Canon Imageprograf Ipf825 User Guide

Frequently Asked Questions
Frequently Asked Questions ........................................................................................................................... 845Frequently Asked Questions
This section presents frequently asked questions and answers. To view more detailed explanations, click the hyperlinks in
the answer column. Question
Answer
How do I print on a
roll? When printing on rolls, after loading the roll, specify the paper type and length, both on the
Control Panel and in...

Question
Answer
How do I print without
wasting all the blank
space on the right side
when printing an A4-
sized original at A3
size? By specifying to rotate originals 90 degrees in the printer driver, you can print at A4 size to
fill the width of A3 paper.
⇒"Conserving Roll Paper by Rotating Originals 90 Degrees →P.169
"
How do I print in land-
scape (or portrait) ori-
entation? You can print originals that are in landscape (or portrait) orientation automatically enlarged
to fit the roll width....

Problems Regarding Paper
Clearing Jammed Roll Paper .......................................................................................................................... 847
Clearing a Jammed Sheet ............................................................................................................................... 851
 
Troubleshooting When Paper Jams are not Found
......................................................................................... 853
 
Roll Paper Cannot be Inserted...

Important
• Do not touch the Linear Scale (a), Carriage Shaft (b), or Ink Tube Stabilizer (c). Touching these parts
may damage them. 4.
If the Cutter is out, move the Cutter to the right side, away from the paper. Important
• If 
the  Cutter  is  on  the  left  side,  be  sure  to  move  it  to  the  right.  If  the  Cutter  is  on  the  left  side  when
you turn the printer on, the printer may rip the paper.
Troubleshooting 
> Problems Regarding Paper >
Clearing Jammed Roll Paper
iPF82512
848
 

5.
Lift the Release Lever. 6.
Holding  the  paper  on  both  sides,  pull  the  jammed  portion  out  toward  the  front.  Use  a  scissors  or  cutting  tool  to  cut
away the printed or wrinkled portion. Caution
• When cutting paper, be careful to avoid injury and damaging the printer. Troubleshooting 
> Problems Regarding Paper >
iPF825
Clearing Jammed Roll Paper 12
849
 

7.
If the Carriage is on the left, move the Carriage to the right until it stops. Important
• Always move the Carriage to the right side. If the Carriage is on the left, a Carriage error may occur
when you turn on the printer.
8. Hold 
the  edge  of  the  roll  paper  in  the  middle  as  you  gently  pull  it  evenly  to  the  position  of  the  Ejection  Guide  (a).
Align  the  right  side  of  the  roll  paper  with  the  Paper  Alignment  Line  (b),  keeping  this  side  parallel  to  the  line,...

9.
Close the Top Cover. 10.
Turn the printer on.   (See "Turning the Printer On and Off.") →P.702
The roll is now advanced. After it is finished being advanced, you can resume printing. Note
• You can ensure that the edge is cut neatly by selecting  Paper Cutting in the printer menu.
 (See "Specifying the Cutting Method for Rolls .") →P.654
Clearing a Jammed Sheet
If a sheet jams, follow the steps below to remove it.
1. Turn the printer off.   (See "Turning the Printer On and...

Important
• Do not touch the Linear Scale (a), Carriage Shaft (b), or Ink Tube Stabilizer (c). Touching these parts
may damage them. 4.
Lift the Release Lever. 5.
Hold the paper and pull it out, toward the front. Troubleshooting 
> Problems Regarding Paper >
Clearing a Jammed Sheet
iPF82512
852
 

Note
• If you  do  not  find  any  scraps  or  jams,  see  "Troubleshooting  When  Paper  Jams  are  not  Found ."→P.853
6. If the Carriage is on the left, move the Carriage to the right until it stops. Important
• Always 
move the Carriage to the right side. If the Carriage is on the left, a Carriage error may occur
when you turn on the printer.
7. Lower the Release Lever and close the Top Cover. 8.
Turn the printer on.   (See "Turning the Printer On and Off.") →P.702
Troubleshooting...

3.
Holding the Roll Unit Lever (a), pull out the Roll Unit. 4.
Check for paper in the lower part of the printer. Remove any jammed paper here by pushing it to the floor with your
fingers. 5.
Lift the Release Lever. Troubleshooting 
> Problems Regarding Paper >
Troubleshooting When Paper Jams are not Found
iPF82512
854