Canon Pixma Mg2924 User Guide
Have a look at the manual Canon Pixma Mg2924 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
The Administrator Password Set to the Machine Was ForgottenInitialize the machine settings. Initializing the Machine Settings After initializing the machine settings, perform setup with the Setup CD-ROM or perform it according to the instructions on our website. 601
Checking Information about the Network Checking the IP Address or the MAC Address of the Machine Checking the IP Address or the MAC Address of the Computer Checking If the Computer and the Machine, or Computer and the Access Point Can Communicate Checking the Network Setting InformationChecking the IP Address or the MAC Address of the Machine To check the IP address or the MAC address of the machine, print out the network setting information. Printing Out Network Setting Information To display the network setting information using IJ Network Tool, select Network Information on the View menu. Canon IJ Network Tool Screen Checking the IP Address or the MAC Address of the Computer To check the IP address or MAC address assigned to the computer, follow the procedure below. 1. Select Command Prompt as shown below. • In Windows 8.1 or Windows 8, select Command Prompt from the Start screen. If Command Prompt is not displayed on the Start screen, select the Search charm, then search for " Command Prompt ". • In Windows 7, Windows Vista, or Windows XP, click Start > All Programs > Accessories > Command Prompt . 2. Enter "ipconfig/all" and press the Enter key. The IP addresses and the MAC addresses of the network devices installed on your computer are displayed. When the network device is not connected to the network, the IP address is not displayed. Checking If the Computer and the Machine, or Computer and the Access Point Can Communicate To check that communication is available, perform the ping test. 1. Select Command Prompt as shown below. • In Windows 8.1 or Windows 8, select Command Prompt from the Start screen. If Command Prompt is not displayed on the Start screen, select the Search charm, then search for " Command Prompt ". • In Windows 7, Windows Vista, or Windows XP, click Start > All Programs > Accessories > Command Prompt . 2. Type the ping command and the IP address of the target machine or the target access point, and then press the Enter key. ping XXX.XXX.XXX.XXX 602
"XXX.XXX.XXX.XXX" is the IP address of the target device.If the communication is available, a message such as the following is displayed.Reply from XXX.XXX.XXX.XXX: bytes=32 time=10ms TTL=255 When Request timed out is displayed, the communication is not available. Checking the Network Setting Information To check the network setting information of the machine, print out the network setting information. Printing Out Network Setting Information 603
Packets Are Sent SteadilyWhile IJ Network Scanner Selector EX is enabled, it periodically transmits packets to check whether it can communicate with the machine over the network. When using the computer in a network environment other than the one used to set up the machine, disable IJ Network Scanner Selector EX. To disable IJ Network Scanner Selector EX, right-click the icon on the notification area on the desktop, then select Disable Canon IJ Network Scanner Selector EX . 604
How to Restore the Machine's Network Settings to Factory Default Important • Note that initialization erases all network settings on the machine, and printing or scanning operationfrom a computer over network may become impossible. To use the machine over network, perform setup with the Setup CD-ROM or perform it according to the instructions on our website. Follow the procedure below to initialize the network settings. 1. Press and hold the Stop button until the Alarm lamp flashes 17 times. 2. Release the Stop button. The network settings are initialized. 605
Problems with Printing Printing Does Not Start Paper Jams Paper Does Not Feed Properly/"No Paper" Error Occurs Copying/Printing Stops Before It Is Completed 606
Printing Does Not Start Check1 Make sure that the power plug is securely plugged in, then press the ON button to turn the machine on. While the ON lamp is flashing, the machine is initializing. Wait until the ON lamp stops flashing and remains lit. Note • When printing large data such as a photo or graphics, it may take longer to start printing. While the ON lamp is flashing, the computer is processing data and sending it to the machine. Wait until printing starts. Check2 Make sure that the machine is connected to your computer properly. When the machine is connected to your computer with a USB cable, make sure that the USB cable is securely plugged in to the machine and the computer, then check the followings: • If you are using a relay device such as a USB hub, disconnect it, connect the machine directly to thecomputer, and try printing again. If printing starts normally, there is a problem with the relay device. Consult the reseller of the relay device for details. • There could also be a problem with the USB cable. Replace the USB cable and try printing again. When you use the machine over LAN, make sure that the machine is set up to be used over network correctly. Check3 Is the access point mode enabled? When you print using a mode other than the access point mode, disable the access point mode in advance. Check4 If you are printing from the computer and there are any unnecessary print jobs, delete them. Deleting the Undesired Print Job Check5 Make sure that your machine's name is selected in the Print dialog box. The machine will not print properly if you are using a printer driver for a different printer. Make sure that "Canon XXX series Printer" (where "XXX" is your machine's name) is selected in the Print dialog box. Note • To make the machine the one selected by default, select Set as Default Printer. Check6 Configure the printer port appropriately. Make sure that the printer port is configured appropriately. 1. Log on as a user account with administrator privilege. 2. Select items as shown below. • In Windows 8.1 or Windows 8, select Control Panel from the Settings charm on Desktop > Hardware and Sound > Devices and Printers . • In Windows 7, select Devices and Printers from the Start menu. • In Windows Vista, select the Start menu > Control Panel > Hardware and Sound > Printers . • In Windows XP, select the Start menu > Control Panel > Printers and Other Hardware > Printers and Faxes . 607
3.Open the properties of the printer driver for the machine.• In Windows 8.1, Windows 8, or Windows 7, right-click the "Canon XXX Printer" icon (where "XXX" is your machine's name), then select Printer properties. • In Windows Vista or Windows XP, right-click the "Canon XXX Printer" icon (where "XXX" is your machine's name), then select Properties. 4. Click the Ports tab to confirm the port settings. Make sure that a port named "USBnnn" (where "n" is a number) with "Canon XXX Printer" appearing in the Printer column is selected for Print to the following port(s) . Note • When the machine is used over LAN, the port name of the machine is displayed as "CNBJNP_xxxxxxxxxx". "xxxxxxxxxx" is the character string generated from the MAC address or a character string specified by the user when setting up the machine. • If the setting is incorrect: Reinstall the MP Drivers with the Setup CD-ROM or install them from our website. • Printing does not start even though the machine is connected to the computer using a USB cable and the port named "USBnnn" is selected: In Windows 8.1 or Windows 8, select My Printer on the Start screen to start My Printer. If My Printer is not displayed on the Start screen, select the Search charm, then search for " My Printer". Set the correct printer port on Diagnose and Repair Printer . Follow the on-screen instructions to set the correct printer port, then select your machine's name. In Windows 7, Windows Vista, or Windows XP, click Start and select All programs , Canon Utilities , Canon My Printer , Canon My Printer , then select Diagnose and Repair Printer . Follow the on- screen instructions to set the correct printer port, then select your machine's name. If the problem is not resolved, reinstall the MP Drivers with the Setup CD-ROM or install them from our website. • Printing does not start even though the port named "CNBJNP_xxxxxxxxxx" is selected when the machine is used over LAN: Launch IJ Network Tool, and select "CNBJNP_xxxxxxxxxx" as you confirmed in step 4, then associate the port with the printer using Associate Port in the Settings menu. If the problem is not resolved, reinstall the MP Drivers with the Setup CD-ROM or install them from our website. Check7 Is the size of the print data extremely large? Click Print Options on the Page Setup sheet on the printer driver. Then, set Prevention of Print Data Loss in the displayed dialog to On. * When On is selected for Prevention of Print Data Loss , print quality may be reduced. Check8 Restart your computer if you are printing from the computer. 608
Paper JamsWhen paper is jammed, the Alarm lamp flashes and a troubleshooting message is displayed on the computer screen automatically. Take the appropriate action described in the message. For details on how to remove the jammed paper, refer to Support Code List (When Paper Is Jammed) . Note • You can confirm the actions against errors with Support Codes on your computer by searching a Support Code. Click Here to Search 609
Paper Does Not Feed Properly/"No Paper" Error Occurs Check1 Make sure that paper is loaded. Loading Paper Check2 Make sure of the following when you load paper. • When loading two or more sheets of paper, align the edges of the sheets before loading. • When loading two or more sheets of paper, make sure that the paper stack does not exceed the paper load limit. However, proper feeding of paper may not be possible at this maximum capacity depending on the type of paper or environmental conditions (either very high or low temperature and humidity). In such cases, reduce the sheets of paper you load at a time to less than half of the paper load limit. • Always load the paper in portrait orientation, regardless of the printing orientation. • When you load the paper, load the paper with the print side facing UP. Align the paper stack against the right side of the rear tray and slide the paper guide so that it just touches the left edge of the stack. Loading Paper Check3 Check to see if the paper you are printing on is not too thick or curled. Media Types You Cannot Use Check4 Make sure of the following when you load envelopes. • When printing on envelopes, refer to Loading Paper , and prepare the envelopes before printing. Once you have prepared the envelopes, load them in portrait orientation. If the envelopes are placed in landscape orientation, they will not feed properly. Check5 Confirm that the media type and the paper size settings correspond with the loaded paper. Check6 Make sure that there are not any foreign objects in the rear tray. If the paper tears in the rear tray, see Paper Jams to remove it. If there are any foreign objects in the rear tray, be sure to turn off the machine, unplug it from the power supply, then remove the foreign object. 610