Canon Eos Rebel T5i 700d Instruction Manual

291
W Digital Print Order Format (DPOF)
  Sel.Image
Select and order images one by one.
To display the three-image display, press 
the  button. To return to the 
single-image display, press the < u> 
button.
Press the < M> button to save the 
print order to the card.
[Standard] [Both]
Press the < V> key to set the number of 
copies to be printed for the displayed 
image.
[Index]
Press < 0> to add a checkmark to the 
box < X>. The image will be included in 
the index print.
  Byn
Select [ Mark all in...

292
With a PictBridge printer, you can easily 
print images with DPOF.
1Prepare to print.
 See page 280. Follow the “Connecting the Camera to a Printer” 
procedure up to step 5.
2Under the [ x1] tab, select [Print order].
3Select [Print].
  [Print ] will be displayed only if th e camera is connected to a 
printer and printing is possible.
4Set the [Paper settings] (p.282).
  Set the printing effects (p.284) if necessary.
5Select [OK].
W Direct Printing with DPOF
  Before printing, be sure to set the...

293
When you select images (up to 998 images) to be used for a photobook 
and transfer them from the camera to a computer using EOS Utility 
(provided software), the images will be copied to a dedicated folder. 
This function is convenient when you order a photobook from the 
Internet.
1Select [Photobook Set-up].
 Under the [x 1] tab, select 
[Photobook Set-up ], then press 
< 0 >.
2Select [Select images].
  Select [ Select images ], then press 
< 0 >.
X The images will be displayed.
  To display the...

p Specifying Images for a Photobook
294
You can specify all the images in a folder or card at one time.
When [x1: Photobook Set-up ] is set 
to [All images in folder ] or [All images 
on card ], all the images in the folder or 
on the card will be specified.
To cancel the image specification, select 
[Clear all in folder ] or [Clear all on 
card ].
Specifying All Images in a Folder or on a Card
1 images and movies cannot be specified.
Do not specify images already specif ied for a photobook in another...

295
12
Customizing theCamera
You can customize various camera functions to suit 
your picture-taking preferences with Custom Functions. 
Custom Functions can be set and used only in Creative 
Zone modes.
 Creative Zone
COPY  

296
1Select [Custom Functions (C.Fn)].
 Under the [5 4] tab, select [ Custom 
Functions (C.Fn) ], then press .
2Select the Custom Function 
number.
  Press the < U> key to select the 
Custom Function number, then press 
< 0 >.
3Change the setting as desired.
  Press the < V> key to select the 
setting (number), then press < 0>.
  Repeat steps 2 and 3 if you want to 
set another Custom Functions.
  At the bottom of the screen, the 
current Custom Function settings are 
indicated below the respective...

297
3 Setting Custom Functions N
* [5: ISO speed ] is settable only for m anual exposure shooting. 
Custom Functions
C.Fn I: ExposureA LV  
Shooting k
Movie 
Shooting
1Exposure level incrementsp.298kk
2ISO expansionkIn  a
C.Fn II: Image
3Highlight tone priorityp.299kk
C.Fn III: Autofocus/Drive
4AF-assist beam firingp.300
k (With 
f *)
5 Mirror lockup
* If you use an EX-series Speedlite (sold separately) equipped with an LED light, 
the LED light will turn on for AF-assist even in the  c, o , and d...

298
Custom Functions are organized into four groups based on the function 
type: C.Fn I: Exposure, C.Fn II: Image, C.Fn III: Autofocus/Drive, C.Fn 
IV: Operation/Others.
3  Custom Function SettingsN
C.Fn I: Exposure
C.Fn-1 Exposure level increments
0: 1/3-stop
1: 1/2-stop
Sets 1/2-stop increments for the shutter speed, aperture, exposure 
compensation, AEB, flash exposure compensation, etc. This is effective 
when you prefer to control the exposure in less fine increments than 1/3-
stop increments....

299
3 Custom Function Settings N
C.Fn II: Image
C.Fn-3 Highlight tone priority
0: Disable
1: Enable
Improves the highlight detail. The dynamic range is expanded from the 
standard 18% gray to bright highlights. The gradation between the grays 
and highlights becomes smoother.
  With setting 1, the Auto Lighting Optimizer (p.125) is automatically set to 
[Disable ] and the setting cannot be changed.
  With setting 1, noise (grainy image, banding, etc.) may become slightly 
more pronounced than with...

3 Custom Function Settings N
300
C.Fn III: Autofocus/Drive
C.Fn-4 AF-assist beam firing
The settings to specify whether or not the AF-assist beam is emitted by the 
camera’s built-in flash or by an external, EOS-dedicated Speedlite can be 
set.
0: Enable
If necessary, the AF-assist beam will be emitted by the built-in flash or 
external Speedlite.
1: Disable
The AF-assist beam is not emitted.
2: Enable external flash only If an external Speedlite is attached, it will emit the AF-assist beam when...