Canon Imageprograf Ipf825 User Guide

•
Printable Area
A  margin  of  3  mm  (0.12  in)  on  all  sides  is  required.  During  borderless  printing,  the  margin  on  all  sides  is  0  mm.  For
information  on  paper  compatible  with  borderless  printing,  see  the  Paper  Reference  Guide.    (See  "Types  of  Paper.")→P.623
•
Recommended Print Area
A margin of 20 mm (0.79 in) on top, 5 mm (0.20 in) on bottom, and 5 mm (0.20 in) on left and right sides is required.
Printer Parts 
> Printer Specifications >
iPF825
Print Area 9
765
 

Network Setting
Network Setting
767Network Setting (Windows)
779Network Setting (Mac OS X)
789Network Setting >
iPF82510
766
 

Network Setting
Network Environment ...................................................................................................................................... 767
 
Configuring the IP Address on the Printer ....................................................................................................... 769
Configuring the IP Address Using the Printer Control Panel .......................................................................770
Configuring the IP Address Using ARP and PING...

•
Mac OS X 10.2.8–10.4
• Compatible computer
•A computer that runs one of the above operating systems Note
• The printer cannot be used over a LocalTalk network.
• Compatible with EtherTalk Phase 2.
• The imagePROGRAF printer driver is not compatible with AppleTalk. •
Printing over a NetWare network
•Compatible servers
•Novell NetWare 4.2/5.1/6.0
• Compatible clients
•Windows 2000 (Professional or Server)
• Windows XP (Professional)
• Compatible computer
•A computer that runs one of the above operating...

•
Example of a Macintosh network
In Macintosh networks, print over AppleTalk (EtherTalk) or TCP/IP, using Bonjour (Zeroconf) functions.
Note
• The imagePROGRAF printer driver is not compatible with AppleTalk. •
Example of a NetWare network
Note
• Even if there is a NetWare server in your network environment, you can use it in conjunction with TCP/
IP or AppleTalk. In this case, complete the settings for each protocol you will use. Configuring the IP Address on the Printer
You must configure the...

Important
• If you  use  a  DHCP  server  for  automatic  assignment  of  the  printer's  IP  address,  printing  may  no  longer  be
possible  after  the  printer  is  turned  off  and  on.  This  is  because  an  IP  address  different  from  before  has  beenassigned.  Thus,  when  using  DHCP  server  functions,  consult  your  network  administrator  and  configure  the
settings in one of the following ways.
• Configure the setting for dynamic DNS updating
In  RemoteUI,  activate  the  setting...

7.
Press the ▲ or ▼  button to enter the value. Note
• Pressing the  ▲  button  increases  the  number  by  1.  The  maximum  value  is  255,  after  which  0  is  dis-
played.
• Pressing  the  ▼  button  decreases  the  number  by  1.  The  minimum  value  is  0,  after  which  255  is  dis-
played.
• Hold down ▲ or ▼ to increase or decrease the value continuously.
8. Repeat steps 6–7 to enter the IP address assigned to the printer.
9. Press the Online button to bring the printer online.
If any settings...

2.
In Windows, open a command prompt, or in Mac OS X, start Terminal.
3. Execute 
the following command to add entries to the ARP table for managing IP addresses and corresponding MAC
addresses.
arp -s [IP address] [the printer's MAC address you have verified]
Example: arp -s xxx.xxx.xxx.xxx 00-00-85-xx-xx-xx Note
• In 
Mac  OS  X  when  using  Terminal,  enter  the  arp  command  in  the  format  arp  -s  xxx.xxx.xxx.xxx
00:00:85:xx:xx:xx. For details, refer to the help file for the command line.
4....

Important
• Use Netscape Navigator 6.0 or later, Internet Explorer 5.01 or later, or Firefox 1.5 or later as a web browser.
In Mac OS X, you can also use Safari 1.32 or later or Safari 2.03 or later.
• Access is not possible via a proxy server. In environments where a proxy server is used, add the printer's IP
address to  Exceptions (addresses accessed without a proxy server) in the web browser proxy server settings.
(Settings may vary depending on the network environment.)
• Enable JavaScript and...

Item
DetailsDefault Setting
IPP Printer URI When using a standard Windows port for IPP printing, enter an
URL less than 255 bytes for all characters for  http://"IP ad-
dress"/IPP-URI. printer
RAW Printing Activate this setting to use Raw Printing. On
RAW Mode Bi-di-
rection Activate this setting to use Raw mode bidirectional communica-
tion. Off
FTP Printing Activate this setting to use FTP Printing. On
SMTP Server Ad-
dress Specify the SMTP server's IP address.
0.0.0.0
Primary DNS Serv-
er...