Canon Eos Rebel T5i 700d Instruction Manual

							171
Live View Shooting Cautions
Image Quality When you shoot at high ISO speeds,  noise (such as dots of light and 
banding) may become noticeable.
  Shooting in high temperatures may cause noise and irregular colors in 
the image.
  If Live View shooting is used continuously for a long period, the camera’s 
internal temperature may rise, and image quality may deteriorate. Stop 
Live View shooting when not shooting images.
  If you shoot a long exposure while the  camera’s internal temperature is 
high, image quality may deteriorate. Stop Live View shooting and wait a 
few minutes before shooting again.
White < s> and Red < E> Internal Temperature Warning  If the camera’s internal temperature increases due to prolonged Live 
View shooting or under a high ambient temperature, a white icon < s> 
will appear. If you continue shooting while this icon is displayed, the 
image quality of still photos may deteriorate. It is recommended to 
temporarily exit Live View shooting and allow the camera to cool down 
before shooting again.
  If the camera’s internal temperature further increases while the white 
icon < s> is displayed, a red icon < E> will start blinking. This blinking 
icon indicates that the Live View shooting will soon stop automatically. If 
this happens, you will not be able to shoot again until the camera’s 
internal temperature decreases. Turn off the power and let the camera 
rest for a while.
  Using Live View shooting at a high temperature for a prolonged period 
will cause the < s> and  icons to appear earlier. When you are not 
shooting, turn off the camera.
 
If the camera’s internal temperature is high, the image quality of high ISO 
speed images or long exposures ma y be degraded even before the white 
icon 
< s > is displayed.
COPY  
						

							172
Live View Shooting Cautions
Shooting Result
 If you take the picture in magnified view, the exposure may not come out 
as desired. Return to the normal view before taking the picture. In 
magnified view, the shutter speed and aperture will be displayed in 
orange. Even if you take the picture in magnified view, the image will be 
captured in the normal view.
  If [z 2: Auto Lighting Optimizer ] (p.125) is not set to [Disable], the 
image may look bright even if a  decreased exposure compensation or 
decreased flash exposure compensation is set.
  If you use a TS-E lens (other than the TS-E17mm f/4L or TS-E24mm 
f/3.5L II) and shift or tilt the lens or use an Extension Tube, the standard 
exposure may not be obtained or an irregular exposure may result.
Live View Image
  Under low- or bright-light conditions, the Live View image may not reflect 
the brightness of the captured image.
  If the light source within the image changes, the screen may flicker. If this 
happens, exit Live View shooting and resume shooting under the actual 
light source.
  If you point the camera to a different direction, it may throw off the Live 
View image’s correct brightness momentarily. Wait until the brightness 
level stabilizes before shooting.
  If there is a very bright light source in the picture, the bright area might 
appear black on the LCD monitor. However, the actual captured image 
will correctly show the bright area.
  In low light, if you set the [ 52: LCD brightness] to a bright setting, 
chrominance noise may appear in the Live View image. However, the 
chrominance noise will not be recorded in the captured image.
  When you magnify the image, the image sharpness may look more 
pronounced than in the actual image.
Custom Functions
  During Live View shooting, certain Custom Function settings will not take 
effect (p.297).
Lens and Flash
  The focus preset function is possible for Live View shooting only when 
using a (super) telephoto lens equipped with the focus preset mode 
marketed since the second half of 2011.
  FE lock is not possible when the built-in flash or an external Speedlite is 
used. Modeling flash will not work  with an external Speedlite.
COPY  
						

							173
6
Shooting Movies
You can shoot movies by setting 
the power switch to . The 
movie recording format will be 
MOV.
Cards that can record moviesWhen shooting movies, use a large-capacity SD card rated SD 
Speed Class 6 “ ” or higher.
If you use a slow-writing card w hen shooting movies, the movie 
may not be recorded properly. Also, if you play back a movie on a 
card with a slow reading speed, the movie may not play back 
properly.
To check the card’s read/write speed, refer to the card 
manufacturer’s Web site.
About Full HD 1080Full HD 1080 indicates compatibility with High-
Definition featuring 1080 vertical pixels (scanning 
lines).
COPY  
						

							174
Connecting the camera to a TV set is recommended to play back the movies shot (p.262, 265).
When the shooting mode is not set to , autoexposure control will 
take effect to suit the scene’s current brightness.
1Set the power switch to < k>.
XThe reflex mirror will make a sound, 
then the image will appear on the 
LCD monitor.
2Set the shooting mode.
  Set the Mode Dial to any shooting 
mode except < a>.
3Focus the subject.
  Before shooting a movie, focus with 
AF or manual focus (p.159-167, 170).
  By default, [ Movie Servo AF: 
Enable ] is set so that the camera will 
always focus. To stop Movie Servo 
AF, see page 196.
4Shoot the movie.
  Press the < A> button to start 
shooting a movie. To stop movie 
shooting, press < A> again.
X While the movie is being shot, the 
“o ” mark will be displayed on the 
upper right of the screen.
k  Shooting Movies
Autoexposure Shooting
Recording movie
Microphone
COPY  
						

							175
k Shooting Movies
This camera is compatible with the function turning on the LED light 
automatically in low-light conditions during  autoexposure shooting.  For 
details, refer to the Speedlite’s instruction manual.
Using an EX-series Speedlite (Sold Separately) Equipped with an LED Light
  Cautions for movie shooting are on pages 200 and 201.
  If necessary, also read the Live View shooting cautions on pages 
171 and 172.
 In Basic Zone modes, the shooting result will be the same as in the 
 mode. Also, the scene icon for the scene detected by the camera 
is displayed on the upper left (p.176).
  In the < f> and < s> shooting modes, the settings will be the same 
as in the < d> mode.
  Settable menu functions will differ between Basic Zone modes and 
Creative Zone modes (p.322).
  The ISO speed (ISO 100 - ISO 6400), shutter speed, and aperture are 
set automatically.
  In Creative Zone modes, you can press the < A> button to lock the 
exposure (AE lock, p.123,198). After applying AE lock during movie 
shooting, you can cancel it by pressing the < S> button. (AE lock setting 
is retained until you press the < S> button.)
  In Creative Zone modes, you can hold down the < O> button and turn 
the < 6> dial to set the exposure compensation.
  Pressing the shutter button halfway displays the shutter speed and ISO 
speed at the bottom of the screen. This is the exposure setting for taking 
a still photo (p.179). The exposure setting for movie shooting is not 
displayed. Note that the exposure setting for movie shooting may differ 
from that for still photo shooting.
  If you shoot a movie with autoexposure, the shutter speed and aperture 
will not be recorded in the image information (Exif).
COPY  
						

							176
k Shooting Movies
During movie shooting in a Basic Zone mode, an icon representing the 
scene detected by the camera will be displayed and the shooting will be 
adapted to that scene. For certain scenes or shooting conditions, the 
icon displayed may not match the actual scene.
*1: Displayed only when the AF method is set to [ u+Tracking ]. If another AF method is 
set, the “Non-Portrait” icon will be displayed even if a person is detected.
*2: Displayed when the attached lens has distance information. With an Extension Tube  or Closeup Lens, the icon displayed may not match the actual scene.
*3: The icon suiting the scene detected will be displayed.
Scene Icons
SubjectPortrait*1Non-Portrait Background 
Color
BackgroundNature and 
Outdoor SceneClose*2
BrightGrayBacklit
Blue sky included
Light blue
Backlit
Sunset*3*3Orange
Spotlight Dark blue
Dark
COPY  
						

							177
k Shooting Movies
In the  mode, you can freely set the shutter speed, aperture, and 
ISO speed for the movie shooting. Using manual exposure to shoot 
movies is for advanced users.
1Set the power switch to < k>.
XThe reflex mirror will make a sound, 
then the image will appear on the 
LCD monitor.
2Set the Mode Dial to < a>.
3Set the shutter speed and 
aperture.
  To set the shutter speed, turn the 
 dial. The settable shutter 
speeds depend on the frame rate 
< 9 >.
• 8 /  7 : 1/4000 sec. - 1/60 sec.
• 6  / 5  / 4 : 1/4000 sec. - 1/30 sec.
  To set the aperture, hold down the 
 button and turn the < 6> 
dial.
4 Set the ISO speed.
  Press the < i> button and press 
the < U> key or turn the < 6> dial 
to select the ISO speed.
  For details on the ISO speed, see the 
next page.
Manual Exposure Shooting
 
< O > + 
COPY  
						

							178
k Shooting Movies
5Focus and shoot the movie.
 The procedure is the same as steps 3 
and 4 for “Autoexposure Shooting” 
(p.174).
ISO speed during manual-exposure shooting
  With [ Auto], the ISO speed will be set automatically within ISO 100 - 
ISO 6400.
  You can set the ISO speed manually within ISO 100 - ISO 6400 in 
whole-stop increments. Under [5 4: Custom Functions (C.Fn)], if 
[2: ISO expansion ] is set to [1: On], the manual setting range will 
expand so you can also select H (equivalent to ISO 12800).
  Under [5 4: Custom Functions (C.Fn) ], if [3: Highlight tone 
priority ] is set to [ 1: Enable], the ISO speed will be ISO 200 - ISO 
6400.
  Since shooting a movie at ISO 12800 may result in much noise, it is 
designated as an expanded ISO speed (displayed as “ H”).
  Under [ 54: Custom Functions (C.Fn) ], if [2: ISO expansion ] is set to 
[ 1: On ] and you switch from still photo shooting to movie shooting, the 
manual setting range’s maximum will be H (equivalent to ISO 12800). 
Even if you switch back to still photo shooting, the ISO speed will not 
revert to the original setting.
  Exposure compensati on cannot be set.
  Changing the shutter speed or aperture during movie shooting is not 
recommended since the changes in the exposure will be recorded.
  If you change the shutter speed while shooting under fluorescent or LED 
lighting, image flicker may be recorded.
 When ISO Auto is set, you can press the < A> button to lock the ISO 
speed.
  After recomposing the picture, you can see the exposure level difference 
on the exposure level indicator (p.179) compared to when you pressed 
the < A> button.
  By pressing the < B> button, you can display the histogram.
  When shooting a movie of a moving subject, a shutter speed of 1/30 sec. 
to 1/125 sec. is recommended. The faster the shutter speed, the less 
smooth the subject’s movement will look.
COPY  
						

							179
k Shooting Movies
 Each time you press the < B> button, the information display will 
change.
Information Display
AF point (FlexiZone - Single)
Exposure mode
L
: Autoexposure K: Manual exposure
ISO speed
Exposure level indicator Aperture
AE lock White balance
Movie recording size
Image-recordingquality
Shutter speed Auto Lighting 
Optimizer
AF method
• 
c : u +Tracking
•  o : FlexiZone - Multi
•  d : FlexiZone - Single
Battery check
Picture Style
Movie shooting mode: Autoexposure
 (Basic Zone modes): Autoexposure (Creative Zone modes): Manual exposure
LED light
Recording level: 
Manual
Video snapshot Possible shots
Highlight tone priority
Frame rate
Drive mode
Magnified view
GPS connection indicatorQuick Control
Movie Servo AF Movie shooting remaining time/
Elapsed time
Eye-Fi card 
transmission
Digital compass
Wind filter
Attenuator
When movie shooting starts, the movie shooting remaining time will change 
to the elapsed time.
COPY  
						

							180
k Shooting Movies
Notes on Movie Shooting
 Do not point the camera toward an intense light source, such as the sun 
on a sunny day or an intense artificial light source. Doing so may 
damage the image sensor or the camera’s internal components.
  If  is set, you should not change the ISO speed or aperture during 
movie shooting because it may also change the white balance.
 
If you shoot a movie under fluorescent or LED lighting, the movie may flicker.  Zooming the lens during movie shooting is not recommended. Zooming 
the lens can cause changes in the  exposure regardless of whether the 
lens’ maximum aperture changes  or not. Exposure changes may be 
recorded as a result.
  You cannot magnify the image during movie shooting.
  Be careful not to cover the microphone (p.174) with your finger, etc.
  Cautions for movie shooting are on pages 200 and 201.
  If necessary, also read the Live View shooting cautions on pages 
171 and 172.
 Movie-related settings are under the [ Z1] and [ Z2] tabs (p.196).
  A movie file is recorded each time you shoot a movie. If the file size 
exceeds 4 GB, a new file will be automatically created.
  The movie image’s field of view is approx. 100% (with movie recording 
size set to [ A]).
  The sound will be recorded in stereo by the camera’s built-in microphone 
(p.174).
  Most commercially-available external stereo microphones with a 3.5 mm 
diameter miniplug can be connected to the camera. If an external 
microphone has been connected to the camera’s external microphone IN 
terminal (p.20), it will be given priority over the built-in microphone.
 
You can use Remote Controller RC-6 (sold separately, p.307) to start and 
stop the movie shooting if the drive mode is . Set the shooting timing 
switch to  (2-sec. delay), then press the tr ansmit button. If the switch is 
set to  (immediate shooting), still photo shooting will take effect.  With a fully-charged Battery Pack LP-E8, the total movie shooting time 
will be as follows: approx. 1 hr. 40 mi n. at room temperature (23°C/73°F), 
and approx. 1 hr. 20 min. at low temperature (0°C/32°F).
  The focus preset function is possible for movie shooting only when using 
a (super) telephoto lens equipped with the focus preset mode marketed 
since the second half of 2011.
COPY