Canon Eos Rebel T5i 700d Instruction Manual

							261
3 Slide Show (Auto Playback)
1Select [Background music].
 Set [ Background music ] to [On], 
then press < 0>.
2Select the background music.
  Press the < V> key to select the 
desired background music, then 
press < 0>. You can also select 
multiple background music tracks.
3Play the background music.
  To listen to a sample of the 
background music, press the < B> 
button.
  Press the < V> key to play another 
background music track. To stop 
listening to the background music, 
press the < B> button again.
  Adjust the sound volume by turning 
the < 6> dial.
  To delete a background music track, 
press the < V> key and select the 
track, then press the  button.
Selecting the Background Music
At the time of purchase, you cannot select background music with the 
camera. You must first use EOS Utilit y (provided software) to copy the 
background music to the card. For details , refer to the EOS Utility Instruction 
Manual on the CD-ROM.
COPY  
						

							262
You can view the still photos and movies on a TV set.
HDMI Cable HTC-100 (sold separately) is required.
1Connect the HDMI cable to the 
camera.
 With the plug’s  logo 
facing the front of the camera, insert it 
into the < D > terminal.
2Connect the HDMI cable to the TV 
set.
 Connect the HDMI cable to the TV’s 
HDMI IN port.
3Turn on the TV and switch the 
TV’s video input to select the 
connected port.
4Set the camera’s power switch to 
.
Viewing the Images on TV
Viewing on High-Definition (HD) TV Sets (Connected with HDMI)
 Adjust the movie’s sound volume with the TV set. The sound volume 
cannot be adjusted with the camera.
  Before connecting or disconnecting the cable between the camera and 
television, turn off the camera and TV set.
  Depending on the TV set, part of the image displayed may be cut off.
COPY  
						

							263
Viewing the Images on TV
5Press the  button.
XThe image will appear on the TV 
screen. (Nothing will be displayed on 
the camera’s LCD monitor.)
  The images will automatically be 
displayed at the TV’s optimum 
resolution.
  By pressing the < B> button, you 
can change the display format.
  To play back movies, see page 254.
If the TV set connected to the camera with an HDMI cable is compatible 
with HDMI CEC*, you can use the TV set’s remote control for playback 
operations.
* An HDMI-standard function enabling HDMI devices to control each other so that you can control them with one remote control unit.
1Set [Ctrl over HDMI] to [Enable].
  Under the [ x2] tab, select [ Ctrl over 
HDMI], then press < 0>.
  Select [ Enable], then press < 0>.
Using HDMI CEC TV Sets
The images cannot be output at the same time from both the < D> 
and < q                > terminals.
 Do not connect any other device’s output to the camera’s < D> 
terminal. Doing so may cause a malfunction.
  Certain TVs may not be able to play back the captured images. In such a 
case, use the stereo AV cable AVC-DC400ST (sold separately) to 
connect to the TV.
COPY  
						

							264
Viewing the Images on TV
2Connect the camera to a TV set.
 Use an HDMI cable to connect the 
camera to the TV.
X The TV’s input will switch 
automatically to the HDMI port 
connected to the camera.
3Press the camera’s < x> button.
XAn image will appear on the TV 
screen and you can use the TV’s 
remote control to play back images.
4Select an image.
  Point the remote control toward the 
TV set and press the  /  button to 
select an image.
5Press the remote control’s Enter button.
X The menu appears and you can 
perform the playback operations 
shown on the left.
 
Press the / button to select the 
desired option, then press the Enter 
button. For a slide show, press the 
remote control’s 
/ button to select 
an option, then press the Enter button.
  If you select [ Return] and press the 
Enter button, the menu will disappear 
and you can use the  / button to 
select an image.
Still photo playback menu
Movie playback menu
  Some TV sets require you to first enable the HDMI CEC connection. For 
details, refer to the TV set’s instruction manual.
  Certain TV sets, even those compatible with HDMI CEC, may not 
operate properly. In such a case , disconnect the HDMI cable, set [ x2: 
Ctrl over HDMI ] to [Disable ], and use the camera to control the 
playback operation.
: Return
: 9-image index
: Play movie
: Slide show
: Disp. shooting info
: Rotate
COPY  
						

							265
Viewing the Images on TV
Stereo AV Cable AVC-DC400ST (sold separately) is required. 
1Connect the AV cable to the 
camera.
 With the plug’s < Canon> logo facing 
the back of the camera, insert it into 
the < q
                   > terminal.
2Connect the AV cable to the TV 
set.
 Connect the AV cable to the TV’s 
video IN terminal and audio IN 
terminal.
3Turn on the TV and switch the 
TV’s video input to select the 
connected port.
4Set the camera’s power switch to 
.
5Press the  button.
XThe image will appear on the TV 
screen. (Nothing will be displayed on 
the camera’s LCD monitor.)
  To play back movies, see page 254.
Viewing on Non-HD TV Sets  (Connected with AV Cable)
AUDIO
VIDEO
(Red)
(White)
(Yellow)
  Do not use any AV cable other than the Stereo AV cable AVC-DC400ST 
(sold separately). Images may not be displayed if you use a different 
cable.
  If the video system format does not match the TV’s, the images will not 
be displayed properly. If this happens, switch to the proper video system 
format with [ 52: Video system ].
COPY  
						

							266
Protecting an image prevents it from being erased accidentally.
1Select [Protect images].
 Under the [x 1] tab, select [Protect 
images], then press < 0>.
X The protect setting screen will 
appear.
2Select [Select images].
  Select [ Select images ], then press 
< 0 >.
X The images will be displayed.
3Protect the image.
  Press the < U> key to select the 
image to be protected, then press 
< 0 >.
X When an image is protected, the 
 icon will appear on the top of 
the screen.
  To cancel the image protection, press 
 again. The  icon will 
disappear.
  To protect another image, repeat step 
3.
  Press the < M> button to return to 
the menu.
K  Protecting Images
3  Protecting a Single Image
Image protect icon
COPY  
						

							267
K Protecting Images
You can protect all the images in a folder or on a card at one time.
When you select [All images in folder] 
or [ All images on card ] in [x1: Protect 
images], all the images in the folder or 
on the card will be protected.
To cancel the image protection, select 
[Unprotect all images in folder ] or 
[Unprotect all images on card ].
3 Protecting All Images in a Folder or on a Card
If you format the card (p.48) , the protected images will also be erased.
 Movies can also be protected.
  Once an image is protected, it cannot  be erased by the camera’s erase 
function. To erase a protected image, you must first cancel the 
protection.
  If you erase all the images (p.269), only the protected images will 
remain. This is convenient when you  want to erase unnecessary images 
all at once.
COPY  
						

							268
You can either select and erase images one by one or erase them in 
one batch. Protected images (p.266) will not be erased.
Once an image is erased, it cannot be recovered. Make sure 
you no longer need the image before erasing it. To prevent 
important images from being erased accidentally, protect 
them. Erasing a 1 +73  image will erase both the RAW and 
JPEG images.
1Play back the image to be erased.
2Press the  button.
XThe Erase menu will appear at the 
bottom of the screen.
3Erase the image.
  Select [ Erase], then press < 0>. The 
image displayed will be erased.
By appending checkmarks < X> to the images to be erased, you can 
erase multiple images at one time.
1Select [Erase images].
  Under the [x 1] tab, select [Erase 
images], then press < 0>.
L Erasing Images
Erasing a Single Image
3  Checkmarking < X> Images to be Erased in a Batch
COPY  
						

							269
L Erasing Images
2Select [Select and erase images].
  Select [ Select and erase images ], 
then press < 0>.
X The images will be displayed.
  To display the three-image display, 
press the < Hy> button. To return to 
the single-image display, press the 
< u > button.
3Select the images to be erased.
  Press the < U> key to select the 
image to be erased, then press 
< 0 >.
X A checkmark  will be displayed 
on the upper left of the screen.
  To select other images to be erased, 
repeat step 3.
4Erase the image.
 Press the < L> button.
  Select [ OK], then press < 0>.
X The selected images will be erased.
You can erase all the images in a folder or on a card at one time. When 
[x 1: Erase images ] is set to [All images in folder ] or [All images on 
card ], all the images in the folder or on the card will be erased.
3  Erasing All Images in a Folder or on a Card
To also erase protected images, format the card (p.48).
COPY  
						

							270
* With 1+73  images, the  1 file size is displayed.
* For still photos taken during movie shooting, < G> will be displayed.
* If a Creative filter or Resize has been applied to the image, the < u> icon will be 
displayed.
* Photos taken with flash without any  flash exposure compensation are marked 
with the < > icon. Photos taken with flash exposure compensation are marked 
with the < y> icon.
B : Shooting Information Display
Sample Image Taken in a Creative Zone Mode
Flash exposure compensation
amount
Metering mode
Shooting mode
Highlight tone priority
Shooting date and time
White balance correctionHistogram
(Brightness/RGB)
Color space
White balance
Picture Style/Settings
File size
Image-recording quality
Playbacknumber/
Total images
recorded
Folder number - File number
Rating
Aperture
Shutter speed Protect imagesExposure compensation amount
ISO speed
Eye-Fi transfer
COPY