Canon printer MAXIFY MB2320 User Manual

Important•
Be sure to connect the telephone line before the machine is turned on.
If you connect the telephone line when the machine is turned on, turn the machine off and unplug the power cord. Wait for 1 minute then connect the telephone line and power plug.
Note
•
Refer to Rear View  for the position of the telephone line jack and the external device jack.
•
Before connecting a telephone or answering machine, remove the Telephone connector cap.
•
For users in the UK:
If the connector of the external...

Note•
When connecting to the xDSL line, select the same line type as you are subscribing to in
Telephone line type .
Setting the Telephone Line Type
•
Connecting to an xDSL
A.
Analog Subscriber Line
B.
xDSL modem (splitter may not be built-in to the modem)
C.
Computer
D.
Telephone or answering machine
Important
•
When the splitter is not built-in to the modem, do not branch the telephone line before the splitter
(wall side). And also, do not connect splitters in parallel. The machine may not be able to...

Setting the Telephone Line TypeBefore using your machine, make sure you set the correct telephone line type for your telephone line. If you
are unsure of your telephone line type, contact your telephone company. For xDSL or ISDN connections,
contact the telephone company or service provider to confirm your line type.
Note
•
Telephone line type  will not appear in countries or regions where  Rotary pulse is not supported.
•
You can print USER'S DATA LIST to check the current setting.
Summary of...

Setting the Receive ModeSet the receiving operation (receiving mode).
For details on how to set the receive mode:
Setting the Receive Mode
You can select the appropriate mode.
For details on the selectable receive mode:
About the Receive Mode
For details on the advanced settings of the receive mode:
Advanced Settings of Receive Mode
Note
•
The receiving operation procedure varies depending on the selected receive mode. For details on receiving method depending on each receive mode:
Receiving Faxes
•
If...

•DRPD is available only in the US and Canada.•
Network switch  may not be available depending on the country or region of purchase.
•
Refer to Receiving Faxes  for information on receiving faxes or the procedure for each receive
mode.
About the Receive Mode You can select the receive mode suitable for your fax use conditions: whether you use a dedicated line for
fax, etc.
Receive
modeYour fax use conditionReceiving operationTEL priority
modeWhen mainly receiving voice
calls (with a telephone or
answering...

◦RX start time
You can specify the length of time until automatic reception is started when  Manual/auto switch:
ON  is selected. Specify the length of time and tap  OK.◦
User-friendly RX: ON /User-friendly RX: OFF
If you select  User-friendly RX: ON , the machine automatically switches from telephone calling to
fax reception by detecting the fax signal (CNG signal) when you lift the handset of the telephone
or the answering machine answers. When you have an answering machine connected to the
machine,...

Specify the number of time and tap OK.
Setting the DRPD Ring Pattern (US and Canada only) If you have subscribed to a Distinctive Ring Pattern Detection (DRPD) service provided by your telephonecompany, your telephone company will assign two or more telephone numbers with distinctive ring
patterns to your single telephone line, allowing you to have different numbers for fax calls and voice calls
using only one telephone line. Your machine will automatically monitor the ring pattern, and will...

Setting the Sender InformationYou can set the sender information such as date/time, unit name, and unit fax/telephone number.
About the Sender Information
Setting the Date and Time
Setting Daylight Saving Time (Summer Time)
Registering User Information
About the Sender InformationIf the unit name and unit fax/telephone number are registered, they are printed with date and time as
sender information on the recipient's fax.
A.
Date and time of transmission
B.
Unit fax/telephone number
C.
Unit name
D....

1.Make sure that the machine is turned on.2.
Flick the HOME screen, then tap  Setup .
Using the Operation Panel
3.
Tap  Device settings .
4.
Tap Device user settings .
5.
Tap Date/time setting .
6.
Set the date.
1.
Tap a setting item to change.
2.
Tap the number to enter.
Enter only the last two digits of the year.
3.
Tap OK.
4.
Tap  OK again when all settings are completed.
7.
Set the time.
1.
Tap a setting item to change.
789 

2.
Tap the number to enter.
Enter the date and time in 24-hour format.
3.
Tap OK.
4.
Tap  OK again when all settings are completed.
8.
Press the  HOME button to return to the HOME screen.
Setting Daylight Saving Time (Summer Time) Some countries adopt the daylight saving time (summer time) system that shifts the clock time forward at
certain periods of the year.
You can set your machine to automatically change the time by registering the date and time that daylight
saving time (summer time) begins and...