Canon Eos Rebel T5i 700d Instruction Manual

							21
Nomenclature
Display off sensor (p.50, 217)Dioptric adjustment knob (p.42)
Card slot
cover (p.31)
Access lamp  (p.32)
Battery compartment
cover release lever  (p.30)
Battery compartment cover
(p.30)
Viewfinder eyepiece
Eyecup (p.308)  Live View shooting/
Movie shooting button (p.146/174)
 AE lock/
FE lock button/
Index/Reduce button
(p.123/124/242/244, 287)

AF point selection/
Magnify button
(p.100/244, 287)
Speaker
(p.254)
DC cord hole
(p.306)
 Info button
(p.50, 84, 148, 179, 213)
 Menu
button
 (p.46)
LCD monitor/
T ouch screen
(p.33, 46, 205/
53, 245, 255)
 Aperture/
Exposure compensation
button (p.1 15/1

19)
 Quick Control button /
Direct print button (p.44/285)
 Cross keys  (p.46)
  White balance selection button (p.137)
  Picture Style selection button (p.95)
  Drive mode selection button (p.104, 106)
  AF operation selection button (p.97)  Setting button
 (p.46)  Erase button (p.268) 
Card slot (p.31)
 Playback button (p.84)
T
ripod socket
COPY  
						

							22
Nomenclature
Shooting Settings (in Creative Zone modes, p.24)
The display will show only the settings currently applied.
Shutter speed
Shooting mode Aperture
ISO speed (p.92)
Self-timer countdown Number of possible shots
Battery check
 (p.35)
zxcn
Quick Control icon
 (p.44)
Exposure level indicator
Exposure compensation
amount (p.119)
AEB range (p.121)
White balance (p.137)
 Q Auto
 W  Daylight
E Shade
R Cloudy
 Y Tungsten light
 U   White fluorescent light
 I  Flash
 O  Custom Image-recording 
quality (p.88)
73 
Large/Fine
83 Large/Normal
74 Medium/Fine
84 Medium/Normal
7a Small 1/Fine
8a Small 1/Normal
b  Small 2 (Fine)
c  Small 3 (Fine)
1+73 
 RAW+Large/Fine
1 RAW
AF operation  (p.97)
X
One-Shot AF
9
AI Focus AF
Z
AI Servo AF
MF
Manual Focus Picture Style (p.95)
Auto Lighting Optimizer (p.125)
Main Dial pointer
Multi Shot Noise Reduction (p.126) Highlight tone priority 
(p.299)
Built-in flash settings
(p.220) y Flash exposure
compensation (p.120)
0 External flash
exposure compensation
Number of possible shots
during WB bracketing
Eye-Fi transmission status (p.31 1)
GPS connection indicator
Drive mode (p.104, 106)
u

 Single shooting
i  Continuous shooting
Q  Self-timer:10 sec/Remote control
l  Self-timer:2 sec
q  Self-timer:Continuous Metering mode (p.117)
q Evaluative metering
w Partial metering
r Spot metering
e Center-weighted average meteringu White balance correction (p.139)
B White balance bracketing (p.140)
COPY  
						

							23
Nomenclature
Viewfinder Information
The display will show only the settings currently applied.
AF point activation indicator 
AF points
 Flash-ready 
 Improper FE lock warning Max. burst
 
Focus
 confirmation light
 High-speed sync
 (FP flash)
 FE  lock/FEB  in-progress
 Flash exposure
 compensation
Card full warning (FuLL)
Card error warning (Card)
No card warning ( Card)
Exposure level indicator
  Exposure compensation amount
 AEB range
Red-eye reduction lamp-on indicator
 Highlight tone priority
 Monochrome 
 shooting
ISO speed
Shutter speed
FE lock (FEL)
Busy (buSY)
Built-in flash recycling  (D buSY)Aperture
Spot metering circle
Focusing screen
 AE  lock/
 AEB in-progress 
White balance
correction

ISO speed
COPY  
						

							24
Nomenclature
Mode Dial
The Mode Dial includes the Basic Zone modes and Creative Zone 
modes.
Basic Zone
All you do is press the shutter button. 
The camera sets everything to suit the 
subject or scene.
A: Scene Intelligent Auto  (p.58)
7 : Flash Off  (p.63)
C : Creative Auto  (p.64)
Creative Zone
These modes give you more control for 
shooting various subjects.
d
: Program AE (p.86)
s : Shutter-priority AE (p.110)
f : Aperture-priority AE (p.112)
a : Manual exposure (p.115)
Image Zone 2 : Portrait (p.67)
3 : Landscape (p.68)
4 : Close-up (p.69)
5 : Sports (p.70)
8: Special Scene Mode (p.71)
6 : Night Portrait (p.72)
F : Handheld Night Scene (p.73)
G: HDR Backlight Control (p.74)
COPY  
						

							25
Nomenclature
Lens
Lens without a distance scale
Lens with a distance scale
Image Stabilizer switch (p.41)
Lens mount index  (p.39) Contacts (p.17)
Zoom ring 
(p.40) Focus mode switch
 (p.39)
Focusing ring (p.103, 170)
Hood mount (p.344) Zoom position index (p.40)
Filter thread
(front of lens) (p.344)
Focus mode switch  (p.39)
Zoom ring  (p.40)
Image Stabilizer switch  (p.41)Lens mount index (p.39)
Contacts (p.17)
Hood mount (p.344)
Distance scale
Zoom position index (p.40)
Focusing ring (p.103, 170)
Filter thread
(front of lens) (p.344)
COPY  
						

							26
Nomenclature
Battery Charger LC-E8
Charger for Battery Pack LP-E8 (p.28).
Battery Charger LC-E8E
Charger for Battery Pack LP-E8 (p.28).
Battery pack slotPower plug
Charge lamp
Full-charge lamp
IMPORTANT SAFETY INSTRUCTIONS-SAVE THESE INSTRUCTIONS.
DANGER-TO REDUCE THE RISK OF  FIRE OR ELECTRIC SHOCK, 
CAREFULLY FOLLOW THESE INSTRUCTIONS.
For connection to a supply not in the U.S.A., use an attachment plug adapter 
of the proper configuration for the power outlet, if needed.
Power cord 
Power cord socket Battery pack slot 
Charge lamp
Full-charge lamp
COPY  
						

							27
1
Getting Started
This chapter explains preparatory steps before you start 
shooting and basic camera operations.
Attaching the Strap
Pass the end of the strap through 
the camera’s strap mount eyelet 
from the bottom. Then pass it 
through the strap’s buckle as shown 
in the illustration. Pull the strap to 
take up any slack and make sure 
the strap will not loosen from the 
buckle.
 The eyepiece cover is also 
attached to the strap (p.308).
Eyepiece cover
COPY  
						

							28
1Remove the protective cover.
 Detach the protective cover provided 
with the battery.
2Attach the battery.
 As shown in the illustration, attach the 
battery securely to the charger.
  To detach the battery, follow the 
above procedure in reverse.
3Recharge the battery.
For LC-E8
 As shown by the arrow, flip out the 
battery charger’s prongs and insert 
the prongs into a power outlet.
For LC-E8E
 Connect the power cord to the 
charger and insert the plug into a 
power outlet. 
X Recharging starts automatically and 
the charge lamp lights up in orange.
X When the battery is fully recharged, 
the full-charge lamp will light up in 
green.
  It takes approx. 2 hours to fully recharge a completely 
exhausted battery at 23°C / 73°F. The time required to recharge 
the battery will vary greatly depending on the ambient 
temperature and the battery’s remaining capacity.
  For safety reasons, recharging in low temperatures (6
°C - 10°C / 
43
°F - 50°F) will take longer (up to approx. 4 hours).
Charging the Battery
LC-E8
LC-E8E
COPY  
						

							29
Charging the Battery
 Upon purchase, the battery is not fully charged.
Recharge the battery before using.
  Recharge the battery on the day before or on the day it is to be 
used.
Even during storage, a charged batte ry will gradually drain and lose 
its capacity.
  After recharging the battery, detach it and disconnect the 
charger from the power outlet.
  When not using the camera, remove the battery.
If the battery is left in the camera for a prolonged period, a small 
amount of power current is releas ed, resulting in excess discharge 
and shorter battery life. Store the ba ttery with the protective cover 
(provided) attached. Storing the battery when it is fully charged may 
lower the battery’s performance.
  The battery charger can also be used in foreign countries.
The battery charger is compatible with a 100 V AC to 240 V AC 50/
60 Hz power source. If necessary, attach a commercially-available 
plug adapter for the respective country or region. Do not attach any 
portable voltage transformer to t he battery charger. Doing so can 
damage the battery charger.
  If the battery becomes exhausted quickly even after being fully 
charged, the battery has reached the end of its service life.
Purchase a new battery.
Tips for Using the Battery and Charger
  After disconnecting the charger’s power plug, do not touch the prongs for 
at least 3 sec.
  Do not charge any battery other than a Battery Pack LP-E8.
  Battery Pack LP-E8 is dedicated to Canon products only. Using it with an 
incompatible battery charger or product may result in malfunction or 
accidents for which Canon cannot be held liable.
COPY  
						

							30
Load a fully charged Battery Pack LP-E8 into the camera.
1Open the cover.
 Slide the lever as shown by the 
arrows and open the cover.
2Insert the battery.
 Insert the end with the battery 
contacts.
  Insert the battery until it locks in 
place.
3Close the cover.
 Press the cover until it snaps shut.
Open the cover and remove the 
battery.
 Press the battery release lever as shown 
by the arrow and remove the battery.
 To prevent short circuiting of the 
battery contacts, be sure to attach the 
protective cover (provided, p.28) to 
the battery.
Installing and Removing the Battery
Installing the Battery
Removing the Battery
After opening the battery compartment cover, be careful not to swing it back 
further. Otherwise, the hinge may break.
COPY