Cannon Canon Allinone Mp C545 User Manual

6-12Maintenance Chapter 6
Using Ink
Canon has more engineers dedicated to creating quality ink for providing the best 
results for output on Bubble Jet printers than any other organization. Canon does 
not prohibit the use of third-party inks and the use of third-party inks does not 
invalidate the product’s limited warranty. However, Canon cannot guarantee the 
quality or performance of your unit when you are using inks from other suppliers.
Canon’s limited warranty does not cover damage caused to...

Chapter 6 Maintenance6-13
Maintenance
Testing and Cleaning the BJ Cartridge Print Head
The print head in the BJ cartridge contains nozzles through which ink is propelled 
onto the paper. To maintain the best possible print quality, these nozzles need to be 
cleaned from time to time. Your MultiPASS is equipped with a print head cleaning 
function that does this.
Printing the Nozzle Check
Before cleaning the print head, you may want to print the nozzle check to test the 
BJ cartridge installed in the...

6-14Maintenance Chapter 6
Cleaning the BJ Cartridge Print Head
If your printouts become faint or streaked, or if their quality otherwise decreases, 
clean the print head. To maintain the best possible print quality, you need to clean 
the BJ cartridge print head from time to time.
1. Press 
Function.
2. Press 
Cleaning.
3. Use 
d or u to select HEAD CLEANING.
4. Press 
Set.
❑The MultiPASS cleans the print head.
When cleaning ends, the MultiPASS returns to standby mode.
You can perform the cleaning...

Chapter 6 Maintenance6-15
Maintenance
When to Replace the BJ Cartridge
How frequently you need to replace your BJ cartridge or one of its BJ tanks 
depends on how you use your MultiPASS. If you print a good deal of graphics, 
halftones, or grayscales, you will need to replace the BJ cartridge more often than if 
you print mainly text. (See page A-5 for details on the life expectancy of BJ 
cartridges.)
To help ensure the maximum life for your cartridges, always follow the guidelines 
for cartridge...

6-16Maintenance Chapter 6
Replacing the BJ Cartridge
1. Make sure the MultiPASS is plugged in.
2. Open the document tray.
3. Open the printer cover by grasping the document guides and lifting.
❑If the printer cover does not open easily, slide the document guides 
outward and then open the printer cover.
For optimum printing results, Canon recommends that you use the Canon 
BC-21e Color BJ Cartridge or the optional Canon BC-20 Black Cartridge 
with your MultiPASS.
When replacing BJ tanks in the BC-21e...

Chapter 6 Maintenance6-17
Maintenance
4. Press the cartridge button  .
❑The cartridge holder moves to the center of the unit.  Do not touch the round shaft, guide rail, or ribbon cable. Touching these parts 
may adversely affect operation of the unit and /or cause print quality 
deterioration.
Do not try to manually move or stop the cartridge holder as this may 
damage the MultiPASS.
The MultiPASS includes an automatic protection feature that helps keep it 
from overheating. If the cartridge holder...

6-18Maintenance Chapter 6
5. Raise the blue cartridge lock lever (on the cartridge holder) by gently pulling 
up on it.
6. Remove and dispose of the old BJ cartridge, or store it in the Ink Cartridge 
Storage Box. Hold the BJ cartridge by its sides only. Do not touch the print head, the sharp 
edges around the print head, the silver plate on the bottom of the BJ cartridge, 
or the silver metal or circuit area on its side.
c
PRINT HEAD
DO NOT TOUCH
Ink
CartridgeBCl-21Made  in
JapanB
la
ckInk...

Chapter 6 Maintenance6-19
Maintenance
7. Peel the cover off the new BJ cartridge’s protective packaging, and remove the 
BJ cartridge.
8. Lift the orange cap off the BJ cartridge’s print head, then remove the orange 
tape.  Hold the BJ cartridge by its sides only. Do not touch the print head, the 
sharp edges around the print head, the silver plate on the bottom of the 
BJ cartridge, or the silver metal or circuit area on its side.
c
PRINT HEAD
DO NOT TOUCH
HOLD HERE
TAPE CAP 

6-20Maintenance Chapter 6
9. Hold the BJ cartridge so that its label faces outward, then slide it into the 
cartridge holder.
❑Be careful not to touch the silver plate on the bottom of the BJ cartridge or 
the silver metal or circuit area on its side.
10. Lower the blue cartridge lock lever completely. 
❑Do not use excessive force.
❑The BJ cartridge is now locked into position.
Spilled ink can stain any surface; protect yourself and your work area.
Discard the cap and tape immediately. Never attempt to...

Chapter 6 Maintenance6-21
Maintenance
11. Press the cartridge button  . 
❑The cartridge holder moves to its home position on the right side of the 
unit and begins cleaning the print head. This process takes about 55 
seconds.
12. Close the printer cover.
13. Close the document tray. Do not try to manually move or stop the cartridge holder as this may damage 
the MultiPASS.
Unplug the MultiPASS only when it is in standby mode (date and Receive mode 
shown in the LCD display), and the cartridge holder is...