Canon Imageprograf Ipf825 User Guide

•
Upper level menus are available if  ◀ is displayed at left in the top line. To access these upper level menus, press  ◀.Specifying menu items
Follow these steps to specify menu items.
1. Press  ▲ or ▼ to select a menu, and then press the  ▶ button.
Repeat these steps until the desired menu options are displayed.
2. Press ▲ or ▼ to select a setting item to complete, and then press the  OK button.
The check box at left is selected, and the setting is confirmed. After two seconds, the display reverts to...

2.
Press ▲ or ▼ to select  TCP/IP, and then press the  ▶ button.
3. Press ▲ or ▼ to select  IP Setting, and then press the  ▶ button.
4. Press ▲ or ▼ to select  IP Address, and then press the ▶ button.
5. Press  ◀ or ▶ to move the cursor (_) to each field for entering numbers. 6.
Press  ▲ or ▼ to enter the number, and then press the  OK button.Note
• Hold down ▲ or ▼ to increase or decrease the value continuously.
• Make 
sure the IP address you enter for the printer is not the same as any computer IP...

2.
Press ▲ or ▼ to select a setting item to execute, and then press the  OK button.After two seconds, the menu command is executed. After commands are executed, in most cases the printer reverts
to the state before the menu operation, either online or offline. Menu Structure
Main Menu
The structure of the main menu is as follows. Values at right indicated by an asterisk * are the defaults.
For instructions on menu operations,  see "Main Menu Operations." →P.713
For details on menu items,  see...

First Level
Second
Level Third Lev-
el Fourth
Level Fifth Level Sixth Level Seventh
Level Eighth Level Paper
Menu
Roll1(Upp
r) Type
(*1 →P.728
) (The paper type is displayed here.) (
*5 →P.729
) Roll1(Upp
r)Lngth
(*1
→P.728
),
(*2 →P.728
) ##.# m
### feet (*11 →P.729
)
Roll2
(Lwr)
Type
(*1 →P.728
) (The paper type is displayed here.) (
*5 →P.729
) Roll2(Lwr
) Lngth
(*1
→P.728
),
(*2 →P.728
) ##.# m
### feet (*11 →P.729
) ManageR-
emainRoll
Off *
On Paper De-
tails (The paper
type is dis-
played
here.)...

First Level
Second
Level Third Lev-
el Fourth
Level Fifth Level Sixth Level Seventh
Level Eighth Level Paper De-
tails (The paper
type is dis-
played
here.)
(*5
→P.729
) Scan Wait
Time
Area
(*12
→P.729
) Entire area *
Leading edge Feed Pri-
ority
Automatic *
Band Joint
Print Length
Adjust
Length A From –0.70% to 0.70%
Adjust
Length B From –0.70% to 0.70% Head
Height
Automatic *
Highest
High
Standard
Low
Lowest Skew
Check Lv.
Standard *
Loose
Off Vac-
uumStrng
th
Automatic *
Strongest
Strong
Standard...

First Level
Second
Level Third Lev-
el Fourth
Level Fifth Level Sixth Level Seventh
Level Eighth Level Paper De-
tails (The paper
type is dis-
played
here.)
(*5
→P.729
) Bordless
Margin
Automatic
Fixed CutDus-
tReduct.
Off
On NearEnd
Sht Mrgn
3mm
20mm Return
Defaults
No
Yes Job Man-
agement Print Job Job List (Choose a
print job.)
Delete
Preempt Jobs Stored Job Mailbox
List (Enter a
password if
one has
been set.) Job List Print
Delete Print Job
List
No
Yes Job Log (Choose
from infor-
mation
about the...

First Level
Second
Level Third Lev-
el Fourth
Level Fifth Level Sixth Level Seventh
Level Eighth Level GL2 Set-
tings Quality
Manager Color
Mode
Color (CAD) 2
Color (CAD) 3
Color (CAD) 4
Color (CAD) 5
Color (CAD) 6 Print
Quality
Fast
Standard *
High Input Res-
olution
600dpi *
300dpi Print
(Econo-
my)
Off *
On Paper
Manager Paper
Source
Automatic *
Roll 1 (Upper)
Roll 2 (Lower)
Cut Sheet Margin 3mm(Standard) *
5mm Conserve
Paper
Off *
On Auto Ro-
tate
Off *
On Nesting Use Nest-
ing
Off *
On
Nesting...

First Level
Second
Level Third Lev-
el Fourth
Level Fifth Level Sixth Level Seventh
Level Eighth Level GL2 Set-
tings Line &
Pen Man-
ager Pen Setup Define Pa-
lette Palette A (Select the
pen num-
ber)
Line At-
tributes
No Setting
Circle Setting
Palette B (Select the
pen num-
ber)(Indicates
Width,
Color, and
Line At-
tributes )(Specify the
values of
Width, Color,
and Line At-
tributes )
Factory (Select the
pen num-
ber)(Indicates 
Width, Color , and
Line Attributes ) Reset Pa-
lette
All Palette
Palette...

First Level
Second
Level Third Lev-
el Fourth
Level Fifth Level Sixth Level Seventh
Level Eighth Level Adjust
Printer Auto Band
Adj.
Advanced
Adj.
No
Yes Manual
Band Adj
No
Yes Adjust
Length
(*3
→P.728
) A:High No
Yes B:Stand-
ard/Draft
No
Yes Head Inc.
Adj.
No
Yes Interface
Setup
(*13
→P.729
) EOP Tim-
er
(*13
→P.729
) 10 sec.
30 sec.
1 min.
2 min.
5 min.
10 min. *
30 min.
60 min. TCP/IP
(*13
→P.729
) IP Mode
(*13
→P.729
) Automatic
Manual * Protocol
(*4
→P.729
)
(*13 →P.729
) DHCP
(*13
→P.729
) On
Off...

First Level
Second
Level Third Lev-
el Fourth
Level Fifth Level Sixth Level Seventh
Level Eighth Level Interface
Setup
(*13
→P.729
) NetWare
(*13
→P.729
) NetWare
(*13
→P.729
) On
Off * Frame
Type
(*6
→P.729
)
(*13 →P.729
) Auto Detect
Ethernet 2
Ethernet 802.2 *
Ethernet 802.3
Ethernet SNAP Print
Service
(*6
→P.729
)
(*13 →P.729
) BinderyPServer
RPrinter
NDSPServer *
NPrinter AppleTalk
(*13
→P.729
) On
Off * Ethernet
Driver
(*13
→P.729
) Auto De-
tect
(*13
→P.729
) On *
Off Comm.Mo
de
(*7
→P.729
)
(*13...