Canon Imageprograf Ipf825 User Guide

Setting Item
Description, InstructionsStor-
ed
Job Mail-
box
List (Enter
a
pass-
word
if one
has
been
set.) Job
List (Choo
se a
print
job)
Print
Print the saved job.
De-
lete Delete the saved job.
Print Job List Print a list of saved print jobs.Job
Log (Choo
se
from
infor-
ma-
tion
about
the
latest
three
print
jobs.)
Document Name
Displays the document name in the last print job.
User Name Displays the name of the user who sent the print job.
Page Count Displays the number of pages in the print job.
Job...

Setting Item
Description, InstructionsQuality Man-
ager
Print Quality
Choose the print quality.
Input Resolution Choose the printer input resolution, 600dpi or 300dpi.
Print (Economy) Although printing quality is diminished, less ink is con-
sumed than in regular printing. Select On to conserve ink.Paper Manag-
er
Paper Source
Choose the source of paper for HP-GL/2 printing.
Margin Specify the margin around paper. The margin for the trailing
edge of sheets is 23 mm (0.9 in).
However, if you have...

Setting Item
Description, InstructionsLine & Pen
Manager Pen Setup Define Palette
•If you choose Circle Setting Reset Palette
Restore Define Palette  to the default palette settings.
Smoothing Choose whether to print arcs as smooth curved lines or as
multiple connected line segments.
• If you choose Software
Operation 
is  determined  by  the  application.  If  nothing  is
specified  by  the  application,  the  result  is  as  shown  in  the
figure. Note: By default, this is a 72-sided figure
• If you...

Adjust Printer
Setting Item
Description, InstructionsAuto Head Adj.
Standard Adj.Choose Yes to have the printer print and read a test pattern
for the automatic adjustment of Printhead alignment rela-
tive to the printing direction.   (See "Automatic Straight-
ening of Lines and Colors (Auto Head Adj.) .") →P.676
Advanced Adj. Choose Yes to have the printer print and read a test pattern
for the automatic adjustment of Printhead alignment rela-
tive to the nozzle, ink tank, and printing direction....

Setting Item
Description, InstructionsTCP/IP IP Mode
Choose whether the printer IP address is configured automat-
ically or a static IP address is entered manually.Protocol DHCP Specify the protocol used to configure the IP address auto-
matically.
BOOTP
RARP IP Setting IP Address Specify the printer network information when using a static
IP address.
Enter the IP address assigned to the printer, as well as the
network subnet mask and default gateway.
Subnet Mask
Default G/W NetWare NetWare
Specify the...

Setting Item
Description, Instructions
Move Printer When transferring the printer to another location, choose
Yes and follow the instructions on the screen.  (See "Pre-
paring to Transfer the Printer .") →P.837
System Setup
Setting Item
Description, InstructionsWarning
BuzzerSet the buzzer. Choose On for the buzzer to sound once
for warnings and three times for errors.
Detect Mismatch Choose Warning for notification (display of a warning
message) during printing if the paper type specified in...

Setting Item
Description, InstructionsRoll Switching
No RollSwitchingPrints using the roll currently advanced on the Platen.
TrimEdge Reload Specify whether to trim the leading edge of the currently
retracted roll when the roll is advanced. Cut the edge if
you are concerned about any marks left on the roll when
the roll is left in the retracted position. Selecting  On will
always trim the edge when the roll is advanced from the
retracted position. Selecting  Automatic will trim the edge
when the roll has...

Setting Item
Description, InstructionsOutput Method
Save: Box 01 To print as usual, select 
Print. Selecting Print (Auto Del)
will print the job and then delete the data from the printer's
hard disk. Selecting  Save: Box 01 will only save the print
job in the box, without printing it.
Save and Print Select On to print the job after it has been saved.
Save: Shared Box Select Off to print without saving jobs in the box shared
among multiple users.
Show Job Log Selecting Off prevents display of the log...

Information
Setting Item
Description, InstructionsSystem Info
FirmwareDisplays the version of the printer and firmware.
Boot Displays the version of the boot ROM.
MIT Displays the version of the MIT database format.
s/n Displays the printer's serial number.
MAC Displays the MAC address.
IP Displays the IP address.
HDDSpace Displays the space available on the printer's hard disk.Error Log
1: xxxxxxxx-xxxx Displays the two most recent error message numbers,
most recent first.
2: xxxxxxxx-xxxx...

Information on the loaded paper
Here, the paper size, type, and related printer settings are displayed. Printer information
Displays the firmware version, serial number, free hard disk space, IP address, and interface information. HP-GL/2 setting information
HP-GL/2 settings information is displayed on three screens. Status Print
You can print a  Status Print report indicating the current status of the printer.
With  Status Print, information is printed regarding the printer firmware version, various...