Canon Imageprograf Ipf825 User Guide

Error Message
Error Messages
886Messages regarding paper
888Messages regarding ink
900Messages regarding printing or adjustment
903Messages regarding printheads
905Messages regarding the maintenance cartridge
908Messages regarding the hard disk
910Messages regarding HP-GL/2
912Other Messages
913 Error Message >
iPF825 13
885
 

Error Messages
Before borderless printing, move the blue platen switch. ................................................................................904
Blue platen switch is dirty. ............................................................................................................................... 904
Borderless printng not possible. ...................................................................................................................... 898
Borderless printng not possible....

Regular printing is selected, but a roll is loaded. 
............................................................................................ 895
Rel lever is in wrong position. .......................................................................................................................... 898
Remaining level of the ink cannot be correctly detected. ................................................................................900
Roll feed unit error....

Messages regarding paper
Papr Type Mismatch ....................................................................................................................................... 888
PaprTypeMismatch ......................................................................................................................................... 888
The paper is too small. .................................................................................................................................... 889...

Cause
Corrective Action
When the  Detect Mismatch menu is
set to Pause, the type of paper loaded
does not match the type specified in
the printer driver. 2.
Either change  the  type  of  paper  specified  in  the  printer  driver  settings  or
replace the loaded paper and change the paper type setting on the printer. (See "Loading and Printing on Rolls .") →P.3
 (See "Loading and Printing on Sheets .") →P.8
You tried to print a test pattern for
printer adjustment on several sheets,
but...

RollWdthMismatch
Cause
Corrective ActionThe roll width set in 
Fit Roll Paper Width  in the
printer driver does not match the width of the roll loa-
ded in the printer. Press the Online button to resume printing.
However, note that this error may cause paper jams and af-
fect the printing quality.
Hold down the Stop button for a second or more to cancel
printing.
Make sure the roll width selected in the dialog box displayed
when you select  Fit Roll Paper Width in the printer driver
matches the width of...

Cause
Corrective ActionPaper has been loaded askew, or warped paper has been loaded.
6.
If "Not  finished  printing.  Finish  printing
remaining  jobs?"  is  shown  on  the  DisplayScreen, press the  OK button.
Printing  will  resume,  starting  from  the  page
on which the error occurred.
 (See "Loading Sheets in the Printer .") →P.664
Because the Platen is soiled with ink or other substances, the size
of the clear film cannot be detected. Open the Top Cover and clean the entire Platen....

This paper cannot be used.
Cause
Corrective Action
Paper that is too large for the printer has been
loaded. Lift the Release Lever and load paper of the correct size.
 (See "Paper Sizes .") →P.626
Paper that is too small for the printer has been
loaded. Lift the Release Lever and load paper of the correct size.
 (See "Paper Sizes .") →P.626
Paper has been loaded that is too small to print
the test pattern for printhead adjustment or noz-
zle checking. Lift the Release Lever and load...

Roll x is selected. (x is 1 (Upper) or 2 (Lower))
Cause
Corrective ActionThe indicated roll is specified for a print job sent from a
computer, but that roll is not loaded.
Load the indicated roll and try printing again.
To print on a sheet instead, hold down the  Stop button for
more than a second to cancel printing, load a sheet, and then
print.  (See "Loading and Printing on Sheets .") →P.8
Roll x is empty. (x is 1 (Upper) or 2 (Lower))
"Lift the release lever and replace the roll....

"Press OK."
Cause
Corrective Action
The roll is empty. Follow these steps to replace the used roll with a new roll of the
same type and size.
1. Press the OK button and remove the roll.
 (See "Removing the Roll from the Printer .") →P.644
 (See " Removing the Roll Holder from Rolls .") →P.649
2. Load the new roll.
 (See "Attaching the Roll Holder to Rolls .") →P.629
 (See "Loading Rolls in the Printer .") →P.634
3. If no barcode was printed on the roll, specify the...