Canon Pixma Mg2924 User Guide
Have a look at the manual Canon Pixma Mg2924 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
The E-mail Client You Want to Use Does Not Appear in the Screen for Selecting an E-mail Client Check Check that the e-mail client's MAPI is enabled. Refer to the e-mail client's manual for how to set MAPI. If the problem is not solved even when MAPI is enabled, select None (Attach Manually) in the screen for selecting an e-mail client, then manually attach the image to the outgoing e-mail. 651
Problems with the Machine The Machine Cannot Be Powered On The Machine Turns Off Unintentionally Cannot Connect to Computer with a USB Cable Properly Cannot Communicate with the Machine with USB Connection FINE Cartridge Holder Does Not Move to the Position for Replacing Printer Status Monitor Is Not Displayed 652
The Machine Cannot Be Powered On Check1 Press the ON button. Check2 Make sure that the power plug is securely plugged into the power cord connector of the machine, then turn it back on. Check3 Unplug the machine from the power supply, then plug the machine back in and turn the machine back on after leaving it for at least 2 minutes. If the problem is not resolved, contact the service center. 653
The Machine Turns Off Unintentionally Check Deactivate the setting to turn the unit off automatically. The machine turns off automatically according to the elapsed time you specified if you activate the setting to turn the unit off automatically. If you do not want the machine to turn off automatically, open the printer driver setup window and in Auto Power under the Maintenance sheet, select Disable for Auto Power Off . Note • You can activate the setting to turn the machine on/off automatically from the operation panel of the machine or ScanGear (scanner driver). • From the operation panel of the machine: Turning on/off the Machine Automatically • From ScanGear (scanner driver): Scanner Tab 654
Cannot Connect to Computer with a USB Cable ProperlyPrinting or Scanning Speed Is Slow/Hi-Speed USB Connection Does Not Work/"This device can perform faster" Message Is Displayed If your system environment is not fully compatible with Hi-Speed USB, the machine will operate at a lower speed provided under USB 1.1. In this case, the machine operates properly but printing or scanning speed may slow down due to communication speed. Check Check the following to make sure that your system environment supports Hi- Speed USB connection. • Does the USB port on your computer support Hi-Speed USB connection? • Does the USB cable or the USB hub support Hi-Speed USB connection? Be sure to use a certified Hi-Speed USB cable. We recommend that the cable is no longer than around 10 feet / 3 meters. • Does the operating system of your computer support Hi-Speed USB connection? Obtain and install the latest update for your computer. • Does the Hi-Speed USB driver operate properly? Obtain the latest version of the Hi-Speed USB driver compatible with your hardware and reinstall it on your computer. Important • For details on Hi-Speed USB of your system environment, contact the manufacturer of your computer, USB cable, or USB hub. 655
Cannot Communicate with the Machine with USB Connection Check1 Make sure that the machine is turned on. Check2 Make sure that the USB cable is connected properly. See Connecting the Machine to the Computer Using a USB Cable to connect the USB cable properly. Check3 Do not start up IJ Network Tool while printing. Check4 Do not print while IJ Network Tool is running. Check5 Make sure that Enable bidirectional support is selected in the Ports sheet of the properties dialog box of the printer driver. How to Open the Printer Driver Setup Window 656
FINE Cartridge Holder Does Not Move to the Position for Replacing Check1 Is the ON lamp off? Check if the ON lamp is lit. The FINE cartridge holder will not move unless the power is on. If the ON lamp is off, close the cover and turn the machine on. Check2 Is the Alarm lamp flashing? Close the cover, confirm the number of times the Alarm lamp is flashing, take the appropriate action to resolve the error, and then reopen it. For details on how to resolve the error, see Support Code List . Check3 Has the cover been left open for 10 minutes or longer? If the cover is left open for more than 10 minutes, the FINE cartridge holder moves to the position to protect it to prevent the print head from drying out. Close and reopen the cover to return the FINE cartridge holder to the position for replacing. Check4 Has the machine been printing continuously for a long period? If the machine has been printing continuously for a long time, the FINE cartridge holder may not move to the position for replacing since the print head may overheat. Note • Do not open the cover while printing is in progress; otherwise, an error occurs. 657
Printer Status Monitor Is Not Displayed Check1 Is the printer status monitor enabled? Make sure that Enable Status Monitor is selected on the Option menu of the printer status monitor. 1. Open the printer driver setup window. How to Open the Printer Driver Setup Window 2. On the Maintenance sheet, click View Printer Status . 3. Select Enable Status Monitor on the Option menu if it is not selected. 658
Problems with Installation/Downloading Cannot Install the MP Drivers Easy-WebPrint EX Does Not Start Up or Easy-WebPrint EX Menu Does Not Appear How to Update MP Drivers in Network Environment Uninstalling IJ Network Tool 659
Cannot Install the MP Drivers• If the installation does not start even after the Setup CD-ROM is inserted into your computer'sdisc drive: Start the installation following the procedure below. 1. Select items as shown below. ◦ In Windows 8.1 or Windows 8, select Explorer icon in the Taskbar on the Desktop , then select Computer from the list on the left. ◦ In Windows 7 or Windows Vista, click Start then Computer . ◦ In Windows XP, click Start then My Computer . 2. Double-click the CD-ROM icon on the displayed window. If the contents of the CD-ROM are displayed, double-click MSETUP4.EXE. If you cannot install the MP Drivers with the Setup CD-ROM, install them from our website. Note • If the CD-ROM icon is not displayed, try the following: • Remove the CD-ROM from your computer, then insert it again. • Restart your computer. If the icon is not yet displayed, try different discs and see if they are displayed. If other discs are displayed, there is a problem with the Setup CD-ROM. In this case, contact the service center. • If you are unable to proceed beyond the Printer Connection screen: 660