Home > Canon > Printer > Canon Imageclass Mf4880dw User Guide

Canon Imageclass Mf4880dw User Guide

Here you can view all the pages of manual Canon Imageclass Mf4880dw User Guide. The Canon manuals for Printer are available online for free. You can easily download all the documents as PDF.

Page 21

21
Basic Operation 4 Neatly place the documents face up.• 
Place the document under the load limit guides (A).
• Make sure that the paper stack does not exceed the load limit marks (B).
 
#
5 Align the document guides tightly to the width of the document.
 
IMPORTANTIMPORTANT
If the document guides are too loose or too tight, this may result in 
misfeeds or paper jams.
IMPORTANTIMPORTANT
• While scanning documents, do not add or remove documents.
• When scanning is complete, remove the document from the...

Page 22

22
 
 Load  Paper
Before loading paper, check the paper is the right type. If you load inappropriate paper 
repeatedly, this may cause paper jams.
1Step Check if the type of paper is appropriate. 
Paper such as Legal, Letter, Statement, Executive, and envelopes can be used. For details 
about the available paper or precautions, see [Basic Operation]  [Loading paper ] in 
the e-Manual.
 To prevent paper jams, do not use any of the following:
• Wrinkled or creased paper
• Curled or rolled paper
• To r n...

Page 23

23
Basic Operation Loading Paper in the Paper Cassette 
This section describes how to load letter paper in the Paper Cassette. When loading 
envelopes or paper with a letterhead, see ”Loading Envelopes or Paper with a Letterhead” 
(
→p.25).
1 Lift the dust cover.
 
2 Spread the paper guides a little wider than the paper size.
 
3 Gently load the paper into the paper cassette with the print side face up, 
until the edge of the paper stack me ets the back of the paper cassette.
• 
Make sure that the paper...

Page 24

24
5 Close the dust cover.
6 Specify the loaded paper size and type (→p.25).
 Loading Paper in the Multi-Purpose Tray
1 Spread the paper guides a little wider than the paper.
 
2 Gently load the paper into the paper cassette with the print side face up, 
and adjust the paper guides tightly to the width of the paper.
 
IMPORTANTIMPORTANT
If the paper guides are too loose or too tight, this may result in misfeeds 
or paper jams.
3 Specify the loaded paper size and type (→p.26).
 

Page 25

25
Basic Operation  Loading Envelopes or Paper with a Letterhead  
This section describes how to load envelopes and paper with a letterhead.
Envelopes
 
Loading Orientation
Load the paper properly by following the instructions below. 
#$
#$
1-sided printing
Load the paper with the printed 
side face up.2-sided printing 
(MF4890dw/MF4880dw only)
Load the paper with the printed 
side face down.
When printing with 
portrait layout
When printing with 
landscape layout When printing with 
portrait layoutWhen...

Page 26

26
 Setting a Paper Size and Type 
Make sure that the Paper Settings match the size and the type of the loaded paper.
1 Press [  ] (Paper Settings).
2 Press [▲] or [▼] to highlight  or , and then press 
[OK].
3 Press [▲] or [▼] to highlight the desired paper size, and then press [OK].
• 
To specify the paper size manually, select < Custom Size>, and then refer to 
“Specify a Paper Size Manually” at the bottom of this page to specify the size.
 
Paper Size
 LTR
 LGL
 STMT
 EXEC
4 Press [▲] or [▼] to...

Page 27

27
Basic Operation Switch to the Quiet Mode
You can switch to and cancel the Quiet mode, by pressing [  ] (Quiet Mode).
• By default, the Quiet mode is set to . To change this setting to < On>,  
and specify the time to switch to the Quiet mode automatically, press 
[ 
 ] (Menu)     ,  
and then specify a time. 
• When the Quiet mode is On, the processing speed of functions becomes 
slower.
• The Quiet mode cannot be used with some paper sizes or types.
• The Special mode has higher priority than the...

Page 28

28
Use the Toner Saver Mode
You can set whether or not to conserve toner when copying or faxing. When using the 
Toner Saver mode, the output may not be clear, as subtle details, such as thin lines and light 
colors, may not be clearly reproduced.
1 Press [  ] (Menu).
2 Press [▲] or [▼] to highlight , and then press [OK].
3 Press [▲] or [▼] to highlight , and then press [OK].
 
Preferences
 Sound Volume Control
 Display Settings
 Toner Saver Mode
 Paper Feed Method Sw
...
4 Press [▲] or [▼] to highlight...

Page 29

29
Make a Basic Copy  ………………………………………………\
…… 30
Copy by Saving Paper ………………………………………………\
… 31
Enlarge or Reduce Copies  …………………………………………… 31
Adjust the Image Quality for Copy …………………………………… 32Adjusting the density  ………………………………………………\
 32
Se lec

ting the Document Type  ……………………………………… 32
Adjusting the sharpness  …………………………………………… 33
Make Double-Sided Copies (MF4890dw/MF4880dw Only)  ………… 34
C o

py Multiple Pages onto One Sheet  ……………………………… 35
Collate Copies ………………………………………………\
………… 35
Copy a...

Page 30

30
Make a Basic Copy 
1 Place your documents (→p.19).
 
IMPORTANTIMPORTANTIf the document guides are too loose or too tight, this may result in 
misfeeds or paper jams.
2 Switch to the Copy mode (→p.16).
3 Enter the desired copy quantity (1 to 99) with the alphanumeric keys.• 
Press [  ] (Clear) to delete the entered copy quantity.
 
Copy: Press Start
100%      LTR
 Density:  0
 Original Type: Text
. ..
 2-Sided: Off
1
+
-
01
4 Press [  ] (Start). 
 
Canceling Copy Jobs 
Press [  ] (Stop) twice.
*  It is...
Start reading Canon Imageclass Mf4880dw User Guide

Related Manuals for Canon Imageclass Mf4880dw User Guide

All Canon manuals