Canon Eos Rebel T5i 700d Instruction Manual

281
Preparing to Print
6Play back the image.
 Press the  button.
X The image will appear, and the < w> 
icon will appear on the upper left to 
indicate that the camera is connected 
to a printer.
wPictBridge
  Before using the printer, make sure it has a PictBridge connection port.
  Movies cannot be printed.
  The camera cannot be used with printers compatible only with CP Direct 
or Bubble Jet Direct.
  Do not use any interface cable other than the one provided.
  If there is a long beeping sound in...

282
The screen display and setting options will differ depending on the 
printer. Some settings may not be available. For details, refer to the 
printer’s instruction manual.
1Select the image to be printed.
 Check that the < w> icon is 
displayed on the upper left of the LCD 
monitor.
  Press the < U> key to select the 
image to be printed.
2Press .
X The print setting screen will appear.
3Select [Paper settings].
  Select [ Paper settings ], then press 
< 0 >.
X The paper settings screen will 
appear....

283
wPrinting
 Select the size of the paper loaded in 
the printer, then press < 0>.
X The paper type screen will appear.
  Select the type of the paper loaded in 
the printer, then press < 0>.
X The page layout screen will appear.
  Select the page layout, then press 
.
X The print settings screen will 
reappear.
*1:From the Exif data, the camera name, lens  name, shooting mode, shutter speed, aperture, 
exposure compensation amount, ISO speed, white balance, etc., will be imprinted.
*2: After ordering...

wPrinting
284
4Set the printing effects (image 
optimization).
 Set them if necessary. If you do not 
need to set any printing effects, go to 
step 5.
  What is displayed on the screen 
differs depending on the printer.
  Select the option, then press .
  Select the desired printing effect, then 
press < 0>.
  If the < e> icon is displayed brightly 
next to < z>, you can also adjust 
the printing effect (p.286).
* When you change the printing effects, changes are reflected in the image 
displayed on the...

285
wPrinting
5Set the date and file number 
imprinting.
 Set them if necessary.
  Select <
I>, then press < 0>.
  Set as desired, then press .
6Set the number of copies.
 Set it if necessary.
  Select <
R>, then press .
  Set the number of copies, then press 
.
7Start printing.
  Select [ Print], then press < 0>.
  With Easy printing, you can print another image using the same settings. 
Just select the image and press the  button. With Easy printing, the 
number of copies will always be 1. (You cannot...

wPrinting
286
In step 4 on page 284, select the printing 
effect. When the < e> icon is displayed 
brightly next to < z>, you can press 
the < B> button. You can then adjust 
the printing effect. What can be adjusted 
or what is displayed will depend on the 
selection made in step 4.
  Brightness
The image brightness can be adjusted.
  Adjust levels
When you select [ Manual], you can change 
the histogram’s distribution and adjust the 
image’s brightness and contrast.
With the Adjust levels screen...

287
wPrinting
You can crop the image and print only 
the cropped portion as if the image was 
recomposed.
Set the cropping right before printing. 
If you set the cropping and then set the 
print settings, you may have to set the 
cropping again before printing.
1 On the print settings screen, select [Cropping].
2 Set the cropping frame size, position, and aspect ratio.
 The image area within the cropping frame will be printed. The 
cropping frame’s aspect ratio can be changed with [Paper settings ]....

wPrinting
288
 Depending on the printer, the cropped image area may not be printed as 
you specified.
  The smaller you make the cropping fr ame, the grainier the picture will 
look in the print.
  While cropping the image, look at the camera’s LCD monitor. If you look 
at the image on a TV screen, the cropping frame may not be displayed 
accurately.
Handling Printer ErrorsIf you resolve a printer error (no ink, no paper, etc.) and select [ Continue] to 
resume printing but it does not resume, operate...

289
You can set the print type, date imprinting, and file number imprinting. 
The print settings will be applied to all print-ordered images. (They 
cannot be set individually for each image.)
1Select [Print order].
 Under the [x 1] tab, select [Print 
order ], then press < 0>.
2Select [Set up].
  Select [ Set up], then press < 0>.
3Set the options as desired.
  Set the [ Print type ], [Date ], and [ File 
No. ].
  Select the option to be set, then press 
. Select the desired setting, 
then press < 0>.
W...

W Digital Print Order Format (DPOF)
290
4Exit the setting.
  Press the < 7> button.
X The print order screen will reappear.
  Next, select [Sel.Image], [ Byn ], or 
[All image ] to order the images to be 
printed.
Print type
KStandard Prints one image on one sheet.
LIndexMultiple thumbnail images are printed on one sheet.
K
LBothPrints both the standard and index prints.
Date On
[On ] imprints the recorded date on the print.
Off
File numberOn[On ] imprints the file number on the print.
Off
  Even if...