Canon Projector WUX5000 User Manual
Have a look at the manual Canon Projector WUX5000 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 186
Setting Up the Network
186
■Setting Projector Information [Projector info.]
From [Projector info.] in the settings window, you can set the names and location
names which are used to identify projectors when multiple projectors are installed on
the network. For the setting procedure, refer to page 177.
ItemExplanationFactory default setting
SNMP Select the SNMP function version. If OFF is
selected, the SNMP function will be turned
off and the other settings in this window
cannot be changed.OFF...](http://img.usermanuals.tech/thumb/14/98910/w64_projector_manual_6830_d-185.png "Page 186
Setting Up the Network
186
■Setting Projector Information [Projector info.]
From [Projector info.] in the settings window, you can set the names and location
names which are used to identify projectors when multiple projectors are installed on
the network. For the setting procedure, refer to page 177.
ItemExplanationFactory default setting
SNMP Select the SNMP function version. If OFF is
selected, the SNMP function will be turned
off and the other settings in this window
cannot be changed.OFF...")
![Page 187
187
Setting Up the Network
Installation Manual Connecting to a Networ
k
■Setting PJLink [PJLink]
From [PJLink] in the setting window, you can set the PJLink functions which are the
standard for projector management on a network. For the setting procedure, refer to
page 177. For information about PJLink, refer to page 174.
ItemExplanationFactory default
setting
PJLink Turn the PJLink function on or off. If
OFF is selected, the PJLink func-
tion will be turned off and the other
settings in this window...](http://img.usermanuals.tech/thumb/14/98910/w64_projector_manual_6830_d-186.png "Page 187
187
Setting Up the Network
Installation Manual Connecting to a Networ
k
■Setting PJLink [PJLink]
From [PJLink] in the setting window, you can set the PJLink functions which are the
standard for projector management on a network. For the setting procedure, refer to
page 177. For information about PJLink, refer to page 174.
ItemExplanationFactory default
setting
PJLink Turn the PJLink function on or off. If
OFF is selected, the PJLink func-
tion will be turned off and the other
settings in this window...")
![Page 189
Controlling the Projector from a Computer
189
Installation Manual Connecting to a Networ
k
5The projector control screen appears. The projector can be controlled from this
screen.
6When the operations are finished, click [Back to top] to return the initial web screen.
ItemExplanation
Projector name The name of the connected projector is displayed. (P186)
IP address The IP address of the connected projector is displayed. (P182)
Refresh Refreshes the displayed contents with the most recent informa-
tion....](http://img.usermanuals.tech/thumb/14/98910/w64_projector_manual_6830_d-188.png "Page 189
Controlling the Projector from a Computer
189
Installation Manual Connecting to a Networ
k
5The projector control screen appears. The projector can be controlled from this
screen.
6When the operations are finished, click [Back to top] to return the initial web screen.
ItemExplanation
Projector name The name of the connected projector is displayed. (P186)
IP address The IP address of the connected projector is displayed. (P182)
Refresh Refreshes the displayed contents with the most recent informa-
tion....")
![Page 195
195
Installation Manual Maintenance
Replacing the Lamp
When the usage time of the lamp exceeds a certain amount of time, the following mes-
sage (two types) is displayed for 10 seconds every time the projector is turned on.
2,700 hours to less than 3,000 hours
Prepare a new lamp when this screen is displayed.
Only the [ ], [ ], OK and POWER buttons are available while this screen is displayed.
When you press the POWER button, “Push POWER button again to turn off power.”
message appears.
After this...](http://img.usermanuals.tech/thumb/14/98910/w64_projector_manual_6830_d-194.png "Page 195
195
Installation Manual Maintenance
Replacing the Lamp
When the usage time of the lamp exceeds a certain amount of time, the following mes-
sage (two types) is displayed for 10 seconds every time the projector is turned on.
2,700 hours to less than 3,000 hours
Prepare a new lamp when this screen is displayed.
Only the [ ], [ ], OK and POWER buttons are available while this screen is displayed.
When you press the POWER button, “Push POWER button again to turn off power.”
message appears.
After this...")
Projecting an Image Safety Instructions Before Use Table of Contents Useful Functions Available During a Presentation Setting Functions from Menus Installation Connecting to a Network Maintenance Appendix Index Appendix User’s Manual Installation Manual 191 Maintenance
192 Cleaning the Projector Clean the projector frequently to prevent dust from settling on the surface. A dirty lens may ruin the quality of the projected image. Wipe the projector’s main unit softly with a soft cloth. If the projector is heavily soiled, soak the cloth in water with a small amount of detergent in it, squeeze the cloth thoroughly, and then wipe the projector with it. After cleaning, wipe the projector with a dry cloth.When cleaning the projector, make sure to turn off the projector, wait until the cooling fan stops, disconnect the power plug from the electrical outlet, and let the projector stand for at least 1 hour. Oth- erwise, you may get burned because the main unit is very hot immediately after the projector is turned off. Never use volatile cleaning liquid or benzine, as these may damage the finish of the pro- jector. When using a chemical dust cloth, make sure to read the instructions thoroughly. When cleaning the projector’s lens, use a commonly available air blower or lens cleaning paper. The lens surface is easily damaged, so do not use a hard cloth or tissues.
193 Installation Manual Maintenance Cleaning and Replacing the Air Filter Replacing the Air Filter Follow the procedure below when replacing the air filter. 1Turn off the projector power and remove the power plug. 2Hook your finger onto the handle of the air filter on the side of the projector, and pull the air filter out to remove it. 3Remove the filter from the air filter frame. First disengage the tab on the inside, then remove the entire air filter from the frame. 4Install a new air filter into the frame. First insert the air filter tab into the groove on the handle side of the frame, then press the air filter into the frame. Air filter
Cleaning and Replacing the Air Filter 194 5Securely insert the air filter all the way into the projector. Cleaning the Air Filter The air filter protects the lens and mirror inside the projector from dust and dirt. Should the air filter become clogged with dust, the projector may be damaged since it will block the air flow into the projector and raise the internal temperature of the projector. The fol- lowing screen is displayed when turning on the projector if the air filter needs to be cleaned (after approx. 300 hours). Clean the air filter if it is displayed. Turn the power of the projector off and pull out the power plug. Hook your finger into the air filter handle on the side of the projector, and remove the air filter. Then use a vacuum cleaner to remove the dust. If the filter replacement screen is displayed when turning on the projector after cleaning the air filter, select [Yes] and press OK. The filter replacement screen will disappear. This screen is not displayed when [Filter warning display] is set to [Off]. (WX6000 / SX6000) (P137) Handle the air filter carefully. If damaged, the air filter will not work properly. When the lamp is replaced, it is recommend that you also replace the air filter. Contact the Canon Customer Support Center for further information. Replacement air filter part No.: RS-FL01 This can also be purchased from the Canon home page (http://store.canon.jp/user/ListProducts/list?svid=2&sc=LMPPR&jsp=/jsp/search/ search_item_acc.jsp). Only the [ ], [ ], OK and POWER buttons are available while this screen is displayed. (When you press the POWER button, the message “Push POWER button again to turn off power” appears.) When this screen has disappeared after being dis- played for 10 seconds, all buttons become opera- ble.
195 Installation Manual Maintenance Replacing the Lamp When the usage time of the lamp exceeds a certain amount of time, the following mes- sage (two types) is displayed for 10 seconds every time the projector is turned on. 2,700 hours to less than 3,000 hours Prepare a new lamp when this screen is displayed. Only the [ ], [ ], OK and POWER buttons are available while this screen is displayed. When you press the POWER button, “Push POWER button again to turn off power.” message appears. After this screen has been displayed for 10 seconds and disappeared, all buttons become operable. This message will not be displayed again if you select [Cancel] in response to the mes- sage “Do you want to display this message again?”. 3,000 hours or more If this screen is displayed, replace the lamp by referring to the procedure on page 196. POWER button is available while this screen is displayed. When you press the POWER button, the “Push POWER button again to turn off power.” message appears. When this screen has disappeared after being displayed for 10 seconds, all buttons become operable. You can check the usage time of the lamp in [Lamp counter] in the [System settings] menu. (P135) This screen is not displayed when [Lamp warning display] is set to [Off]. (WX6000 / SX6000) (P135)
Replacing the Lamp 196 Replacement Lamp This projector uses the following lamps. Lamp part No.: RS-LP06 (WUX4000) RS-LP07 (WUX5000 / WX6000 / SX6000) Contact the Canon Customer Support Center when purchasing a replacement lamp. Replacing the Lamp 1Turn off the projector power and remove the power plug. 2Loosen one screw and open the lamp cover in the direction of the arrow. The lamp cover screw is attached to the lamp cover and designed to prevent it from falling off.When replacing the lamp, turn off the projector, wait until the cool- ing fan stops, disconnect the power plug from the electrical outlet, and let the projector stand for at least 1 hour. Otherwise, you may get burned because the main unit is very hot immediately after the projector is turned off. • Be sure to use the specified lamp. • Contact the Canon Customer Support Center or access to the Canon home page. • Do not touch the inner glass surface when you replace the lamp. Doing so may cause deterioration to the projector’s performance. • Be sure to handle the lamp carefully and correctly since it may break during use if it has been scratched or subjected to impact. If the lamp breaks, contact the Canon Customer Support Center or follow the instructions on page 21 and page 22. • When replacing the lamp, do not remove any screws other than those specified. Screw
197 Replacing the Lamp Installation Manual Maintenance 3Loosen the 3 screws on the inside of the lamp unit, then slowly pull out the lamp unit in the direction of the arrow. Even when the screws are loosened, they will not fall off the lamp unit. 4Fully insert a new lamp unit and secure it with the 3 screws. 5Close the lamp cover and tighten the screws. 6Turn on the power. Bring up the menu and select [System settings] - [Other settings] - [Lamp counter]. (The screen is for the WUX5000 / WUX4000.)
Replacing the Lamp 198 7Select [Reset] - [OK] to reset the lamp counter. It is recommended that you also replace the air filter when you replace the lamp. Contact the Canon Customer Support Center for further information. Replacement air filter product number: RS-FL01 (The screen is for the WUX5000 / WUX4000.)