Home > Canon > Printer > Canon printer PIXMA MP800R User Manual

Canon printer PIXMA MP800R User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Canon printer PIXMA MP800R User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Chapter 3 49Printing from a Memory Card
    *1 Requires purchase of a separate compact flash card adapter for xD-Picture cards.*2 Use the special adapter provided with the card.
    „Inserting the Memory Card
    1Press [ON/OFF] to turn on the machine.
    See “Turning on the Machine” on page 18.
    2Open the Card Slot Cover.
    Important
    zThis machine supports image data created by DCF standard digital cameras (based on 
    Exif), and DPOF (based on Ver. 1.00).
    zImage data taken or saved on memory cards that do not guarantee the action with the 
    digital camera might be unreadable from the machine or the image data might be 
    damaged. For details on memory cards guarantee the action with the digital camera, refer 
    to the manuals supplied with your digital camera.
    zFormat the memory card with a digital camera. The memory card might not be usable with 
    the machine if formatted on a computer.
    zImages edited on a computer may not be printed correctly.
    zInsert only one kind of memory card at a time.
    Note
    zWhen  is selected in Read/write attribute under Other settings by using the 
    Operation Panel on the machine, card direct printing cannot be done. After using the Card 
    Slot as the memory card drive of the computer, remove the memory card, then be sure to 
    set Read/write attribute to . See “Read/write attribute” on page 106.
    zWhen you have edited or processed the data on a memory card on a computer, be sure to 
    print the data from the computer. If you print using the Operation Panel, the data might not 
    be printed correctly. 
    						
    							50Chapter 3Printing from a Memory Card
    3Insert a memory card into the Card Slot.
    * Be sure to attach the memory card to the special adapter before inserting it into the Card 
    Slot.
    4Ensure that the Access Lamp is lit after it stops flashing.
    Card TypeInserting Card
    zCompact Flash (CF) card
    zMicrodrive
    zxD-Picture card*
    Insert into the Card Slot on the left side. 
    The Access Lamp (A) lights up.
    zSmartMedia
    Insert into the Card Slot on the right side. 
    The Access Lamp (A) lights up.
    zMEMORY STICK
    zMEMORY STICK PRO
    zMEMORY STICK Duo*
    zMEMORY STICK PRO Duo*
    zSD Secure Digital memory card
    zminiSD Card*
    zMultiMedia card
    Insert into the center part of the Card Slot on the right side.
    The Access Lamp (A) lights up.
    Caution
    zThe memory card sticks out of the Card Slot, but do not force it into the slot any further. 
    Doing so damages the machine and the memory card.
    zCheck if the right side of the memory card is facing to the right. If you force the memory 
    card with the wrong direction into the Card Slot, the machine and/or the memory card may 
    be damaged.
    zWhile the Access Lamp is flashing, do not remove the memory card or the card adapter 
    containing the memory card, nor turn off the machine, as this might damage the data on 
    the memory card.
    (A)
    (A)
    (A) 
    						
    							Chapter 3 51Printing from a Memory Card
    „Removing the Memory Card
    1Open the Card Slot Cover.
    2Ensure that the Access Lamp is not flashing, then remove the memory card.
    3Close the Card Slot Cover.
    Printing Photograph
    Let’s select a photo from the photos stored on the memory card of the digital camera, and print it.
    „Printing Photo Displayed on the LCD (Single-photo print)
    Print a photo saved on the memory card.
    1Prepare for printing.
    (1)Press [ON/OFF] to turn on the machine.
    See“Turning on the Machine” on page 18.
    (2)Load paper.
    See“Loading Paper” on page 20.
    (3)Ensure that the proper paper source is selected.
    See“Changing the Paper Source” on page 24.
    (4)Insert a memory card into the Card Slot.
    See“Inserting the Memory Card” on page 49.
    Note
    When using the Card Slot as the memory card drive of the computer, the removal operation 
    from the computer is needed before removing the memory card from the machine.
    Over a USB connection:
    Right-click the removable disk icon and click [Eject]. If [Eject] is not displayed on the screen, 
    ensure that the Access Lamp is not flashing and remove the memory card.
    Over a wireless or wired LAN connection:
    The removal operation is not needed.
    Be sure to drag the   icon into the Trash.
    Important
    Removing the memory card or turning off the machine while the Access Lamp is flashing can 
    damage the data stored in the memory card.
    Note
    Specify [Feed Switch] so that the Auto Sheet Feeder Lamp is lit when feeding paper from the 
    Auto Sheet Feeder and the Cassette Lamp is lit when feeding paper from the Cassette. 
    						
    							52Chapter 3Printing from a Memory Card
    2Select the print menu.
    (1)Press [MEMORY CARD].
    (2)Use [ ] or [ ] to select , then press [OK].
    The photo selection screen is displayed.
    3Select the photo you want to print.
    (1)Use [ ] or [ ] to display the photo you want to print.
    (2)Press [Color].
    The print confirmation screen is displayed.
    Note
     may be displayed on the LCD while reading the photo.
    Note
    Displaying Photos Automatically on the LCD (Slide Show)
    You can automatically display photos in sequence when selecting .
    zTo start the slide show, press [OK] when checking photos in .
    zTo stop the slide show, press [Stop/Reset] during the slide show.
    You can do...
    zTo search for photos with the shooting date (Search), see “Searching for Photos with the 
    Shooting Date (Search)” on page 54.
    zTo print a specified area (Trimming), see “Printing a Specified Area (Trimming)” on 
    page 55.
    (2) 
    						
    							Chapter 3 53Printing from a Memory Card
    4Start printing.
    (1)Check the page size and media type.
    (2)Use [ ] or [ ] to specify the number of prints.
    (3)Press [Color].
    The machine starts printing.
    „Specifying How Many Copies to Print for Each Photo (Multi-photo print)
    You can specify the number of prints to be made for each photo.
    1Prepare for printing.
    See “Prepare for printing.” on page 51.
    2Select the print menu.
    (1)Press [MEMORY CARD].
    (2)Use [ ] or [ ] to select , then press [OK].
    The photo selection screen is displayed.
    3Specify the number of prints for each photo.
    (1)Use [ ] or [ ] to select the image you want to print.
    (2)Use [ ] or [ ] to specify the number of prints.
    (3)Repeat from step (1) to step (2) to specify the number of prints for each photo.
    Note
    Press [Settings] to check or change the page size, media type, or other settings. See “To 
    Change Print Settings” on page 35.
    Note
    zTo cancel printing, press [Stop/Reset].
    zThe printing is not started if you press [Black].
    (2)
    (1)
    (2) 
    						
    							54Chapter 3Printing from a Memory Card
    (4)Press [OK].
    The print confirmation screen is displayed.
    4Start printing.
    (1)Confirm the settings.
    To change any of the settings, press [Settings].
    See“Changing the Print Settings” on page 35.
    (2)Press [Color].
    The specified number of copies of each photo will be printed.
    Other Useful Functions
    „Searching for Photos with the Shooting Date (Search)
    When there are a lot of photos saved on the memory card, you can choose to display and print 
    only photos shot on the specified date or within the specified range of dates.
    1Set the search method.
    (1)Press [Search].
    The Search method screen is displayed.
    (2)Use [ ] or [ ] to select the search method.
    If you want to specify only one date for search, select .
    If you want to specify the date range for search, select .
    (3)Press [OK].
    The date input screen is displayed.
    Note
    You can do...
    zTo search for photos with the shooting date (Search), see “Searching for Photos with the 
    Shooting Date (Search)” on page 54.
    zTo print a specified area (Trimming), see “Printing a Specified Area (Trimming)” on 
    page 55.
    Note
    zTo cancel printing, press [Stop/Reset].
    zThe printing is not started if you press [Black].
    Note
    zBy pressing [Search] to specify a date or date range, you can display and print the photos 
    shot on the specified date or within the specified date range in  or 
    , , , or ().
    zIf the number of prints to make is already specified for some photos before searching with 
    the shooting date, or if some photos are already pasted on a layout, those photos will still 
    be selected for printing even if they were not shot on the specified date or within the 
    specified date range.
    zWhen using ,  or (), only the 
    photos shot on the specified date or within the specified date range can be printed.
    Note
    It may take a while for the date input screen to be displayed depending on the number of 
    photos saved on the memory card. 
    						
    							Chapter 3 55Printing from a Memory Card
    2Specify the date range.
    zIf you selected :
    (1)Use [ ] or [ ] to specify the date to search for.
    (2)Go to main step 3.
    zIf you selected :
    (1)Use [ ] or [ ] to specify the date of the oldest photos you want to print, then press 
    [OK].
    (2)Use [ ] or [ ] to specify the date of the most recent photos you want to print.
    (3)Go to main step 3.
    3Start searching.
    (1)Press [OK].
    The machine starts searching and the photos within the specified date range are 
    displayed.
    „Printing a Specified Area (Trimming)
    You can edit images displayed on the LCD by cropping them. 
    1Select the photo you want to crop.
    (1)Use [ ] or [ ] to select the photo you want to crop.
    2Display the trimming edit screen.
    (1)Press [Trimming].
    The trimming edit screen is displayed.
    3Choose the area you want to print.
    (1)Use [ ], [ ], [ ], [ ] to position the cropping frame, then press [Trimming].
    If you do not rotate or resize the cropping frame, go to main step 4.
    Note
    zThe date to be specified is displayed according to the settings of . See 
    “Date display” on page 106.
    zTo exit Search mode, select  from the Search method screen, and then 
    press [OK]. You can also exit Search mode by switching to any mode other than Memory 
    card mode.
    Note
    Crop images after specifying the page size, media type, and bordered or borderless printing 
    in the Settings (Memory Card). If you change the paper settings after cropping, the cropped 
    area may be adjusted to match the paper, or be disabled completely. 
    						
    							56Chapter 3Printing from a Memory Card
    (2)Use [ ] to enlarge or [ ] to reduce the cropping frame size, respectively.
    (3)Use [ ] or [ ] to switch the cropping frame between portrait and landscape.
    4Finalize your selection of trimming area.
    (1)Press [OK].
    The area to be cropped is specified, and the original photo is displayed.
    „Printing Several Photos on a Single Sheet of Paper (Layout print)
    You can print the specified photos in the specified layout.
    1Prepare for printing.
    See “Prepare for printing.” on page 51.
    2Select the print menu.
    (1)Press [MEMORY CARD].
    (2)Use [ ] or [ ] to select , then press [OK].
    (3)Use [ ] or [ ] to select , then press [OK].
    Note
    zThe cropped image cannot be newly saved on the memory card.
    zThe trimming area is displayed only for photos which have been trimmed.
    zTo change the trimming area once it has been set, press [Trimming] again.
    zTo cancel trimming while editing the trimming frame, press [Stop/Reset] while the trimming 
    edit screen is displayed. You can also cancel trimming by switching to any mode other than 
    Memory card mode.
    zTo cancel trimming after trimming has been set, press [Trimming] and then press [Stop/
    Reset]. 
    						
    							Chapter 3 57Printing from a Memory Card
    3Specify the layout.
    (1)Use [ ] or [ ] to select the layout, then press [OK].
    The following layouts can be selected.
    4Specify the paste method.
    (1)Use [ ] or [ ] to select the pasting method.
    If you select  then press [OK], all photos saved on the memory card are 
    automatically pasted in the specified layout. Go to step 6.
    If you select  then press [OK], the photo selection screen is 
    displayed.
    5Paste photos one by one.
    (1)Use [ ] or [ ] to display the photo to be pasted, then press [OK].
    (2)Repeat step (1) to paste photos.
    Press [Back] to cancel the last pasted photo.
    Press [Stop/Reset] to cancel all pasted photos.
    (3)Press [Color] after pasting all photos.
    The print confirmation screen is displayed.
    6Start printing.
    See “Start printing.” on page 53. Bordered: x2/x4/x8, Half, Half (w/line)
    Borderless: x2/x4/x8, Half, Half (w/line)
    Album: Album (4/right), Album (4/left)
    Mixed: Mixed 1, Mixed 2, Mixed 3
    Note
    zWhen you select Borderless, the media type cannot be set to .
    zYou can select Mixed 1-3 only when the page size is set to  or 
    .
    Note
    You can do...
    zTo search for photos with the shooting date (Search), see “Searching for Photos with the 
    Shooting Date (Search)” on page 54.
    zTo print a specified area (Trimming), see “Printing a Specified Area (Trimming)” on 
    page 55.
    Note
    Pasting cannot be done over multiple pages. When you finish pasting photos for one page, 
    print the page. 
    						
    							58Chapter 3Printing from a Memory Card
    „Printing on the Sticker (Sticker Print)
    You can print your favorite photo with a frame on Canon Photo Stickers.
    1Prepare for printing.
    See “Prepare for printing.” on page 51.
    2Select the print menu.
    (1)Press [MEMORY CARD].
    (2)Use [ ] or [ ] to select , then press [OK].
    (3)Use [ ] or [ ] to select , then press [OK].
    3Select the layout for the sticker you want to print.
    (1)Use [ ] or [ ] to select .
    You can only print in the Stickers x 16 layout though other layouts appear on the LCD.
    (2)Press [OK].
    The photo selection screen is displayed.
    4Select the photo you want to print.
    (1)Use [ ] or [ ] to display the photo to print, then press [OK].
    The frame selection screen is displayed.
    5Select the frame.
    (1)Use [ ] or [ ] to select the frame, then press [OK].
    The print confirmation screen is displayed.
    6Start printing.
    See “Start printing.” on page 53.
    Note
    zWhen you use this function, load paper in the Auto Sheet Feeder.
    zYou can only load one sheet of stickers at a time in the Auto Sheet Feeder.
    Note
    You can do...
    zTo search for photos with the shooting date (Search), see “Searching for Photos with the 
    Shooting Date (Search)” on page 54.
    zTo print a specified area (Trimming), see “Printing a Specified Area (Trimming)” on 
    page 55.
    Note
    zIf you do not select a frame using [ ] or [ ], the photo is printed without any frame. 
    When you want to print with no frame, just press [OK].
    zWhen the photo is upside down, use [ ] or [ ] to rotate it by 180 degrees to orient it 
    properly against the frame.
    zIf you want to rotate the photo by 90 degrees to fit it within the frame, use the trimming edit 
    screen to rotate the cropping area. See “Printing a Specified Area (Trimming)” on page 55.
    Note
    Settings cannot be changed when printing stickers. 
    						
    All Canon manuals Comments (0)

    Related Manuals for Canon printer PIXMA MP800R User Manual