Canon Imageprograf Ipf825 User Guide

Sheet printing is selected.
Cause
Corrective ActionYou have attempted to print a test print sheet or other printer
status information on a sheet, but no sheet is loaded. Load a sheet and try printing again.
To print on a roll instead, hold down the  Stop button
for more than a second to cancel printing, load a roll,
and then print.
 (See " Loading and Printing on Rolls .") →P.3
Regular printing is selected, but a roll is loaded.
Cause
Corrective Action
A print job for printing on
sheets was sent...

Roll x jam (x is 1 (Upper) or 2 (Lower))
"Lift the release lever."
Cause
Corrective Action
A paper jam occurred
in the printer during
printing. 1.
Lift the Release Lever and remove the jammed paper.
 (See "Clearing Jammed Roll Paper .") →P.847
 (See "Clearing a Jammed Sheet .") →P.851
2. If 
"Not  finished  printing.  Finish  printing  remaining  jobs? "  is  shown  on  the  Display
Screen, press the OK button.
Printing will resume, starting from the page on which the...

Cause
Corrective ActionPaper is loaded askew.
5.
Close the Top Cover.
 (See "Loading Sheets in the Printer .") →P.664
Note
• To disable  this  message  (if  it  is  displayed  repeatedly  despite  reloading  paper,  for  example),  choose  Off  or
Loose in the  Skew Check Lv. setting of the printer menu. However, this may cause jams because paper may
be askew when it is printed. Also, the Platen may become soiled, which may soil the back of the next docu-
ment when it is printed. Paper cutting...

Cause
Corrective Action
The Cutter Unit stops in
the middle of cutting.  (See "Specifying the Cutting Method for Rolls
.") →P.654
In other cases, the Cutter
Unit may be damaged. Contact your Canon dealer for assistance.End of paper feed.
Cause
Corrective Action
You are pressing the ▲  button on the Control Panel and trying to rewind the roll to the edge. Release the ▲ button. Rel lever is in wrong position.
Cause
Corrective ActionThe Release Lever is up. Lower the Release Lever.
If the error...

Cause
Corrective ActionThe print job received specifies a type
or width of paper that is not compatible
with borderless printing.
 (See "Types of Paper
.") →P.623
If you press the Online button and continue printing, the document will be
printed with a border. The loaded paper is not compatible with
borderless printing.
Hold down the Stop button for a second or more to cancel printing.
If you press the Online button and continue printing, the document will be
printed with a border. Roll feed unit...

Messages regarding ink
Ink insufficient. ................................................................................................................................................. 900
No ink left. ....................................................................................................................................................... 900
Remaining level of the ink cannot be correctly detected. ................................................................................900
 
Close...

Close Ink Tank Cover
Cause
Corrective Action
The Ink Tank Cover is open. Close the Ink Tank Cover.
Ink tank is empty.
Cause
Corrective Action
There is no ink left in an ink tank. Open the Ink Tank Cover and replace the Ink Tank for which the Ink Lamp
is flashing.
 (See "Replacing Ink Tanks .") →P.799
Not much ink is left.
Cause
Corrective Action
Not much ink is left. Prepare a new Ink Tank.
We recommend replacing the Ink Tank with a new Ink Tank at this point if
you plan to print large-format or...

No ink tank loaded.
Cause
Corrective Action
There is no Ink Tank of the indicated color in the printer. Load or reload the Ink Tank.
 (See "Replacing Ink Tanks .") →P.799
There is a problem with the Ink Tank. Replace it with a new Ink Tank.
 (See "Replacing Ink Tanks .") →P.799
Wrong ink tank.
Cause
Corrective Action
The Ink Tank in the printer is incompatible. Load an Ink Tank specified for use with the printer.  (See "Replacing Ink Tanks.") →P.799Error Message > Messages...

Messages regarding printing or adjustment
Use another paper. .......................................................................................................................................... 903
Cannot print as specified. ................................................................................................................................ 903
 
 
Borderless printng not possible. Paper stretched or shrank. ........................................................................... 903...

Before borderless printing, move the blue platen switch.
Cause
Corrective Action
The blue Switch on the platen was set to the side
opposite ● when a borderless print job was re-
ceived. Before borderless printing, set the blue Switch on the platen to
the ● side.
 (See "Setting the Blue Switch on the Platen .") →P.867
Blue platen switch is dirty.
Cause
Corrective Action
The blue Switch on the platen is dirty. Open the Top Cover and clean the blue Switch on the platen.  (See "Cleaning Inside...