Canon Eos Rebel T5i 700d Instruction Manual

201
Movie Shooting Cautions
Recording
 If you use a card with a slow  writing speed, a five-level 
indicator may appear on the right of the screen during movie 
shooting. It indicates how much data has not yet been 
written to the card (remaining capacity of the internal buffer 
memory). The slower the card, the faster the indicator will 
climb upward. If the indicator becomes full, movie shooting 
will stop automatically.
If the card has a fast writing speed, the indicator will either 
not appear or the...

202
Cautions when [Movie servo AF] is set to [Enable]
Shooting Conditions that Make Focusing Difficult
 A fast-moving subject approaching or  moving away from the camera.
  A subject moving at a close distance in front of the camera.
  Also refer to “Shooting conditions that make focusing difficult” on page 
165.
• Since using Movie Servo AF will cons ume battery power, the number of 
possible shots and the possible movie shooting time will be reduced.
• During zooming or image magnification, Movie Servo...

203
7
Handy Features
 Disabling the Beeper (p.204)
  Card Reminder (p.204)
  Setting the Image Review Time (p.204)
  Setting the Auto Power-off Time (p.205)
  Adjusting the LCD Monitor Brightness (p.205)
  Creating and Selecting a Folder (p.206)
  File Numbering Methods (p.208)
  Setting Copyright Information (p.210)
  Auto Rotation of Vertical Images (p.212)
  Checking Camera Settings (p.213)
  Reverting the Camera to the Default Settings (p.214)
  Preventing the LCD Monitor from Turning Off...

204
You can prevent the beeper from sounding when focus is achieved, 
during self-timer operation, and during touch screen operations.Under the [z1] tab, select [Beep ], then 
press < 0>. Select [ Disable], then 
press < 0>.
To silence the beeper only during touch 
screen operations, select [ Touch to ].
This setting prevents shooting if there is no card in the camera. Under the [z1] tab, select [Release 
shutter without card ], then press 
< 0 >. Select [ Disable], then press 
< 0 >.
If there is no card...

205
Handy Features
To save battery power, the camera turns off automatically after the set 
time of idle operation elapses. You can set this auto power-off time. 
When the camera has turned off due to auto power off, you can turn it 
on again by pressing the shutter button halfway or pressing any of the 
following buttons: < M>, , , < A>, etc.
If [Disable] is set, either turn off the camera or press the < B> 
button to turn off the LCD monitor to save battery power.
Even when [Disable] is set, if the...

206
Handy Features
You can freely create and select the folder where the captured images 
are to be saved.
This operation is optional since a folder will be created automatically for 
saving captured images.
Creating a Folder
1Select [Select folder].
 Under the [5 1] tab, select [ Select 
folder ], then press < 0>.
2Select [Create folder].
  Select [ Create folder ], then press 
< 0 >.
3Create a new folder.
  Select [ OK], then press < 0>.
X A new folder with the folder number 
increased by one is...

207
Handy Features
Selecting a Folder With the folder selection screen 
displayed, select a folder and press 
.
X The folder where the captured 
images will be saved is selected.
  Subsequent captured images will be 
recorded into the selected folder.
Number of images
in folder
Folder name
Lowest file number
Highest file number
About FoldersAs with “ 100CANON” for example, the folder name starts with three digits 
(folder number) followed by five alphanumeric characters. A folder can 
contain up to 9999...

208
Handy Features
The image files will be numbered from 0001 to 9999 in the order the 
images are taken, then saved in a folder. You can change how the file 
number is assigned.
The file number will appear on your computer in this format: 
IMG_0001.JPG.Under the [51] tab, select [ File 
numbering], then press < 0>. The 
available settings are described below. 
Select the option, then press < 0>.
  [Continuous]: The file numbering continues in sequence even 
after you replace the card or create a...

209
Handy Features
 [Auto reset]: The file numbering restarts from 0001 each time 
the card is replaced or a new folder is created.
When you replace the card or cr eate a folder, the file numbering 
restarts from 0001 for the new images  saved. This is convenient if 
you want to organize images according to cards or folders.
However, if the replacement card or  existing folder already contains 
images recorded previously, the file numbering of the new images 
may continue from the file numbering of the...

210
Handy Features
When you set the copyright information, it will be appended to the 
image as Exif information.
1Select [Copyright information].
 Under the [ 54] tab, select [ Copyright 
information ], then press < 0>.
2Select the option to be set.
  Select [ Enter author’s name ] or 
[Enter copyright details], then press 
< 0 >.
X The text entry screen will appear.
  Select [ Display copyright info. ] to 
check the copyright information 
currently set.
  Select [ Delete copyright 
information ] to...