Canon Eos Rebel T5i 700d Instruction Manual

251
Q Quick Control During Playback
To rotate an image, set [ 51: Auto rotate ] to [OnzD]. If [ 51: Auto rotate ] 
is set to [ OnD] or [ Off], the [ b Rotate image ] setting will be recorded to 
the image, but the camera will not rotate the image for display.
  Pressing the < Q> button during the index display will switch to the 
single-image display and the Quick Control screen will appear. Pressing 
the < Q> button again will return to the index display.
  For images taken with another camera,  the...

252
You can play back movies in the following three ways:Use the stereo AV cable AVC-DC400ST 
(sold separately) or HDMI cable HTC-
100 (sold separately) to connect the 
camera to a TV set. Then you can play 
back captured movies and still photos on 
the TV.
If you have a High-Definition TV set and 
connect your camera with an HDMI 
cable, you can watch Full High-Definition 
(Full HD: 1920x1080) and High-
Definition (HD: 1280x720) movies with 
higher image quality.
You can play back movies on the...

253
k Enjoying Movies
The movie files recorded on the card can 
be transferred to a personal computer 
and played with ImageBrowser EX 
(provided software).
Playback and Editing with a Personal Computer(p.364)
 To have the movie play back smoothly on a personal computer, use a 
high-performance personal computer. Regarding the computer hardware 
requirements for ImageBrowser EX, refer to the PDF file ImageBrowser 
EX User Guide.
  If you want to use commercially-availa ble software to play back or edit...

254
1Play back the image.
 Press the < x> button to display 
images.
2Select a movie.
 Press the < U > key to select a movie. On the single-image display, the 
 icon displayed on the 
upper left indicates a movie. If the 
movie is a video snapshot, < > 
will be displayed.
  You can press the < B> button to 
switch to the shooting information 
display (p.271).
 
In the index display, perforations at the 
left edge of a thumbnail indicate a 
movie. 
As movies cannot be played 
on the index display, press...

255
k Playing Movies
Movie Playback Panel
* When background music is set, the movie’s sound will not be played.
Ta p  [7] at the center of the screen.
XThe movie will start playing.
  To display the movie playback panel, 
tap < s1 > on the upper left of the 
screen.
  To pause the movie while it is playing, 
tap the screen. The movie playback 
panel will also appear.
OperationPlayback Description
7 PlayPressing < 0> toggles between play and stop.
8 Slow motionAdjust the slow motion speed by pressing the...

256
You can edit out the first and last scenes of a movie (except video snapshots) in 1-sec. increments.
1On the movie playback screen, 
select [X].
X The editing screen wi ll be displayed.
2Specify the part to be edited out.
 Select either [ U] (Cut beginning) or 
[V ] (Cut end), then press < 0>.
  Press the < U> key to see the 
previous or next frames. Holding it 
down will fast forward the frames.
  After deciding which part to edit out, 
press < 0>. The portion highlighted 
in blue on the top of the...

257
X Editing a Movie’s First and Last Scenes
4Save the edited movie.
  Select [ W], then press < 0>.
X The save screen will appear.
  To save it as a new movie, select 
[New file ]. To save it and overwrite 
the original movie file, select 
[Overwrite ]. Then press < 0>.
  On the confirmation screen, select 
[OK ], then press < 0> to save the 
edited movie and return to the movie 
playback screen.
  Since the editing is performed in ap prox. 1-sec. increments (position 
indicated by [ ]), the exact...

258
You can play back the images on the card as an automatic slide show.
1Select [Slide show].
 Under the [x 2] tab, select [Slide 
show ], then press < 0>.
2Select the images to be played.
  Press the < V> key to select the 
desired option, then press < 0>.
[All images/Movies/Stills]
  Press the < V> key to select one of 
the following: [ jAll images/
k Movies/z Stills]. Then press 
< 0 >.
[Date/Folder/Rating]
  Press the < V> key to select one of 
the following: [ iDate/
nFolder/
9 Rating ].
  When <...

259
3 Slide Show (Auto Playback)
3Set [Set up] as desired.
 Press the < V> key to select [ Set 
up ], then press < 0>.
  Set the [Display time], [ Repeat], 
[Transition effect ], and 
[Background music ] for the still 
photos.
  The background music selection 
procedure is explained on page 261.
  After selecting the settings, press the 
 button.
ItemPlayback Description
jAll imagesAll the still photos and movies  on the card will be played back.
iDateStill photos and movies taken on the selected...

260
3 Slide Show (Auto Playback)
4Start the slide show.
 Press the < V> key to select [ Start], 
then press < 0>.
X After [ Loading image... ] is displayed, 
the slide show will start.
5Quit the slide show.
  To quit the slide show and return to 
the setting screen, press the < M> 
button.
[Transition effect][Background music ]
 To pause the slide show, press < 0>. During pause, [ G] will be 
displayed on the upper left of the image. Press < 0> again to resume 
the slide show. You can also pause  the...