result in a fire hazard. Allowing the proper amount of space on the top, sides, and rear of the projector cabinet is critical for proper air circulation and cooling of the unit. The diagrams shown here indicates the minimum space required. If the projector is to be built into a compartment or similarly enclosed, these minimum distances must be maintained. Do not cover the ventilation slots on the projector. Heat build-up can reduce the service life of your projector, and can also be dangerous. If the projector is unused for an extended time, unplug the projector from the power out- let. Do not project the same image for a long time. An afterimage may remain on the LCD panels due to the characteristics of the panels of the projector. CAUTION ON HANGING FROM THE CEILING When hanging the projector from the ceiling, clean the air intake vents and top of the pro- jector periodically with a vacuum cleaner. If you leave the projector unclean for a long time, the cooling fans can be clogged with dust, and it may cause a breakdown or a disaster. DO NOT SET THE PROJECTOR IN GREASY, WET, OR SMOKY CONDITIONS SUCH AS IN A KITCHEN TO PREVENT A BREAKDOWN OR A DISASTER. IF THE PROJEC- TOR COMES IN CONTACT WITH OIL OR CHEMICALS, IT MAY BECOME DETERIO- RATED. SIDE and TOP REAR 50 cm (1.6)50 cm (1.6) 50 cm (1.6) 50 cm (1.6)
Safety Instructions 14 ■READ AND KEEP THIS OWNER’S MANUAL FOR LATER USE. All the safety and operating instructions should be read before beginning to operate the product. Read all of the instructions given here and retain them for later use. Unplug this projector from the AC power supply before cleaning. Do not use liquid or aerosol cleaners on the projector. Use a damp cloth for cleaning. Follow all warnings and instructions marked on the projector. For added protection of the projector during a lightning storm, or when it is left unat- tended or unused for long periods of time, unplug it from the wall outlet. This will prevent damage due to lightning and power surges. Do not expose this unit to rain or use near water... for example, in a wet basement, near a swimming pool, etc... Do not use attachments not recommended by the manufacturer as they may result in haz- ards. Do not place this projector on an unstable cart, stand, or table. The projector may fall, causing serious injury to a child or adult, and serious damage to the projector. Use only with a cart or stand recommended by the manufacturer, or sold with the projector. Wall or shelf mounting should be carried out in accordance with the manufacturer’s directions, and should use a mounting kit approved by the manufacturers. An appliance and cart combination should be moved with care. Sudden stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. Slots and openings in the rear and front of the cabinet are provided for ventilation, to insure reliable operation of the equipment and to protect it from overheating. The openings should never be covered with cloth or other materials, and the bottom opening should not be blocked by placing the projector on a bed, sofa, rug, or other sim- ilar surface. This projector should never be placed near or over a radiator or heat register. This projector should not be placed in a built-in installation such as a book case unless proper ventilation is provided.
15 Safety Instructions Safety Instructions Never push objects of any kind into this projector through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind onto the projector. Do not install the projector near the ventilation duct of air-conditioning equipment. This projector should be operated using only the type of power source indicated on the marking label. If you are not sure of the type of power supplied, contact the Canon Cus- tomer Support Center or local power company. Do not overload wall outlets and extension cords as this can result in fire or electric shock. Do not allow anything to rest on the power cord. Do not locate this projector where the cord may be damaged by people walking on it. Do not attempt to service this projector yourself as opening or removing covers may expose you to dangerous voltages or other hazards. Refer all servicing to qualified ser- vice personnel. Unplug this projector from the wall outlet and refer servicing to qualified service person- nel under the following conditions: a. When the power cord or plug is damaged or frayed. b. If liquid has been spilled into the projector. c. If the projector has been exposed to rain or water. d. If the projector does not operate normally after following the operating instructions. Adjust only those controls that are covered in the operating instructions as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the projector to normal operating condition. e. If the projector has been dropped or the cabinet has been damaged. f. When the projector exhibits a distinct change in performance-this indicates a need for servicing. When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer that have the same characteristics as the original parts. Unauthorized substitutions may result in fire, electric shock, or injury. Upon completion of any service or repairs to this projector, ask the service technician to perform routine safety checks to determine that the projector is in safe operating condi- tion.
Safety Instructions 16 AC Power Cord Requirement The AC Power Cord supplied with this projector meets the requirements for use in the country you purchased it. THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EAS- ILY ACCESSIBLE. AC Power Cord for the United States and Canada: The AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories (UL) and certified by the Canadian Standard Association (CSA). The AC Power Cord has a grounding-type AC line plug. This is a safety feature to ensure the plug fits into the power outlet. Do not try to tamper with this safety feature. Should you be unable to insert the plug into the outlet, contact your electrician. NOTE FOR CUSTOMERS IN THE US LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. European Union (and EEA) only. These symbols indicate that this product is not to be disposed of with your household waste, according to the WEEE Directive (2002/96/EC), the Battery Directive (2006/66/EC) and / or your national laws imple- menting those Directives. If a chemical symbol is printed beneath the symbol shown above, in accordance with the Battery Directive, this indicates that a heavy metal (Hg = Mercury, Cd = Cadmium, Pb = Lead) is present in this battery or accumulator at a concentration above an applicable threshold specified in the Battery Directive. This product should be handed over to a designated collection point, e.g., on an authorized one-for-one basis when you buy a new similar product or to an authorized collection site for recycling waste electrical and elec- tronic equipment (EEE) and batteries and accumulators. Improper han- dling of this type of waste could have a possible impact on the environment and human health due to potentially hazardous sub- stances that are generally associated with EEE. Your cooperation in the correct disposal of this product will contribute to the effective usage of natural resources. For more information about the recycling of this product, please contact your local city office, waste authority, approved scheme or your household waste disposal service or visit www.canon-europe.com/environment . (EEA: Norway, Iceland and Liechtenstein) Ground
17 Safety Instructions Safety Instructions Federal Communication Commission Notice Multimedia Projector, Model: WUX5000 / WUX4000 / WX6000 / SX6000 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to pro- vide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or tele- vision reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio / TV technician for help. The cable with a ferrite core provided with the projector must be used with this equip- ment in order to comply with Class B limits in Subpart B of Part 15 of the FCC rules. Use of a shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules. Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment. Canon U.S.A. Inc. One Canon Plaza, Lake Success, NY 11042-1198, U.S.A. Tel No. (516) 328-5600 Canadian Radio Interference Regulations This Class B digital apparatus complies with Canadian ICES-003.
Safety Instructions 18 Precautions for Use As this section contains important safety-related information, be sure to read the following carefully beforehand in order to use your projector correctly and safely. If the following situations occur, turn the power off, remove the power plug from the power outlet and contact the Canon Customer Support Center. Failure to do so could cause a fire or result in an electric shock. If smoke is emitted If an unusual smell or noise is emitted If a loud noise is heard and the lamp turns off If water or other liquid has entered the projector If metal or any other foreign material has entered the projector If the projector is knocked over or dropped and the cabinet is damaged Pay attention to the following points for handling the power cord. Failing to pay atten- tion to these points could cause a fire, electric shock or personal injury. Do not place any objects on the power cord and do not allow it to become trapped under the projector. The power cord may be damaged. Do not cover the power cord with a carpet. Do not excessively bend, twist, pull or make modifications to the power cord. Keep the power cord away from heaters and other sources of heat. Do not use the power cord when it is bent finely, coiled or bundled. Do not use a damaged power cord. If your power cord is damaged, contact the Canon Customer Support Center. Do not use any power cord other than the type that is included with this projector. Be sure to connect the ground wire of the power cord to ground. Failure to do so could result in an electric shock. Be sure to connect the ground wire before connecting the power plug to the outlet. Also when you disconnect the ground wire, be sure to unplug the power plug from the outlet beforehand. Warning Warning
19 Safety Instructions Safety Instructions Precautions for Installation Pay attention to the following points regarding the power source, power plug and han- dling of the connector. Failure to do so could result in a fire, electric shock or personal injury. Do not use any power source with a voltage other than the voltage indicated (AC 100 – 240 V). Do not pull the power cord and be sure to hold the power plug or connector when removing. The cord could be damaged as a result. Do not insert any metal objects into the contact parts of the power plug or connector. Remove the power plug from the outlet before performing cleaning or maintenance of the projector. Do not remove the power plug or connector with wet hands. Insert the power plug and connector securely up to the base. Additionally, do not use a damaged power plug or an outlet that is loose. If using an extension cord attached to the outlet, make sure that the total electric power consumption of connected devices does not exceed the rated capacity. Periodically inspect the power plug and outlet and remove any dust or dirt from between the plug and the outlet. Pay attention to the following points regarding installation and handling of the projector. Failure to do so may cause a fire, electric shock or personal injury. Do not use the projector in a bathroom or shower room. Do not use the projector in rain or snow, by the sea, or in close proximity to a body of water. Do not place containers containing a liquid on top of the projector. Do not place the projector in any location where it will be exposed to oily smoke or steam, such as a kitchen work surface or table etc. Do not touch the projector itself, the power cord, or the cable if lightening strikes. Warning Warning
Safety Instructions 20 Pay attention to the following points regarding installation and handling of the projector. Failure to do so may cause a fire, electric shock or personal injury. Do not move the projector until you have switched off the power, removed the power plug from the power outlet and unplugged any other cables. Before installing or replacing a lens unit, make sure to remove the power plug from the outlet. Failure to do so could result in an electric shock or injury. Do not remove the cabinet from the projector or disassemble it. The interior of the projector contains high-voltage components as well as parts that are hot. These could cause an electric shock or burn. If inspection, maintenance or repair is required, contact the Canon Customer Support Center. Do not disassemble or modify the projector (including consumable parts) or the remote control. Do not insert any object into vents in the projector, such as the air intake vent or exhaust vents. Do not place a pressurized can in front of the exhaust vents. The pressure of the contents of the can may increase due to heat from the exhaust vents and this could result in an explosion. As strong light beams are emitted while the projector is in use, do not look directly into the projector lens. Doing so could cause an eye injury. Pay particular attention in preventing young children to do so. When giving a presentation in front of the projector while it is projecting an image, conduct your presentation from a position where your shadow will not be cast on the screen and where you do not feel blinded by light from the projector. Pay attention to the following points regarding installation and handling of the projec- tor. If the projector will not be used for a long period of time, be sure to remove the power plug from the power outlet to ensure safety. Failure to do so could cause a fire. The temperature of the cabinet around and above the exhaust vents can become hot during projector operation. Touching these areas during operation could cause burns to the hands. Do not touch these areas. Doing so may cause burns. Pay particular attention in pre- venting young children from touching these parts. Additionally, do not place any metal objects on these areas. Due to the heat from the projector, doing so could cause an accident or personal injury. Warning Caution