Canon Eos Rebel T5i 700d Instruction Manual

211
Handy Features
Text Entry Procedure Changing the entry area:
Press the < Q> button to toggle 
between the top and bottom entry 
areas.
  Moving the cursor:
Press the < U> key to move the 
cursor.
  Entering text:
In the bottom area, press the < S> key or turn the < 6> dial to 
select a character, then press < 0> to enter it.
  Changing the entry mode:*
Select [ ] at the bottom right of the bottom entry area. Each 
time you press < 0>, the entry mode will change as follows: Lower 
case  → Numerals /...

212
Handy Features
Vertical images are rotated automatically so they 
are displayed vertically on the camera’s LCD 
monitor and on the personal computer instead of 
horizontally. You can change the setting for this 
feature.Under the [ 51] tab, select [ Auto rotate], 
then press < 0>. The available settings 
are described below. Select the option, 
then press < 0>.
  [On zD]: 
The vertical image is automatically rotated during playback 
on both the camera’s LCD monitor and on the computer.
  [On D] : The...

213
Handy Features
While the shooting settings (p.50) are displayed, press the  
button to display the camera’s major function settings.
B  Checking Camera Settings
Date/Time (p.36) WB correction (p.139)/
WB bracketing (p.140) Color space (p.141)
Auto rotate display (p.212)
Auto power off (p.205) Card remaining capacity
Settings display
Red-eye reduction (p.108)
Beeper (p.204)
Sensor cleaning (p.223) Touch control (p.55)
Live View shooting (p.145)
LCD auto off (p.217)
Daylight saving time (p.37)
COPY  

214
Handy Features
The camera’s shooting settings and menu settings can be reverted to 
their defaults. This option is available in Creative Zone modes.
1Select [Clear settings].
 Under the [5 4] tab, select [ Clear 
settings ], then press < 0>.
2Select [Clear all camera settings].
  Select [ Clear all camera settings ], 
then press < 0>.
3Select [OK].
  Select [ OK], then press < 0>.
X Setting [ Clear all camera settings ] 
will reset the camera to the default 
settings as shown on the next page....

215
Handy Features
Shooting SettingsCamera Settings
AF operationOne-Shot AFAuto power off30 sec.AF point selectionAutomatic selectionBeepEnableDrive mode
u (Single shooting)Release shutter 
without cardEnableMetering modeq
 (Evaluative metering)ISO speedAUTO (Auto)Image review2 sec.ISO Auto Maximum 6400Histogram displayBrightnessExposure 
compensation/AEBCanceledImage jump with 6e (10 images)Auto rotateOn z DBuilt-in flash settings Normal firingLCD brightnessFlash exposure 
compensation0 (Zero)LCD auto...

216
Handy Features
Live View ShootingMovie Shooting
Live View shootingEnableAF methodu+TrackingAF methodu+TrackingMovie Servo AFEnableContinuous AF EnableAF with shutter 
button during kONE SHOTTouch ShutterDisableGrid displayOffAspect ratio
3:2Grid display OffMetering timer16 sec.Metering timer16 sec.Movie recording size1920x1080Sound recordingAutoVideo snapshotDisable
COPY  

217
Handy Features
You can prevent the display-off sensor from turning off the shooting 
setting display on the LCD monitor when your eye approaches the 
viewfinder.Under the [52] tab, select [ LCD auto 
off ], then press < 0>. Select [ Disable], 
then press < 0>.
You can change the background color  of the shooting settings screen.
Under the [5 3] tab, select [ Screen 
color ], then press < 0>. Select the 
desired color, then press < 0>.
When you exit the menu, the selected 
color will be displayed for...

218
The built-in flash and external Speedlite settings can be set with the 
camera’s menu. You can use the camera’s menu to set the external 
Speedlite function settings only if an EX-series Speedlite compatible 
with this function is attached.
The setting procedure is the same as when setting a camera menu 
function.
Select [Flash control].
  Under the [z 1] tab, select [Flash 
control ], then press < 0>.
X The flash control screen will appear.
  Normally, set this to [Enable ].
  If [Disable] is set,...

219
3 Setting the Flash N
You can set the flash-sync speed for 
flash photography in the aperture-priority 
AE (f) mode.
  : Auto
The flash sync speed is set automatically within a range of 1/200 
sec. to 30 sec. to suit the sc ene’s brightness. High-speed sync is 
also possible.
  : 1/200-1/60 sec. auto
Prevents a slow shutter speed from  being set in low-light conditions. 
It is effective for preventing subject blur and camera shake. 
However, while the subject will  be properly exposed with the flash,...

220
3 Setting the Flash N
You can set the functions in the table below. The functions displayed under 
[
External flash func. setting] will vary depending on the Speedlite model.
 Select [ Built-in flash settings] or 
[External flash func. setting ].
X The flash functions will be displayed. 
With [ Built-in flash settings ], the 
highlighted functions can be selected 
and set.
[Built-in flash settings] and [External flash func. settings] Functions
*For [ FEB] (Flash exposure bracketing) and [ Zoom],...