Canon Eos Rebel T5i 700d Instruction Manual

151
Function settings particular to Live View shooting are explained here.
If you press the  button while the image is displayed on the LCD 
monitor in a Creative Zone mode, you can set any of the following:  AF 
method , drive mode , metering mode,  image-recording quality , built-
in flash settings, white balance, Pictur e Style, Auto Lighting Optimizer, 
and Creative filters .
In Basic Zone modes, you can set t he functions in bold and the settings 
shown in the table on page 76.
1Press the  button.
X...

152
While looking at the Live View screen, you can shoot while applying a 
filter effect (Grainy B/W, Soft focus, Fish-eye effect, Art bold effect, 
Water painting effect, Toy camera effect, and Miniature effect). These 
are called Creative filters.
When you shoot with a Creative filter applied, only images applied with 
a Creative filter will be saved. If you also want to save the image without 
a Creative filter, shoot the image without the Creative filter and apply 
the Creative filter afterward, then...

153
U Using Creative Filters
5Adjust the Creative filter’s effect.
  Press the < B> button (except for 
the Miniature effect).
  Press the < U> key to adjust the 
Creative filter’s effect, then press 
< 0 >.
  For the Miniature effect, press , 
then press the < V> key to move the 
white frame to where you want it to 
look sharp.
6Take the picture.
X The picture will be applied with the 
Creative filter.
Even if you set the drive mode to < i> or the self-timer to < q>, single 
shooting will take effect....

154
U Using Creative Filters
  Grainy B/W
Makes the image grainy and black and white. By adjusting the 
contrast, you can change the black-and-white effect.
  Soft focus
Gives the image a soft look. By adjusting the blur, you can change 
the degree of softness.
  Fish-eye effect
Gives the effect of a fish-eye lens. The image will have a barrel-type 
distortion.
Depending on the level of this filter effect, the amount trimmed along 
the image periphery will change. Also , since this filter effect...

155
U Using Creative Filters
  Toy camera effect
Gives a color cast typical of toy cameras and darkens the image’s 
four corners. By adjusting the color tone, you can change the color 
cast.
  Miniature effect
Creates a diorama effect. You can change where the image is to 
look sharp. In step 5, you can press the < u> button (or tap [ ] on 
the screen) to change the white frame’s orientation (horizontal/
vertical) where you want the image to look sharp. The AF method 
will be FlexiZone - Single with the...

156
The menu options below are displayed.
The functions settable on this menu 
screen only apply during Live View 
shooting. These functions do not take 
effect during viewfinder shooting.
 Live View shooting
You can set Live View shooting to [ Enable] or [Disable].
  AF method
You can select [ u+Tracking ] (p.159), [FlexiZone - Multi ] (p.161), 
[FlexiZone - Single ] (p.162), or [Quick mode ] (p.166).
  Continuous AF
The default setting is [ Enable].
Since the focus is constantly cl ose to the subject,...

157
A Menu Function Settings
 Aspect ratioN
The image’s aspect ratio can be set to [ 3:2], [4:3 ], [16:9 ], or [1:1 ]. 
The area surrounding the Live View image is masked in black when 
the following aspect ratios are set: [ 4:3] [16:9 ] [1:1].
JPEG images will be saved wi th the set aspect ratio. 1 images 
will always be saved with the [ 3:2] aspect ratio. Since the aspect 
ratio information is appended to the  1 image, the image will be 
generated in the respective aspect ratio when you process the  1...

158
A Menu Function Settings
 Metering timer N
You can change how long the exposure setting is displayed (AE lock 
time). In Basic Zone modes, mete ring timer is fixed at 16 sec.
 The Live View shooting will stop with any of the following operations. To 
resume Live View shooting, press the < A> button again.
• When selecting [ z3: Dust Delete Data], [ 53: Sensor cleaning ], 
[ 5 4: Clear settings], or [ 54:  z  firmware ver. ]
  Even if a low ISO speed is set, noise may be noticeable in the displayed...

159
You can select the AF method suiting the shooting conditions or subject. The 
following AF methods are provided: [u(face)+Tracking], [FlexiZone - 
Multi] (p.161), [FlexiZone - Single] (p.162), and [Quick mode] (p.166).
AF methods other than the [Quick mode ] use the image sensor to 
autofocus while displaying the Live View image.
Select the AF method.
 Under the [A] tab, select [AF method]. Select the desired AF method, then 
press < 0>.
  While the Live View image is 
displayed, you can also press...

160
Changing the Autofocus Method (AF Method)
 If no faces are detected or if you tap 
the LCD monitor but do not select any 
face or subject, the camera will switch 
to [FlexiZone - Multi ] with automatic 
selection (p.161).
3Focus the subject.
  Press the shutter button halfway to 
focus.
X When focus is achieved, the AF point 
will turn green and the beeper will 
sound.
X If focus is not achieved, the AF point 
will turn orange.
4Take the picture.
  Check the focus and exposure, then 
press the...