Canon Imageprograf Ipf825 User Guide

Installation problems
Removing Installed Printer Drivers .................................................................................................................. 875Removing Installed Printer Drivers
Follow these steps to remove installed printer drivers and utilities. Removing printer drivers (Windows)
Remove the printer driver as follows. Note
• In Windows 2000/Windows XP/Windows Server 2003/Windows Vista/Windows Server 2008, you must log
on with administrative rights, such as those of the...

3.
Select  imagePROGRAF Status Monitor, and then click the  Change/Remove button.Removing imagePROGRAF Device Setup Utility (Windows)
Remove imagePROGRAF Device Setup Utility as follows.
1. From 
the Windows  start menu, select  Programs > imagePROGRAF Device Setup Utility >  Uninstaller (image-
PROGRAF Device Setup Utility) to start the wizard.
2. In the wizard window, click  Delete, and then click Next.
3. Follow the instructions on the screen to remove imagePROGRAF Device Setup Utility....

HP-GL/2 problems
Lines or images are missing in the HP-GL/2 data that was printed. ...............................................................877
Lines Are Printed Too Thick or Thin During HP-GL/2 Printing ........................................................................877
HP-GL/2 jobs are printed in monochrome (or color). ...................................................................................... 877
Printed Colors in Line Drawings are Inaccurate During HP-GL/2 Printing...

HP-GL/2 jobs are printed 6 mm larger than specified
Cause
Corrective Action
The page size of the HP-GL/2 print job, as created in the source ap-
plication, is incorrect. In MAIN MENU
, set PageSizeProcess1  to On.
 (See " Main Menu Settings.") →P.730
HP-GL/2 jobs are printed at maximum size, even if a standard size is specified
Cause
Corrective Action
The page size of the HP-GL/2 print job, as cre-
ated in the source application, is incorrect. In MAIN MENU
, set PageSizeProcess2  or Conserve...

Other problems
The printer does not go on .............................................................................................................................. 879
 
If the Printer Makes a Strange Sound ............................................................................................................. 880
 
Messages advising to check the maintenance cartridge are not cleared ........................................................880
 
The printer consumes a lot of ink...

If the Printer Makes a Strange Sound
Cause
Corrective Action
The printer
makes a
sound during
operation. The following sounds do not indicate a problem with the printer.
• There is a sound of vacuum from the Platen
To 
prevent paper from rising, paper is held against the Platen by suction from Vacuum holes under
it.
• There is a sound when a different size of paper is used and when the Carriage goes from side to side
This may happen especially when using B0 or 44-inch paper.
When paper of a different...

The printer consumes a lot of ink
Cause
Corrective Action
Many full-page color im-
ages are printed. In print jobs such as photos, images are filled with color. This consumes a lot of ink.
This does not indicate a problem with the printer.
Head Cleaning B is used
often. Head Cleaning B consumes a lot of ink. This does not indicate a problem with the
printer. Unless the printer has been moved or stored for a long period or you are trou-
bleshooting Printhead problems, we recommend not performing 
Head...

2.
Press ▲ or ▼ to select  Information, and then press the  OK button.3.
A confirmation message is shown on the Display Screen about disabling ink level detection. After checking the mes-
sage, press the ▶ button. 4.
After checking the message, press the  ▶ button.5.
Press ▲ or ▼ to select  Yes, and then press the OK  button.Troubleshooting 
> Other problems >
Ink level detection
iPF82512
882
 

6.
Check the message and press the  ▶ button.7.
Check the message and press the  ▶ button.8.
Press ▲ or ▼ to select  Yes, and then press the OK  button.9.
A confirmation  message  about  updating  ink  information  is  shown  on  the  Display  Screen.  After  checking  the  mes-
sage, press the  ▶ button. Troubleshooting 
> Other problems >
iPF825
Ink level detection 12
883
 

10.
Press ▲ or ▼ to select  Yes, and then press the  OK button.Ink level detection is now disabled, and the printer goes online.
Troubleshooting > Other problems >
Ink level detection
iPF82512
884