Canon Imageprograf Ipf825 User Guide

3.
If a password has been set on the printer, enter the password.
4. Click Information in the  Device Manager menu at left to display the  Information page.
5. To 
display  the  relevant  settings  page,  click  Edit  in  the  upper-right  corner  of Device  Information  or Security,  de-
pending on what information you want to specify.
6. Refer to the table of settings for device information and security as you complete these settings.
Device Information Settings Item
DetailsDefault Setting
Device Name...

Configuring the Communication Mode Manually
This topic gives instructions for configuring the communication mode manually.
1. Press the Menu button to display  MAIN MENU.2.
Press ▲ or ▼  to select Interface  Setup, and then press the  ▶ button.
3. Press  ▲ or ▼ to select  Ethernet Driver, and then press the  ▶ button.
4. Press ▲ or ▼  to select Auto Detect, and then press the  ▶ button.
5. Press  ▲ or ▼ to select  Off, and then press the  OK button.
Return to the  Ethernet Driver menu.
6. Press  ▲ or ▼...

12.
Press the Online  button.
After the confirmation message is displayed, press  OK.
The new settings will take effect after the printer restarts. Email Notification When Printing is Finished or Errors Occur
The printer can notify you of the printer status by email. Even when you are away from the printer, you can know when
printing is finished or if errors occur. Receive notification via email on your mobile phone or at your computer. Use the imagePROGRAF Status Monitor (Windows) function to set up...

1.
Start the  web  browser  and  enter  the  following  URL  in  the  Location  (or Address   )  box  to  display  the  RemoteUI
page.
http://printer IP address or name/
Example: http://xxx.xxx.xxx.xxx/
2. Select  Administrator Mode and click  Logon.
3. If a password has been set on the printer, enter the password.
4. Click  Network  in the Device Manager  menu at left to display the  Network page.
5. Click  Reset to Default settings  in the lower-right corner of the  Network Interface group.
6. After...

Network Setting (Windows)
Configuring the Printer Driver Destination  ...................................................................................................... 779
 
Configuring the Printer's NetWare Network Settings ...................................................................................... 780
Specifying the Printer's Frame Type ............................................................................................................... 781
Specifying NetWare Print...

Configuring the Printer's NetWare Network Settings
Follow the steps below to configure the  NetWare network settings.
1. Start  the  web  browser  and  enter  the  following  URL  in  the  Location  (or Address  )  box  to  display  the  RemoteUI
page.
http://printer IP address or name/
Example: http://xxx.xxx.xxx.xxx/
2. Select Administrator Mode  and click Logon.
3. If a password has been set on the printer, enter the password.
4. Click Network in the  Device Manager menu at left to display the...

Item
DetailsDefault
Setting
NDS PSer-
ver Tree Name
Specify the name of an NDS tree that has a NetWare print server.
(0–32 characters) —
Context Name Specify the name of a context that has a NetWare print server.
(0–255 characters) —
Print Server
Name Specify the name of a NetWare print server.
(0–64 characters) —
Print Server
Password Set a password for the print server.
(0–20 characters) —
Polling Interval Specify the interval to confirm jobs.
(1–255 seconds) 5
NPrinter Print Server Name Specify the...

6.
In IP Address ,  enter the IP address assigned to the printer, and then enter the subnet mask in  Subnet Mask and the
default gateway in  Gateway Address. Important
• You 
must specify the IP address here to be able to configure NetWare protocol settings using Remo-
teUI.
7. Click  Set.
8. Click  OK after the  Confirmation message dialog box is displayed.
9. Exit imagePROGRAF Device Setup Utility. Specifying the Frame Type Using the Printer Control Panel
1. Press the Menu button to display  MAIN...

10.
Press the Online  button to bring the printer online.
If any of the settings is changed, a message for confirmation is displayed. In this case, press the  OK button.Important
• Be sure to complete step 10. This will activate the values you have entered. Note
• If an error message is displayed, check the settings and correct any invalid values.
• To cancel the setup process, hold down the  Stop button for a second or more. Specifying NetWare Print Services
Before printing in a NetWare network, you...

When using queue server mode, all print server functions are supported, so there is no need for other print server
software  or  hardware.  In  NDS  queue  server  mode  (NDS  PServer),  the  NDS  print  server  is  used  for  printing.  In
bindery  queue  server  mode  (Bindery  PServer),  the  bindery  print  server  is  used  for  printing.  Note  that  if  you  use queue server mode, a NetWare user license is required for each network interface.
• Remote printer mode
In remote printer mode, the...