Brother Printers Mfc 7750 Laser 600x600dpi Super G3 Fax Owners Manual

47SETUP RECEIVE
Setting Up Sequential Polling Receive
Your MFC can request documents from several fax units in a single
operation. Afterward, a Sequential Polling Report will be printed.
1  Press Function, 1, 2, 8.
The screen displays
POLLING RX:OFF?
SELECT  & SET
2Press  or  to select Polling ON.
    
POLLING RX:ON?
3Press Set. The screen prompts you to enter the fax numbers to be polled.
PRESS START KEY
ONLINEENTER FAX NO.
ONLINE
4Specify the destination fax machines you wish to poll, using
One...

48CHAPTER FIVE
Canceling a Scheduled Job
You can cancel tasks youÕve scheduled, such as Delayed Fax or Polling
Transmit.
If the MFC is idle,
1Press Function, 1, 4.  Any waiting jobs will appear on the display. If
no jobs are waiting, the screen displays NO JOB WAITING.
    
4.REMAINING JOBS
2If you have more than two jobs waiting, use  or  to select the job
you want to cancel. Press 
Set when the screen displays your selection.
ÑORÑ
If you have only one job waiting, go to step 3.
3Press 1 to...

49SETUP RECEIVE
Setting Multi-Function Link Pro Mode
(For MFC 4650, MFC 6650MC and MFC 7750 Only)
If you connect your MFC to your PC, you can receive faxes into your PC.
After completing all setup for Multi-Function Link Pro mode, you can turn
on Multi-Function Link Pro to reroute incoming faxes to your PC.
1Press  Function, 1, 2, 0.
The screen displays
0.MF LINK
2Press  or  to select ON (or OFF).
3Press Set when the screen displays your selection.
4Press Stop to exit.
Distinctive Ringing
This MFC...

50CHAPTER FIVE
Registering your Distinctive Ringing Pattern
If you are not sure which ring pattern you have, call your telephone
company. Then assign that pattern in the steps below.
1Disconnect the MFC from any TAD or telephone company Voice Mail.
2Set the MFC to MANUAL mode.
3Press Function, 1, 0, 1.
The screen displays the current setting of this feature.
4Press  or  to select the SET Mode.
5Press Set when the screen displays DISTINCTIVE:SET?
6Press  or  to select the prestored ring pattern you want...

51SETUP RECEIVE
Caller ID
The Caller ID feature of this MFC lets you use the Caller ID subscriber
service offered by many local phone companies.   This service provides
you, by means of the screen display,  the name or telephone number of your
caller as the line rings.
After a few rings, the screen displays the telephone number of your caller
(or name, if available).  Once you pick up the  handset, the Caller ID
information disappears from the screen, but the call information remains
stored in the Caller...

52CHAPTER FIVE
Printing Caller ID List
1Press Function, 1, 0, 2.
2Press  or  to select PRINT REPORT.
3Press Set.
4Press Start.
Clearing a Caller ID Stored in Memory
For effective use of the memory, it is recommended that you clear the
Caller ID stored in memory by pressing 
Clear when the display shows the
number or name.
Call Waiting Caller ID
(For MFC 4350, MFC 4650 and MFC 6650MC)
The Call Waiting Caller ID feature lets you use the Call Waiting Caller ID
service offered by many local telephone...

53
Before You  Begin
nDocuments must be between 5.8 and 8.5 inches wide, and 3.9 and 14.1
inches long. Your MFC can scan an image only 8.2 inches wide,
regardless of how wide the paper is.
nMake sure you insert documents face down, top edge first.
nAdjust the paper guides to fit the width of your document.
 
nThe MFC 4350, MFC 4650 and MFC 6650MCÕs automatic document
feeder (ADF) can hold up to 20 pages, feeding each one individually
through the MFC. Use standard (14 lbÐ24 lb) paper when using the
ADF;...

54CHAPTER SIX
The FAX 7750Õs automatic document feeder (ADF) can hold up to 30
pages if you stagger the pages and meet the following conditions:
Temperature: 68°F Ð 86°F (20°C Ð 30°C)
Humidity: 50% Ð 70%
Paper: Xerox 4200 (20LB/LTR),
Xerox 4024 (24LB/LTR),
Fan the paper, then stagger the pages in the document feeder as shown
below:
nPress Resolution (before you send the fax) to select the resolution for the
document youÕre sending.
nDO NOT use curled, wrinkled, folded or ripped paper, or paper with...

55SETUP SEND
Manual Transmission
Manual transmission lets you hear the dial tone, ringing and fax receiving
tones before sending the fax.
1Insert the document face down in the feeder.
2Pick up the handset and listen for a dial tone
ÑORÑpress 
Hook and listen for a dial tone.
3Enter the fax number you want to call (you can enter the digits using
the dial pad, or you can enter a One Touch or Speed Dial number or you
can call from the Tel-index).
4When you hear the fax tone, press Start.
5If youÕre using...

56CHAPTER SIX
Dual Access
You can scan up to 50 documents into the fax memory, even while the MFC
is receiving or sending another fax (from memory). You can set temporary
settings for each fax youre scanning, except Timer and Polling.
If you try to scan in and store a 51st fax, the MFC will send it immediately,
without storing it in memory.
If you get a MEMORY FULL message while scanning the first page of a
fax, press 
Stop to cancel scanning.  If you get a MEMORY FULL message
while scanning in a...