Canon Imageprograf Ipf825 User Guide

6.
At this point, open the Maintenance Cartridge Cover. 7.
Hold the used Maintenance Cartridge by the grip (a) with one hand and put your other hand under the Maintenance
Cartridge to hold it firmly on the bottom, keeping it level as you pull it out. Important
• Used 
maintenance cartridges are heavy. Always grasp the cartridge firmly and keep the cartridge lev-
el  during  removal  and  storage.  If  you  drop  a  used  Maintenance  Cartridge  or  store  it  at  an  angle,  ink
may leak and cause...

8.
Open the box, remove the plastic bag, packaging material, and Shaft Cleaner (a), and then take out the Maintenance
Cartridge (b). Important
• Never touch the metal contacts (a). This may damage the Maintenance Cartridge. 9.
Keep 
the used Maintenance Cartridge level as you put it in the plastic bag. Expel excess air from the plastic bag and
seal the zipper. Maintenance 
> Maintenance Cartridge >
Replacing the Maintenance Cartridge
iPF82511
826
 

10.
Confirm  the Maintenance Cartridge is right-side up, put it in the box with the packaging material attached, and store
it so that it stays level. Important
• Always 
put the used Maintenance Cartridge back in the box and store the box on a flat surface. Other-
wise, ink may leak and cause stains.
• In  accordance  with  corporate  environmental  protection  policies,  Canon  collects  used  maintenance
cartridges. Follow the instructions provided with the new Maintenance Cartridge that describe how...

12.
Keeping the new Maintenance Cartridge level, insert it all the way in. 13.
Close the Maintenance Cartridge Cover. 14.
Press the OK  button. The printer now initializes the Maintenance Cartridge.
Next, replace the Shaft Cleaner.
Replacing the Shaft Cleaner
Replace the Shaft Cleaner when you replace the Maintenance Cartridge. New Shaft Cleaner is included with replacement
Maintenance Cartridge. Maintenance > Maintenance Cartridge > Replacing the Maintenance Cartridge
iPF82511
828
 

After you execute 
Repl. maint cart and replace the Maintenance Cartridge, a message will appear on the Display Screen
requesting you to replace the Shaft Cleaner. Select  Yes and press the OK button. Next, go to step 4.
1. Press the Menu button to display  MAIN MENU.2.
Press  ▲ or ▼ to select  Maintenance, and then press the  ▶ button.
3. Press  ▲ or ▼ to select  Repl. S. Cleaner, and then press the ▶ button.
4. Press ▲ or ▼ to select  Yes, and then press the OK  button.
After the Carriage is moved, the...

6.
Hold the Shaft Cleaner on the right side of the Carriage by the grips (a) and pull it toward you to remove it. Important
• Do not touch the Linear Scale (a), Carriage Shaft (b), or Ink Tube Stabilizer (c). Touching these parts
may damage them. 7.
After removing the cap of the new Shaft Cleaner, hold it by the grips (a) and attach it to the Carriage.
Push the Shaft Cleaner until it clicks into place. Maintenance 
> Maintenance Cartridge >
Replacing the Maintenance Cartridge
iPF82511
830
 

Note
• Attach the cap from the new Shaft Cleaner on the used one. Be sure to put the used Shaft Cleaner in
the small box before putting it in the larger box with the used Maintenance Cartridge for disposal.
8. Close the Top Cover. The Carriage is moved, and the printer goes online.
Checking the Remaining Maintenance Cartridge Capacity
The Maintenance Cartridge absorbs excess ink from borderless printing, printhead cleaning, and other processes. You can
confirm the remaining capacity of the Maintenance...

If a message for checking the Maintenance Cartridge is shown on the Display Screen
When the Maintenance Cartridge capacity is low, the Message lamp is lit and " Prepare for maint cart replacement." is
displayed. You can continue to print, but check the remaining Maintenance Cartridge capacity and prepare to replace the
Maintenance Cartridge with a new one.  (See "Checking the Remaining Maintenance Cartridge Capacity .") →P.831
When much of the Maintenance Cartridge capacity is depleted...

Cleaning the Printer
Cleaning the Printer Exterior ........................................................................................................................... 833
Cleaning Inside the Top Cover ........................................................................................................................ 833
  Cleaning the Printer Exterior
Clean the printer regularly to maintain better printing quality and help prevent problems.
About once a month, clean the printer exterior.
1....

•
After borderless printing
•
After printing on small paper
•
After printing on paper that generates a lot of cutting debris
•
If you have replaced the roll
•
After printing on paper that generates a lot of paper dust
•
If the message "Blue platen switch is dirty.
" is displayedImportant
• If the Platen inside the Top Cover becomes dirty, it may soil the underside of paper. We recommend cleaning
the Platen after borderless printing or printing on small paper.
• If the Ejection Guide is dirty, it...