Canon Eos Rebel T5i 700d Instruction Manual

							251
Q Quick Control During Playback
To rotate an image, set [ 51: Auto rotate ] to [OnzD]. If [ 51: Auto rotate ] 
is set to [ OnD] or [ Off], the [ b Rotate image ] setting will be recorded to 
the image, but the camera will not rotate the image for display.
  Pressing the < Q> button during the index display will switch to the 
single-image display and the Quick Control screen will appear. Pressing 
the < Q> button again will return to the index display.
  For images taken with another camera,  the functions you can select may 
be limited.
COPY  
						

							252
You can play back movies in the following three ways:Use the stereo AV cable AVC-DC400ST 
(sold separately) or HDMI cable HTC-
100 (sold separately) to connect the 
camera to a TV set. Then you can play 
back captured movies and still photos on 
the TV.
If you have a High-Definition TV set and 
connect your camera with an HDMI 
cable, you can watch Full High-Definition 
(Full HD: 1920x1080) and High-
Definition (HD: 1280x720) movies with 
higher image quality.
You can play back movies on the 
camera’s LCD monitor. You can also edit 
out the movie’s first and last scenes, and 
play back the still photos and movies on 
the card in an automatic slide show.
k  Enjoying Movies
Playback on a TV set(p.262, 265)
Playback on the Camera’s LCD Monitor(p.254-261)
  Since hard disk recorders do not have an HDMI IN terminal, the camera 
cannot be connected to a hard disk recorder with an HDMI cable.
  Even if you connect the camera to a hard disk recorder with a cable, you 
cannot play or save movies and images.
  If the playback device is not compatible with MOV files, the movie cannot 
be played.
A movie edited with a personal computer cannot be rewritten to the card and 
played back with the camera. However, video snapshot albums edited with 
EOS Video Snapshot Task (p.195) can be played on the camera.
COPY  
						

							253
k Enjoying Movies
The movie files recorded on the card can 
be transferred to a personal computer 
and played with ImageBrowser EX 
(provided software).
Playback and Editing with a Personal Computer(p.364)
 To have the movie play back smoothly on a personal computer, use a 
high-performance personal computer. Regarding the computer hardware 
requirements for ImageBrowser EX, refer to the PDF file ImageBrowser 
EX User Guide.
  If you want to use commercially-availa ble software to play back or edit 
the movies, make sure it is compat ible with MOV files. For details on 
commercially-available software, contact the software manufacturer.
COPY  
						

							254
1Play back the image.
 Press the < x> button to display 
images.
2Select a movie.
 Press the < U > key to select a movie. On the single-image display, the 
 icon displayed on the 
upper left indicates a movie. If the 
movie is a video snapshot, < > 
will be displayed.
  You can press the < B> button to 
switch to the shooting information 
display (p.271).
 
In the index display, perforations at the 
left edge of a thumbnail indicate a 
movie. 
As movies cannot be played 
on the index display, press 
< 0 > to 
switch to the single-image display.
3In the single-image display, press 
< 0>.
X The movie playback panel will appear 
at the bottom of the screen.
4Play back the movie.
  Select [ 7] (Play), then press < 0>.
X The movie will start playing.
  You can pause the movie playback by 
pressing < 0>.
  During movie playback, you can turn 
the < 6> dial to adjust the built-in 
speaker’s sound volume.
  For more details on the playback 
procedure, see the next page.
k  Playing Movies
Speaker
The camera might not be able to play movies shot by another camera.
COPY  
						

							255
k Playing Movies
Movie Playback Panel
* When background music is set, the movie’s sound will not be played.
Ta p  [7] at the center of the screen.
XThe movie will start playing.
  To display the movie playback panel, 
tap < s1 > on the upper left of the 
screen.
  To pause the movie while it is playing, 
tap the screen. The movie playback 
panel will also appear.
OperationPlayback Description
7 PlayPressing < 0> toggles between play and stop.
8 Slow motionAdjust the slow motion speed by pressing the  key. The 
slow-motion speed is indicated at the upper right of the screen.
5 First frameDisplays the movie’s first frame.
3 Previous 
frameEach time you press < 0>, the previous frame is displayed. 
If you hold down < 0>, it will rewind the movie.
6 Next frameEach time you press < 0>, the movie will play frame-by-
frame. If you hold down < 0>, it will fast forward the movie.
4 Last frameDisplays the movie’s last frame.
 Background 
music*Play back a movie with the selected background music 
(p.261).
X  EditDisplays the editing screen (p.256).
Play back position
mm’ ss”Playback time (minutes:seconds)
9 VolumeYou can adjust the built-in speaker’s (p.254) volume by 
turning the < 6> dial.
3 2Pressing the  button returns to the single-image display.
Playback with the Touch Screen
 With a fully-charged Battery Pack LP -E8, the continuous playback time 
at 23°C/73°F will be as follows: approx. 2 hr. 30 min.
  If you took a still photo while you shot the movie, the still photo will be 
displayed for approx. 1 sec. during the movie playback.
COPY  
						

							256
You can edit out the first and last scenes of a movie (except video snapshots) in 1-sec. increments.
1On the movie playback screen, 
select [X].
X The editing screen wi ll be displayed.
2Specify the part to be edited out.
 Select either [ U] (Cut beginning) or 
[V ] (Cut end), then press < 0>.
  Press the < U> key to see the 
previous or next frames. Holding it 
down will fast forward the frames.
  After deciding which part to edit out, 
press < 0>. The portion highlighted 
in blue on the top of the screen is 
what will remain.
3Check the edited movie.
  Select [ 7] and press < 0> to play 
back the portion highlighted in blue.
  To change the editing, go back to step 
2.
  To cancel the editing, press the 
 button, select [ OK] on the 
confirmation screen, then press 
< 0 >.
X Editing a Movie’s First and Last Scenes
COPY  
						

							257
X Editing a Movie’s First and Last Scenes
4Save the edited movie.
  Select [ W], then press < 0>.
X The save screen will appear.
  To save it as a new movie, select 
[New file ]. To save it and overwrite 
the original movie file, select 
[Overwrite ]. Then press < 0>.
  On the confirmation screen, select 
[OK ], then press < 0> to save the 
edited movie and return to the movie 
playback screen.
  Since the editing is performed in ap prox. 1-sec. increments (position 
indicated by [ ]), the exact position where the movie is edited may differ 
slightly from the position you specified.
  If the card does not have enough free space, [ New file] will not be 
available.
  When the battery level is low, editing the movie is not possible. Use a 
fully-charged battery.
COPY  
						

							258
You can play back the images on the card as an automatic slide show.
1Select [Slide show].
 Under the [x 2] tab, select [Slide 
show ], then press < 0>.
2Select the images to be played.
  Press the < V> key to select the 
desired option, then press < 0>.
[All images/Movies/Stills]
  Press the < V> key to select one of 
the following: [ jAll images/
k Movies/z Stills]. Then press 
< 0 >.
[Date/Folder/Rating]
  Press the < V> key to select one of 
the following: [ iDate/
nFolder/
9 Rating ].
  When < zH> is highlighted, 
press the < B> button.
  Press the < V> key to select the 
desired option, then press < 0>.
3  Slide Show (Auto Playback)
Number of images to be played
[Date ][ Folder][ Rating]
COPY  
						

							259
3 Slide Show (Auto Playback)
3Set [Set up] as desired.
 Press the < V> key to select [ Set 
up ], then press < 0>.
  Set the [Display time], [ Repeat], 
[Transition effect ], and 
[Background music ] for the still 
photos.
  The background music selection 
procedure is explained on page 261.
  After selecting the settings, press the 
 button.
ItemPlayback Description
jAll imagesAll the still photos and movies  on the card will be played back.
iDateStill photos and movies taken on the selected shooting date will 
be played back.
n Folder Still photos and movies in the selected folder will be played 
back.
k
MoviesOnly the movies on the card will be played back.
zStillsOnly the still photos on  the card will be played back.
9 Rating Only the still photos and movi
es with the selected rating will be 
played back.
[Display time] [Repeat]
COPY  
						

							260
3 Slide Show (Auto Playback)
4Start the slide show.
 Press the < V> key to select [ Start], 
then press < 0>.
X After [ Loading image... ] is displayed, 
the slide show will start.
5Quit the slide show.
  To quit the slide show and return to 
the setting screen, press the < M> 
button.
[Transition effect][Background music ]
 To pause the slide show, press < 0>. During pause, [ G] will be 
displayed on the upper left of the image. Press < 0> again to resume 
the slide show. You can also pause  the slide show by tapping the screen.
  During auto playback, you can press the < B> button to change the 
still photo display format (p.84).
  During movie playback, you can adjust the sound volume by turning the 
 dial.
  During auto playback or pause, you can press the < U> key to view 
another image.
  During auto playback, auto power off will not work.
  The display time may vary depending on the image.
  To view the slide show on a TV set, see page 262.
COPY