Canon Eos Rebel T5i 700d Instruction Manual

301
3 Custom Function Settings N
C.Fn IV: Operation/Others
C.Fn-6 Shutter/AE lock button
0: AF/AE lock
1: AE lock/AF
This is convenient when you want to focus and meter separately. Press 
the < A> button to autofocus, and press the shutter button halfway to 
apply AE lock.
2: AF/AF lock, no AE lock
In the AI Servo AF operation, you can press the < A> button to stop the 
AF operation momentarily. This prevents the AF from being thrown off by 
any obstacle passing between the camera and subject. The...

3 Custom Function Settings N
302
C.Fn-7 Assign SET button
You can assign a frequently-used function to < 0>. Press  when the 
camera is ready to shoot.
0: Normal (disabled)
1: Image quality
Press < 0> to display the image-recording quality setting screen on the 
LCD monitor. Select the desired image-recording quality, then press 
.
2: Flash exposure compensation
When you press < 0>, the flash exposure compensation setting screen 
will appear. Set the flash exposure compensation, then press < 0>.
3: LCD...

303
Under the My Menu tab, you can register up to six menu options and Custom Functions whose settings you change frequently.
1Select [My Menu settings].
 Under the [9 ] tab, select [My Menu 
settings ], then press < 0>.
2Select [Register to My Menu].
  Select [ Register to My Menu ], then 
press < 0>.
3Register the desired items.
  Select an item to register, then press 
.
  On the confirmation dialog, select 
[OK ] and press < 0> to register the 
item.
  You can register up to six items.
  To return to...

COPY  

305
13
Reference
This chapter provides reference information for camera 
features, system accessories, etc.
Certification LogoIf you select [54: Certification Logo Display ] and press , 
some of the logos of the camera’s  certifications will appear. Other 
certification logos can be found in this Instruction Manual, on the 
camera body, or on the camera’s package.
COPY  

306
With AC Adapter Kit ACK-E8 (sold separately), you can connect the 
camera to a household power outlet and not worry about the remaining 
battery level.
1Connect the power cord.
  Connect the power cord as shown in 
the illustration.
  After using the camera, unplug the 
power plug from the power outlet.
2Connect the DC Coupler.
 Connect the DC cord’s plug to the DC 
Coupler.
3Insert the DC Coupler.
 Open the cover and insert the DC 
Coupler until it locks in place.
4Push in the DC cord.
 Open the DC...

307
This remote controller enables you to take pictures wirelessly up to 
approx. 5 meters/16.4 feet from the camera. You can either shoot 
immediately or use a 2-sec. delay.
  Set the self-timer to < Q> (p.106).
  Point the remote controller toward the camera’s remote control 
sensor and press the transmit button.
X The camera will autofocus.
X When focus is achieved, the self-timer lamp will light up and the 
picture will be taken.
Remote Control Shooting
Remote Controller RC-6 (Sold Separately)
Remote...

Remote Control Shooting
308
Remote Switch RS-60E3 (sold separately) comes with an approx. 
60 cm/2.0 ft cord. When connected to the camera’s remote control 
terminal, it can be pressed halfway and completely, just like the shutter 
button.
When you use the self-timer, bulb, or Remote Switch and do not look 
through the viewfinder, stray light entering the viewfinder can cause the 
image to look dark. To prevent this, use the eyepiece cover (p.27) 
attached to the camera strap.
During Live View shooting...

309
Basically operates like a built-in flash for easy operation.
When an EX-series Speedlite (sold separately) is attached to the 
camera, almost all the autoflash control is done by the camera. In other 
words, it is like a high-output flash attached externally in place of the 
built-in flash.
For detailed instructions, refer to the EX-series Speedlite’s 
instruction manual.  This camera is a Type-A camera that can use all 
the features of EX-series Speedlites.
External Speedlites
EOS-dedicated, EX-...

External Speedlites
310
 With an EZ/E/EG/ML/TL-series Speedlite set in TTL or A-TTL 
autoflash mode, the flash can be fired at full output only. 
Set the camera’s shooting mode to < a> (manual exposure) or 
< f > (aperture-priority AE) and adjust the aperture setting before 
shooting.
  When using a Speedlite that has ma nual flash mode, shoot in the 
manual flash mode.
Sync Speed
The camera can synchronize with  compact, non-Canon flash units at 
1/200 sec. or slower shutter s peeds. Use a sync speed...