Canon Imageprograf Ipf825 User Guide

Updating paper information
To update the paper information in the Paper Reference Guide and on the printer, download the latest version of the Media
Configuration Tool from the imagePROGRAF website. For information about the Media Configuration Tool, see  Media
Configuration Tool →P.412
 (Windows) or Media Configuration Tool →P.545
 (Macintosh).
The imagePROGRAF website is accessible from  imagePROGRAF Support Information.Important
• When you  use  the  Media  Configuration  Tool  to  update  information...

2.
Click Visit the imagePROGRAF webpage .The default browser on your computer is started and the imagePROGRAF webpage is displayed.
Paper Sizes
Rolls
Rolls that meet the following conditions are supported.
•Outer diameter: up to 150 mm (6 in.)
• Inner diameter of paper core: 2 or 3 inches
• Printing side out Roll Width
Roll Paper Width Settings in Printer Driver Borderless Printing ( *1 →P.626
)
1117.6 mm (44.00 in) 44-in. Roll (1117.6mm) No
1066.8 mm (42.00 in) 42-in. Roll (1066.8mm) Yes
1030.0 mm...

Sheets
Sheets of the following sizes are supported. Paper Sizes
Dimensions
ISO A0 841.0 × 1189.0 mm (33.11 × 46.81 in)
ISO A1 594.0 × 841.0 mm (23.39 × 33.11 in)
ISO A2 420.0 × 594.0 mm (16.54 × 23.39 in)
ISO A2+ 431.8 × 609.6 mm (17.00 × 24.00 in)
ISO A3 297.0 × 420.0 mm (11.69 × 16.54 in)
ISO A3+ 329.0 × 483.0 mm (12.95 × 19.02 in)
ISO A4 210.0 × 297.0 mm (8.27 × 11.69 in)
ISO B0 1000.0 × 1414.0 mm (39.37 × 55.67 in)
ISO B1 707.0 × 1000.0 mm (27.83 × 39.37 in)
ISO B2 500.0 × 707.0 mm (19.69 × 27.83...

Paper Sizes
Dimensions
DIN C2 458.0 × 648.0 mm (18.03 × 25.51 in)
DIN C3 324.0 × 458.0 mm (12.76 × 18.03 in)
DIN C4 229.0 × 324.0 mm (9.02 × 12.76 in)
20"x24" 508.0 × 609.6 mm (20.00 × 24.00 in)
18"x22" 457.2 × 558.8 mm (18.00 × 22.00 in)
14"x17" 355.6 × 431.8 mm (14.00 × 17.00 in)
12"x16" 304.8 × 406.4 mm (12.00 × 16.00 in)
10"x12" 254.0 × 304.8 mm (10.00 × 12.00 in)
10"x15" 254.0 × 381.0 mm (10.00 × 15.00 in)
8"x10" 203.2 × 254.0 mm (8.00 × 10.00...

Handling rolls
Attaching the Roll Holder to Rolls .................................................................................................................... 629
Loading Rolls in the Printer ............................................................................................................................. 634
 
Selecting the Paper Source ............................................................................................................................. 641
Selecting the Paper...

Important
• Cut the edge of the roll paper if it is uneven, dirty, or has tape residue. Otherwise, it may cause feeding prob-
lems and affect the printing quality. Be careful not to cut through any barcodes printed on the roll. •
Align the edges of the paper on both ends of the roll. This may cause feeding problems. Caution
• Set 
the roll on a table or other flat surface so that it does not roll or fall. Rolls are heavy, and dropping a roll
may cause injury. Note
• For 
details on supported sizes and...

1.
Lift the Holder Stopper lever (a) from the shaft side to unlock it. Holding the Holder Stopper at the position indica-
ted (b), remove it from the Roll Holder. 2.
When 
using a 3-inch paper core, align the tips (a) of 3-Inch Paper Core Attachment #1 with the holes (b) of the Roll
Holder and insert it firmly. Handling Paper 
> Handling rolls >
iPF825
Attaching the Roll Holder to Rolls 7
631
 

3.
With the  edge  of  the  roll  paper  facing  forward  as  shown,  insert  the  Roll  Holder  from  the  right  of  the  roll.  Insert  it
firmly until the roll touches the flange (a) of the Roll Holder. Important
• When 
loading  a  roll,  be  careful  to  avoid  hitting  the  printer  hard  with  the  roll.  This  may  damage  the
Roll Holder.
4. Insert the attachments for the roll paper core on the Holder Stopper.
Align the tips (a) of the attachment with the holes (b) of the Holder Stopper and...

•
2-Inch Paper Core Attachment 5.
Insert the  Holder  Stopper  from  the  left  in  the  Roll  Holder  as  shown.  Holding  it  at  the  position  shown  (b),  push  it
firmly in until the flange (a) of the Holder Stopper touches the roll. Lock the Holder Stopper lever (c) by pushing it
down toward the shaft side. Handling Paper 
> Handling rolls >
iPF825
Attaching the Roll Holder to Rolls 7
633
 

Loading Rolls in the Printer
Follow these steps to load rolls in the printer.
You can load rolls in two positions, in the Roll 1 (Upper) and Roll 2 (Lower) holders. Note
• Remove any loaded paper that will not be used.
• Rolls  (See "Removing the Roll from the Printer .") →P.644
• Sheets  (See "Removing Sheets .") →P.669
• If 
the Wheeled Output Stacker is installed, remove it in advance.   (See "Using the Wheeled Output Stack-
er.") →P.671
• If the Platen is dirty, clean inside...