Canon Imageprograf Ipf825 User Guide

Cutting Method
Menu SettingsDriver Setting
Man-
ual →P.656
 (See "Cutting Roll Paper After Printing
.")→P.198 Cutting
Mode Auto Cut
Manual No Yes
Print Cut
Guideline
Paper
Cut-
ting →P.658
Choose this option if you want to cut pages by
pressing Cutter Unit buttons for manual cutting
after printing when the printer driver is config-
ured to Auto Cut > No or Print Cut Guideline.
Otherwise choose this option if you want to cut
the roll edge after loading a roll. Paper
Cutting
Yes
No Print
Cut...

3.
Press ▲ or ▼ to select the type of paper, and then press the  ▶ button.
4. Press  ▲ or ▼ to select  Cutting Mode, and then press the  ▶ button.
5. Press ▲ or ▼ to select  Eject, and then press the  OK button.
6. Start printing.
Roll paper is fed to the specified cut position and then automatically stopped.
7. As 
you support the printed document to prevent it from dropping, hold down the  Stop button for at least a second to
cut the roll. Manual (when using media that cannot be cut using the Cutter...

2.
Press ▲ or ▼ to select  Paper Details, and then press the ▶ button.
3. Press  ▲ or ▼ to select the type of paper, and then press the  ▶ button.
4. Press ▲ or ▼  to select Cutting Mode, and then press the  ▶ button.
5. Press  ▲ or ▼ to select  Manual, and then press the OK  button.
6. Start printing.
The printer stops advancing the paper after printing.
7. Press the Online button. Roll paper is fed to the specified cut position and then automatically stopped.
8. Cut the roll paper manually with...

Paper Cutting (to have the roll cut at your specified position)
1.
After pressing the  Online button to bring the printer offline, press  ▲ or  ▼ to advance the roll paper to the position
for cutting. 2.
Press the Menu button to display  MAIN MENU.3.
Press ▲ or ▼  to select Paper Cutting, and then press the  ▶ button.
4. Press ▲ or ▼ to select  Yes, and then press the  OK button.
After the roll paper is cut, it is rewound automatically. Caution
• If 
paper  would  be  short  when  cut  at  a  particular...

Cutting the Leading Edge of Roll Paper Automatically
If the leading edge of a roll is crooked or warped, it may cause an error message or printing problems. In this case, set  Trim
Edge First to Automatic or On on the Control Panel to have the printer cut the leading edge to make the edge straight after
you load a roll.
Trim Edge First offers the following options. •
Automatic
If  the  left  and  right  side  of  the  leading  edge  of  the  roll  ((a)  and  (b))  are  uneven  by  40  mm  (1.6  in)  or...

2.
Press ▲ or ▼ to select  Paper Details, and then press the ▶ button.
3. Press  ▲ or ▼ to select the type of paper, and then press the  ▶ button.
4. Press ▲ or ▼  to select Trim Edge First , and then press the ▶ button.
5. Press  ▲ or ▼ to select the desired setting option, and then press the  OK button.
This setting takes effect the next time you load a roll. Reducing Dust from Cutting Rolls
The printer is equipped with a function to  reduce cutting dust for media such as Backlit Film that are more...

5.
Press ▲ or ▼ to select  On, and then press the OK button.
The function to reduce cutting dust is now activated. Roll Holder Set
Load a roll on the roll holder and then load the holder in the printer. The Roll Holder in the Roll Holder Set RH2-44 is for
use with both 2-inch and 3-inch paper cores. Use the correct attachment for the particular paper core.   (See "Attaching the
Roll Holder to Rolls .") →P.629
• Roll Holder Set RH2-44
•Roll Holder (for 2- and 3-inch paper cores) •
Attachments...

1.
When  ManageRemainRoll  in  the  printer  menu  is  set  to On,  the  roll  longer  than  the  length  of  a  single  page  of  the
print job is used.
When  ManageRemainRoll is set to  Off and both rolls are longer than the print job, the second condition determines
which roll is used. Note
• When 
the roll currently advanced is a type of paper that cannot be cut and the printed pages have not
been cut, the currently advanced roll is used.
• If both rolls are too short, an error message is displayed....

Handling sheets
Selecting the Paper Type (Sheet) ................................................................................................................... 663
 
Loading Sheets in the Printer .......................................................................................................................... 664
 
Manually Loading Paper to the Position for Printing ....................................................................................... 667
 
Removing Sheets...

5.
Press the Online  button to bring the printer online.Loading Sheets in the Printer
Note
• For details  on  supported  types  and  sizes  of  paper,  see  Paper  Sizes  or  the  Paper  Reference  Guide.    (See
"Paper Sizes .") →P.626
 (See "Types of Paper.") →P.623
• If 

the Platen is dirty, clean inside the Top Cover before loading paper.   (See "Cleaning Inside the Top Cov-
er.") →P.833
• After 

pressing  the  Load/Eject  button,  you  can  refer  to  instructions  on  the...