Cannon Canon Allinone Mp C545 User Manual

6-2Maintenance Chapter 6
MultiPASS Guidelines
Follow these guidelines to avoid damage to your MultiPASS and harm to you or 
others:
❑Place the MultiPASS on a stable surface. Do not use an angled stand. Avoid 
setting the unit in direct sunlight.
❑Do not install the MultiPASS near devices that contain magnets or generate 
magnetic fields, such as speakers.
❑Do not subject the MultiPASS to strong physical shock or vibration.
❑Make sure the area where you use the unit is free from dust.
❑Keep the MultiPASS...

Chapter 6 Maintenance6-3
Maintenance
❑Always lift the MultiPASS as shown below. Never lift it by its multi-purpose 
tray, document support, or document tray.
Periodic Cleaning
Your MultiPASS requires little periodic maintenance. Follow these guidelines to 
keep your MultiPASS in good operating condition:
❑Before you clean the MultiPASS, be sure to print any faxes stored in memory.
❑Do not use tissue paper, paper towels, or similar materials for cleaning; they 
can stick to the components or generate...

6-4Maintenance Chapter 6
Cleaning the Outside of the MultiPASS
Clean the outer casing of the unit as follows:
1. Disconnect the power cord from the MultiPASS.
2. Wipe the exterior of the unit with a clean, soft, lint-free cloth moistened with 
water or diluted dishwashing detergent solution.
3. Plug the power cord back in.
Cleaning the Interior of the MultiPASS
Cleaning Inside the Printer Cover
To prevent ink spots and paper dust from accumulating inside the MultiPASS and 
affecting print quality, clean...

Chapter 6 Maintenance6-5
Maintenance
3. Open the printer cover by grasping the document guides and lifting.
❑If the printer cover does not open easily, slide the document guides 
outward and then open the printer cover.
Never use volatile liquids such as thinners, benzene, acetone, or any other 
chemical cleaner to clean the exterior or interior of the MultiPASS, as they can 
damage its components.
DOCUMENT GUIDE
DOCUMENT GUIDE
c
DO NOT TOUCH THE
GUIDE RAILDO NOT TOUCH THE
ROUND SHAFT
DO NOT TOUCH THE...

6-6Maintenance Chapter 6
1. Use a clean, soft, dry, lint-free cloth to remove any ink or paper debris from 
the unit’s interior, especially around the platen. Be careful not to touch the BJ 
cartridge.
2. Check the small black rollers. If they are dirty, clean them with a soft, dry 
toothbrush.
3. When finished, close the printer cover.
4. Close the document tray.
5. Plug the unit back in.
Cleaning the Scanner Components
Periodically check and clean the scanner components.
1. Disconnect the power cord...

Chapter 6 Maintenance6-7
Maintenance
3. Open the operation panel by gently pulling it toward you.
4. Clean the components as described below.
Separation roller
Use a soft, dry, clean cloth to wipe the roller.
White sheet and scanning glass
Use a clean, soft, lint-free cloth moistened with water to clean the the 
white sheet and scanning glass, then wipe them with a soft, dry, lint-free 
cloth.
Separation guide
Wipe with a dry, soft cloth.
SEPARATION GUIDE
SCANNING GLASS
SEPARATION ROLLER
WHITE SHEET 

6-8Maintenance Chapter 6
5. Clean the shaded areas of the operation panel and the unit.
❑Dirt and dust particles that collect on the underside of the operation 
panel also affect the quality of the documents you copy or send.
6. Use a soft, dry, clean cloth to wipe up paper dust around the roller.
If the scanning components are dirty, the documents you send or print will 
also be dirty.
Be sure to use a soft cloth to avoid scratching the components.
Never use volatile liquids such as thinners, benzene,...

Chapter 6 Maintenance6-9
Maintenance
7. When you are finished, close the operation panel by pressing it down from the 
center as shown.
8. Close the document tray.
9. Plug the unit back in.
Cleaning the Rollers
You will need to clean the unit’s rollers after using a package of High Resolution 
Paper. This process removes paper dust from the printer’s rollers, preventing paper 
feed problems. For details, refer to “Using the Cleaning Sheet” on page 2-18. Be sure to close the operation panel until it locks...

6-10Maintenance Chapter 6
BJ Cartridges and BJ Tanks
Canon offers several BJ cartridges and BJ tanks for use in the MultiPASS. 
❑BC-21e Color BJ Cartridge (included with the
 MultiPASS)
Contains the print head unit and two replaceable 
BJ tanks, one color (cyan, magenta, yellow) and one
black. You can replace the BJ tanks without replacing
the print head unit when you run out of ink.
❑BC-20 Black BJ Cartridge (sold separately)
Contains the print head unit and black ink only. Use
this optional cartridge...

Chapter 6 Maintenance6-11
Maintenance
Maintenance
The most important thing you can do to extend the life of your MultiPASS and to 
ensure optimum print quality is to take care of the BJ cartridges.
❑If you are using both the BC-21e Color BJ Cartridge and any of the optional BJ 
cartridges, be sure to store the BJ cartridge not being used in the Ink Cartridge 
Storage Box provided with your MultiPASS.
❑Keep BJ cartridges and BJ tanks in their sealed containers until you are ready 
to use them.
❑Do not...