Canon Eos Rebel T5i 700d Instruction Manual

271
B: Shooting Information Display
* With images taken in a Basic Zone mode, the information displayed will differ 
depending on the shooting mode.
* Photos taken in the < C> mode will show [ Background blur].
* If manual exposure was used, the shutter speed, aperture, and ISO speed  (when set manually) will be displayed.
* The < > icon will be displayed for video snapshots.
Sample Image Taken in a Basic Zone Mode
Sample Movie
Ambience effect
Lighting or sceneShooting modeAmbience
Shooting mode
Movie...

272
B: Shooting Information Display
 About the Highlight Alert
When the shooting information is di splayed, any overexposed areas of the 
image will blink. To obtain more image detail in the overexposed areas, set 
the exposure compensation to a negative amount and shoot again.
  About the Histogram
The brightness histogram shows the exposure level distribution and overall 
brightness. The RGB histogram is for checking the color saturation and 
gradation. The display can be switched with 
[x 2: Histogram...

273
10
Post-ProcessingImages
After shooting, you can apply Creative filters or resize 
the images (downsize the pixel count).
 The camera may not be able  to process images taken with 
another camera.
  Post-processing images as described in this chapter cannot be 
performed while the camera is connected to a personal 
computer via the < C> terminal.
COPY  

274
You can apply the following Creative filters to an image and save it as a 
new image: Grainy B/W, Soft focus, Fish-eye effect, Art bold effect, 
Water painting effect, Toy camera effect, and Miniature effect.
1Select [Creative filters].
 Under the [ x1] tab, select [ Creative 
filters ], then press < 0>.
X The images will be displayed.
2Select an image.
  Select the image you want to apply a 
filter to.
  By pressing the < Hy> button, you 
can switch to the index display and 
select an image.
3Select...

275
U Applying Creative Filters to the Image
5Save the image.
  Select [ OK] to save the image.
  Check the destination folder and 
image file number, then select [ OK].
  To apply a filter to another image, 
repeat steps 2 to 5.
  Press the < M> button to return to 
the menu.
  Grainy B/W
Makes the image grainy and black and white. By adjusting the 
contrast, you can change the black-and-white effect.
  Soft focus
Gives the image a soft look. By adjusting the blur, you can change 
the degree of...

276
U Applying Creative Filters to the Image
  Fish-eye effect
Gives the effect of a fish-eye lens. The image will have a barrel-type 
distortion.
Depending on the level of this filter effect, the area trimmed along 
the periphery of the image changes. Also , since this filter effect will 
magnify the image center, the apparent resolution at the center may 
degrade depending on the number of recorded pixels. Set the filter 
effect in step 4 while checking the resulting image.
  Art bold effect
Makes the...

277
You can resize an image to make the pixel count lower and save it as a 
new image. Resizing an image is possible only with JPEG 3/4 /a /b  
images.  JPEG c and  1 images cannot be resized.
1Select [Resize].
 Under the [x 1] tab, select [Resize ], 
then press < 0>.
X The images will be displayed.
2Select an image.
  Select the image you want to resize.
  By pressing the < Hy> button, you 
can switch to the index display and 
select an image.
3Select the desired image size.
  Press < 0> to display the...

278
S Resizing a JPEG Image
Resize Options According to Original Image Size
The image size displayed in step 3 on the preceding page, such as 
[***M ****x**** ], has a 3:2 aspect ratio. The image size according to 
aspect ratios is shown in the table below.
The asterisked image-recording qualit y figures do not exactly match the 
aspect ratio. The image  will be cropped slightly.
Original Image 
SizeAvailable Resize Settings
4abc
3 kkkk
4
kkk
a
kk
b
k
c
About Image Sizes
Image 
QualityAspect Ratio and...

279
11
Printing Images
 Printing  (p.280)
You can connect the camera directly to a printer and print 
out the images on the card. The camera is compatible with 
“ w PictBridge” which is the standard for direct printing.
  Digital Print Order Format (DPOF)  (p.289)
DPOF (Digital Print Order Format) enables you to print 
images recorded on the card according to your printing 
instructions such as the image selection, quantity to print, 
etc. You can print multiple images in one batch or give the 
print...

280
The direct printing procedure can be performed entirely with the camera while you look at the LCD monitor.
1Set the camera’s power switch to 
.
2Set up the printer.
 For details, see the printer’s 
instruction manual.
3Connect the camera to the 
printer.
 Use the interface cable provided with 
the camera.
  Connect the cable to the camera’s 
 terminal with the cable 
plug’s < D> icon facing the front of 
the camera.
  To connect to the printer, refer to the 
printer’s instruction manual.
4Turn on the...