Canon Imageprograf Ipf825 User Guide

Back
a.
Carrying Handles
When carrying the printer, have six people hold it by these handles under both sides.
b.
Ethernet Port
Connect an Ethernet cable to this port. The lamp is lit if the Ethernet cable is connected correctly and communication is
possible between the computer and printer.
c.
USB Port
Connect a USB cable to this port. The printer is compatible with Hi-Speed USB connections.
d.
Manual Pocket
Store printer manuals in this pocket.
e.
Power Supply Connector
Connect the power cord to this...

Top Cover (Inside)
a.
Top Cover Roller
Prevents paper from rising when ejected.
b.
Paper Alignment Line
Align paper with this line when loading it.
c.
Carriage
Moves the Printhead. The carriage serves a key role in printing. 
 (See "Carriage.") →P.697
d.
Carriage Shaft
The Carriage slides along this shaft.
e.
Paper Retainer
Important in supplying the paper. This retainer holds paper as it is fed.
f.
Platen
The Printhead moves across the platen to print. Vacuum holes on the platen hold paper in...

h.
Cleaning Brush
When cleaning inside the printer under the Top Cover, use this brush to sweep away paper dust on the Platen.
Also use the brush to move the blue Switch on the Platen. i.
Cutter Rail
The Cutter Unit passes over this rail to cut paper.
j.
Cutter Unit
A round-bladed cutter for automatic paper cutting.
k.
Linear Scale
The  linear  scale  serves  a  key  role  in  detecting  the  Carriage  position.  Be  careful  not  to  touch  this  part  when  cleaning
inside the Top Cover or clearing...

Ink Tank Cover (Inside)
Note: The figure shows the printer as loaded with 700 ml (23.7 fl oz) Ink Tank.
a.
Ink Tanks
Cartridges of ink in various colors.
b.
Ink Tank Lock Lever
A lever that locks the Ink Tank in place and protects it. Lift and lower the lever when replacing an Ink Tank. To open
it,  lift  the  stopper  of  the  lever  until  it  stops,  and  then  push  it  down  toward  the  front.  To  close  it,  push  it  down  until  it
clicks into place. c.
Ink Lamp (Red)
Indicates the state of the...

Printer Parts > Printer parts >
iPF825
Ink Tank Cover (Inside) 9
699
 

Control Panel
Control Panel ................................................................................................................................................... 700
 
Turning the Printer On and Off ........................................................................................................................ 702
Printer Modes .................................................................................................................................................. 704...

c.
Data lamp (Green)
•
Flashing
During printing, the Data lamp flashes when the printer is receiving or processing print jobs. Otherwise, this lamp
flashes when the print job is paused or the printer is updating the firmware. •
Off
There are no active print jobs when the Data lamp is off.
d.
Message lamp (Orange)
•
On
A warning message is displayed.
•
Flashing
An error message is displayed.
•
Off
The printer is off or is operating normally.
e.
Paper Source Section
After you press the Feeder Selection...

k.
▲ Button
Offline: Press this button to rewind rolls manually.
 (See "Feeding Roll Paper Manually.") →P.650
Menu mode: Press this button to display the previous menu item or setting value. l.
▼ Button
Offline  mode:  Press  this  button  to  feed  the  roll  manually  in  the  direction  of  ejection,  as  needed. 
(See  "Feeding  Roll
Paper Manually .") →P.650
Menu mode: Press this button to display the next menu item or setting value. m.
▶ Button
Menu mode: Press this button to...

2.
The printer goes online in preparation for printing after startup, and the Online lamp and paper source section lamp
remain lit. The printer will not go online in the following situations. Take action as needed.
•
The Top Cover is open
Close the Top Cover.
•
The Ink Tank Cover is open
Close the Ink Tank Cover.
•
The Printhead is not installed
Please see "Replacing the Printhead
." →P.816
•
Ink Tank is not installed
Please see "Replacing Ink Tanks
." →P.799
•
ERROR is shown on the...

1.
Make sure no print jobs are in progress.
If 
the  Message  lamp  is  flashing,  check  the  message  on  the  Display  Screen  and  take  action  as  necessary.(See  " Error
Messages →P.886
.") If the Data lamp is flashing, the printer is receiving a print job. Turn off the printer only after printing is finished.
2.
Hold down the Power button for more than a second. After "Shut Down.. Please Wait..
" is shown on the Display Screen, the printer shuts off.Printer Modes
Printer modes...