Canon Imageprograf Ipf825 User Guide

Important
• Do not touch the Linear Scale (a), Carriage Shaft (b), or Ink Tube Stabilizer (c). Touching these parts
may damage them.
Avoid cleaning where the Carriage is retracted, in position (d) or (e). Note
• If the Cleaning Brush is dirty, rinse it in water. Maintenance 
> Cleaning the Printer >
iPF825
Cleaning Inside the Top Cover 11
835
 

3.
Using a  damp  cloth  that  you  have  wrung  out  completely,  wipe  away  dirt  or  paper  dust  (debris  from  cutting)  inside
the Top Cover.
Wipe away any ink residue and paper dust (debris from cutting) on the Top Cover Roller (a), all over the Platen (b),the Paper Retainer (c), the Borderless Printing Ink Grooves (d), the Ejection Guide (e), the blue Switch (f), the sec-
tion around the right-side Borderless Printing Ink Grooves (g), and so on. Important
• Do 
not  use  a  dry  cloth  to  wipe...

Other Maintenance
Preparing to Transfer the Printer ..................................................................................................................... 837
Updating the Firmware .................................................................................................................................... 843Preparing to Transfer the Printer
To protect the internal parts in transit, always follow the steps below before transferring the printer to a new location. Refer
to the Setup...

Level
Shipping Meth-
od (Example) Permitted Angle of Inclination Amount of
Ink to Dis- pose of Required
Mainte-
nance Car- tridges(*1)
3 Tipping the printer or hold-
ing it upright for
elevators or
stairs Lengthwise: 0°–90°
Rotation: 0°–30°
Approx. 700
ml2 or 3 *1: The quantity of cartridges required depends on the capacity of the Maintenance Cartridge in use.
1. Remove the Wheeled Output Stacker from the printer.
 (See "Using the Wheeled Output Stacker .") →P.671
2. Remove the paper.
•Rolls...

8.
Open the Ink Tank Cover. 9.
Lift the  stopper  (a)  of  the  Ink  Tank  Lock  Lever  (a).  Lift  the  Ink  Tank  Lock  Lever  until  it  stops,  and  then  push  it
down to the front. 10.
Remove the Ink Tank. Maintenance 
> Other Maintenance >
iPF825
Preparing to Transfer the Printer 11
839
 

Note
• Store the Ink Tank you removed in the box with the ink holes (a) facing up. Otherwise, ink may leak
and cause stains. 11.
Repeat steps 9 and 10 to remove all ink tanks.
12. Push down the release lever (a) as shown as you gently return all ink tank lock levers to the original position. 13.
Close the Ink Tank Cover. Maintenance 
> Other Maintenance >
Preparing to Transfer the Printer
iPF82511
840
 

At this point, ink is drawn out from inside the tubes.
Important
• Do not remove the Maintenance Cartridge during this process.
When the process is finished, " Finished preparing to move printer. Turn off printer. " is displayed.
14. Press the Power  button and turn off the printer. Important
• Turn off  the  printer  before  you  unplug  it.  It  may  damage  the  printer  if  you  unplug  it  before  it  is  off
and  transfer  it  in  that  state.  If  you  accidentally  unplug  the  printer,...

Important
• Here, the  Belt  Stopper  is  the  one  that  was  removed  and  stored  after  initial  installation.  Neglecting  to
attach the Belt Stopper may damage the printer.
• Do not touch the Linear Scale (a), Carriage Shaft (b), or Ink Tube Stabilizer (c). Touching these parts
may damage them. 17.
Close the Top Cover. 18.
Tape down printer covers to secure them, in the reverse order of tape removal during installation.
19. Remove the Stand by reversing the installation procedure, when it was...

Updating the Firmware
Update the printer firmware to take advantage of new and improved printer functions.
Confirming the firmware version
1. Press the Menu button to display MAIN MENU. 2.
Press  ▲ or ▼ to select  Information, and then press ▶.
3. Press  ▲ or ▼ to select  System Info, and then press the  OK button.
The firmware version is displayed. Updating the Firmware
To obtain the latest firmware, visit the Canon website. If the firmware available online is newer than the installed firmware,
update...

Troubleshooting
Frequently Asked Questions
845Problems Regarding Paper
847Printing does not start
858The printer stops during a print job
860Problems with the printing quality
861Cannot print over a network
873Installation problems
875HP-GL/2 problems
877Other problems
879Troubleshooting >
iPF82512
844