Canon Imageprograf Ipf825 User Guide

3.
Hold the Ink Tank by the handle (a) and remove it. Press the  OK button.Caution
• If there  is  still  ink  in  the  Ink  Tank  you  removed,  store  it  in  the  box  with  the  ink  holes  (a)  facing  up.
Otherwise, ink may leak and cause stains. Note
• Dispose of used ink tanks according to local regulations. Maintenance 
> Ink Tanks >
iPF825
Replacing Ink Tanks 11
805
 

Load the ink tank (330 ml)
1. Before opening the pouch, tilt the Ink Tank to the left and right gently seven or eight times. Important
• If you do not agitate the Ink Tank, the ink may sediment, which may affect printing quality.
2. Open the pouch and remove the Ink Tank. Important
• Never touch  the  ink  holes  or  electrical  contacts.  This  may  cause  stains,  damage  the  Ink  Tank,  and
affect printing quality.
• Do not remove and agitate ink tanks that have already been installed in the printer....

3.
Press the OK  button and insert the Ink Tank into the holder with the ink holes facing down, as shown. Note
• Ink tanks cannot be loaded in the holder if the color or orientation is incorrect.
If  the  Ink  Tank  does  not  fit  in  the  holder,  do  not  force  it  into  the  holder.  Make  sure  the  color  of  the
Ink  Tank  Lock  Lever  matches  the  color  of  the  Ink  Tank,  and  check  the  orientation  of  the  Ink  Tank before reloading it.
4. Lift the Ink Tank Lock Lever until it stops, and...

Note
• If the Ink Lamp is not lit in red, reload the tank.
6. Close the Ink Tank Cover. The printer will go online or offline.
Load the ink tank (700 ml)
1. Before 
opening the pouch, hold the new Ink Tank with both hands and tilt it to the left and right as shown, shaking
gently it seven or eight times. Important
• If you do not agitate the Ink Tank, the ink may sediment, which may affect printing quality.
Maintenance 
> Ink Tanks >
Replacing Ink Tanks
iPF82511
808
 

2.
Open the pouch and remove the Ink Tank. Important
• Never touch  the  ink  holes  or  electrical  contacts.  This  may  cause  stains,  damage  the  Ink  Tank,  and
affect printing quality.
• Do not remove and agitate ink tanks that have already been installed in the printer. Ink may leak out.
3. Press the OK  button and insert the Ink Tank into the holder with the ink holes facing down, as shown. Note
• Ink tanks cannot be loaded in the holder if the color or orientation is incorrect.
If 
 the  Ink...

4.
Lift the Ink Tank Lock Lever until it stops, and then push it down until it clicks into place. 5.
Make sure the Ink Lamp is lit in red. Note
• If the Ink Lamp is not lit in red, reload the tank.
6. Close the Ink Tank Cover. The printer will go online or offline.
Maintenance > Ink Tanks >
Replacing Ink Tanks
iPF82511
810
 

Checking Ink Tank Levels
On the Display Screen, you can check how much ink is left in the Ink Tank.
The Display Screen indicates the remaining ink levels, unless an error message is displayed. During error messages, press the 
Information button to view the ink levels on the Display Screen.These levels shown on the Display Screen correspond to the inks identified by the Color Label on the bottom of the Display
Screen.
These symbols may be displayed above the ink level: 
! if ink is low, × if no ink is...

If a message for checking the ink is shown on the Display Screen
When there is little ink left, the Message lamp is lit and " Ink Level: Check" is shown on the Display Screen. You can
continue to print, but prepare to replace the Ink Tank.  (See "Checking Ink Tank Levels.") →P.811
Before print jobs and maintenance that consume a lot of ink
If little ink is left, there may not be enough for large-format printing, head cleaning, and maintenance, which require a lot of
ink. In this case,...

Printheads
Printhead ......................................................................................................................................................... 813
 
Checking for Nozzle Clogging ......................................................................................................................... 813
Cleaning the Printhead .................................................................................................................................... 815
Replacing the...

2.
Press the Menu button to display  MAIN MENU.3.
Press ▲ or ▼  to select Test Print , and then press the ▶ button.
4. Press  ▲ or ▼ to select  Nozzle Check, and then press the ▶ button.
5. Press ▲ or ▼  to select Yes, and then press the  OK button.
The printer goes online and prints a test pattern.
6. Check the printing results.
The 
Printhead  L  prints  the  test  pattern  for  nozzle  checking  on  the  top  line  in  each  color,  and  the  Printhead  R  prints
the test pattern on the bottom line....