Canon Imageprograf Ipf825 User Guide

Removing rolls from the Roll 1 (Upper) position
1. Press the Load/Eject button. 2.
Press ▲ or ▼ to select  Remove Roll, and then press the OK  button.
3. Press  ▲ or ▼ to select "Roll 1 (Upper)", and then press the  OK button.
The roll can now be removed.
4. Open the Top Cover and lift the Ejection Guide. 5.
Using both hands, rotate the Roll Holder in the direction of the arrow to rewind the roll. Handling Paper > Handling rolls >
iPF825
Removing the Roll from the Printer 7
645
 

6.
Remove the Roll Holder from the Roll Holder Slot. Note
• For instructions  on  removing  the  Roll  Holder  from  rolls,  see  "Removing  the  Roll  Holder  from
Rolls ." →P.649
7. Lower the Ejection Guide and close the Top Cover. Note
• To load new paper in the printer at this point,  see "Loading Rolls in the Printer." →P.634
Removing rolls from the Roll 2 (Lower) position
1. Press the Load/Eject button. Handling Paper 
> Handling rolls >
Removing the Roll from the Printer
iPF8257
646
 

2.
Press ▲ or ▼ to select  Remove Roll, and then press the  OK button.
3. Press  ▲ or ▼ to select "Roll 2 (Lower) ", and then press the OK button.
The roll can now be removed.
4. After confirming that the Online lamp is off, hold the Roll Unit Lever (a) and pull out the Roll Unit. 5.
Using both hands, rotate the Roll Holder in the direction of the arrow to rewind the roll. Handling Paper > Handling rolls >
iPF825
Removing the Roll from the Printer 7
647
 

6.
Remove the Roll Holder from the Roll Holder Slot. Note
• For instructions  on  removing  the  Roll  Holder  from  rolls,  see  "Removing  the  Roll  Holder  from
Rolls ." →P.649
• To load new paper in the printer at this point,  see "Loading Rolls in the Printer." →P.634
7. In a crouching position, push the Roll Unit in with both hands. Handling Paper 
> Handling rolls >
Removing the Roll from the Printer
iPF8257
648
 

Removing the Roll Holder from Rolls
1. Lift 
the Holder Stopper lever (a) from the shaft side to unlock it. Holding the Holder Stopper at the position indica-
ted (b), remove it from the Roll Holder. 2.
Remove the Roll Holder from the roll. 3.
When removing attachments, push the tips (a) in as you remove the attachment.
•3-Inch Paper Core Attachment #1 ( Roll Holder side) Handling Paper 
> Handling rolls >
iPF825
Removing the Roll Holder from Rolls 7
649
 

•
3-Inch Paper Core Attachment #2 ( Holder Stopper side) •
2-Inch Paper Core Attachment Important
• Store the roll in the original bag or box, away from high temperature, humidity, and direct sunlight. If paper
is  not  stored  properly,  the  printing  surface  may  become  scratched,  which  may  affect  the  printing  qualitywhen you use it again. Feeding Roll Paper Manually
When the printer is offline, you can advance or retract the roll on the Platen by pressing 
▲ or ▼.1.
Press the Online button to...

3.
Press the ▲ or ▼  button to advance or retract the roll.
Press ▲ to retract the roll manually.
Press ▼ to advance the roll manually. Note
• Holding down ▲ or ▼ for less than a second moves the roll about 1 mm (0.04 in).
Holding down  ▲ 
or ▼ for more than a second moves the roll until you release the button. Release the button
when the Display Screen indicates " End of paper feed. Cannot feed paper more.".Keeping Track of the Amount of Roll Paper Left
If you have activated automatic monitoring...

Specifying the Ink Drying Time for Rolls
When you are using paper that takes longer for ink to adhere, if the Cutter touches printed surfaces that are still wet, it may
damage the paper or cause rough cut edges. Also, ink may be transferred onto the paper surface during ejection, soiling it.
You can prevent problems by adjusting the drying time after printing before the paper is cut. Windows
1. Display the printer driver dialog box.
 (See "Accessing the Printer Driver Dialog Box from the Operating...

3.
In the  Paper  Detailed  Settings   dialog  box  displayed  next,  select  the  desired  settings  values  in  BBetween  Pages
and  CBetween Scans in  ADrying Time, and then click  OK.
 (See "Paper Detailed Settings Dialog Box (Windows) .") →P.225
Mac OS X
1. Choose Print in the application menu.
2. Select the  Main pane and click  CSettings in  AMedia Type . Handling Paper 
> Handling rolls >
iPF825
Specifying the Ink Drying Time for Rolls 7
653
 

3.
In the  Paper  Detailed  Settings   dialog  box  displayed  next,  select  the  desired  settings  values  in  CBetween  Pages
and  DBetween Scans in  BDrying Time, and then click  OK.
 (See "Paper Detailed Settings Dialog Box (Mac OS X) .") →P.444
Note
• By factory default,  Drying Time is deactivated (  Off ) for all paper types.
• To 

have the printer wait for ink to dry immediately after printing without releasing paper, set  Cutting Mode
to Eject in the printer menu.  (See...