Canon printer MAXIFY MB5120 User Manual
Have a look at the manual Canon printer MAXIFY MB5120 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
IPsec *3IPsec settingActiveSecurity Protocol *3Security methodESP/ESP & AH/AHWired LAN DRXDiscontinuous reception (wired LAN)Enable/DisableOther SettingsOther settings–Printer NamePrinter namePrinter name (Up to 15 alphanumeric charac- ters)Direct Conn. DevNameDevice name for direct connec- tion (Up to 32 characters)Device name for direct connectionWSD PrintingWSD printing settingEnable/DisableWSD TimeoutTimeout1/5/10/15/20 [min]LPD PrintingLPD printing settingEnable/DisableRAW PrintingRAW printing settingEnable/DisableBonjourBonjour settingEnable/DisableBonjour Service NameBonjour service nameBonjour service name (Up to 52 alphanumeric characters)LLMNRLLMNR settingEnable/DisableSNMPSNMP settingEnable/DisableDNS ServerObtain DNS server address auto- maticallyAuto/ManualPrimary ServerPrimary server addressXXX.XXX.XXX.XXXSecondary ServerSecondary server addressXXX.XXX.XXX.XXXProxy ServerProxy server settingEnable/DisableProxy AddressProxy addressXXXXXXXXXXXXXXXXXXXXProxy PortProxy port specification1 to 65535Cert. Fingerprt(SHA-1)Certificate fingerprint(SHA-1)XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXXCert. Fingerprt(SHA-256)Certificate fingerprint(SHA-256)XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX ("XX" represents alphanumeric characters.) *1 Channel may range from 1 to 11 depending on country or region of purchase. 361
*2 Network status is only printed when IPv6 is enabled. *3 Network status is only printed when IPv6 and IPsec settings are enabled. 362
ChangingLANConnectionMethod/ChangingWirelessLAN ConnectionMethod Changing LAN Connection Method Changing Wireless LAN Connection Method ChangingLANConnectionMethod Follow either procedure below to change LAN connection method (wired or wireless).
4.Tap Cablelesssetup .5. Check message and tap OK. Follow instructions on your smartphone or tablet. 6. If message saying setup is completed appears, tap OK.
NetworkSettings(IJNetworkDeviceSetupUtility)(Windows) IJNetworkDeviceSetupUtility StartingUpIJNetworkDeviceSetupUtility IJNetworkDeviceSetupUtilityScreen PerformingNetworkSettings CheckingNetworkStatus IJNetworkDeviceSetupUtilityMenus OtherNetworkInformation 365
IJNetworkDeviceSetupUtilityIJ Network Device Setup Utility allows a network/printer administrator to manage printers on network. When you perform printer setup, the utility is installed at the same time. Use IJ Network Device Setup Utility for:
StartingUpIJNetworkDeviceSetupUtilityStart up IJ Network Device Setup Utility as shown below.
IJNetworkDeviceSetupUtilityScreen Items on IJ Network Device Setup Utility Screen Menus on IJ Network Device Setup Utility Screen Items on IJ Network Device Setup Utility Screen Toolbar ItemsonIJNetworkDeviceSetupUtilityScreen The screen below appears when you start up IJ Network Device Setup Utility. Detected printers are listed on the screen and the items below are shown. 1. ProductName Displays the product name of detected printer. The icon below appears on the left if the printer cannot be used. : Appears when the printer has not been connected or configured. : Appears when the IP address is duplicated to another printer. : Appears when you cannot communicate with the printer. Note
SetupCompletedAppears after performing network setup and clicking Set to close the window. NotConnected Indicates the printer is required to perform wireless LAN setup. Performing/Changing Wireless LAN Settings NotSet Indicates the printer cannot be used on network. Specify an IP address or enable IPv6. IPAddressOverlap Indicates the IP address is duplicated to another printer. Unknown Indicates the printer used in the past cannot be used currently. Note