Brother Printers Mfc 7750 Laser 600x600dpi Super G3 Fax Owners Manual

27ON-SCREEN PROGRAMMING
2. SETUP RECEIVE
Function Description Factory Set More Info
1. RING DELAYNumber of rings before MFCRING DELAY: 04 p.  4 0
answers in FAX, FAX/TEL, or
MC mode.
TOLL SAVER:OFF p. 101
(MFC 6650MC Only)
2. F/T RING TIMESets the time for Òdouble ringÓ in 20 p. 41
FAX/TEL mode.
3. EASY RECEIVEReceive fax messages without O N p. 42
pressing the Start key.
4. REMOTE CODEEnter code to activate or deactivate ON (
51, #51) p. 45
machine from a remote location.
5. REDUCTIONReduces size of...

28CHAPTER THREE
6.  SET AUTO DIAL
Function Description Factory Set More Info
1. ONE-TOUCH DIALDial numbers stored in memory Ñ p. 71
by pressing only one key.
2. SPEED-DIALDial numbers stored in memory Ñ p. 72
by pressing only three keys.
3. SETUP GROUPSSet up a Group number for Ñ pp. 73, 74
broadcasting.
1. Fax Functions (CONTINUED)
5. INTERRUPT
Function Description Factory Set More Info
Interrupting a pollingSend a fax now, even if you have theÑp. 70
or transmit job
machine set to send a fax later, or...

29ON-SCREEN PROGRAMMING
0. TEL  SERVICE
Function Description Factory Set More Info
1. DISTINCTIVEUse with telephone companyÕsOFF p. 49
distinctive ringing service to register
the ring pattern on the MFC.
2. CALLER IDView or print a list of the last 30 Ñ p. 51
Caller IDs stored in memory.
1. Fax Functions (CONTINUED)
8.  SETUP  MSG  CENTER (For MFC 6650MC Only)
Function Description Factory Set More Info
1. MSG STORAGESet up memory to store fax or FAX: OFF p. 95
voice messages, or both. VOICE: ON
2. BACKUP...

30CHAPTER THREE
1.  PRINT OPTIONS
Function Description Factory Set More Info
1. INTERNAL FONTYou can print resident fonts to Ñ p. 177
check and confirm font types
2. CONFIGURATIONPrinter settings and status are Ñ p. 177
listed here.
2. Printer Functions
2. RESET PRINTER
Function Description Factory Set More Info
1. FACTORY SETYou can restore the printer back Ñ p. 178
to the factory default settings.
2. HEX DUMP MODE
If you set HEX DUMP MODE, allÑ p. 178
the PC data is printed in
hexadecimal. 

31
Getting Started
Setting Dialing Mode (Tone/Pulse)
Your MFC comes set to accommodate tone (multi-frequency) dialing service. If
you have pulse (rotary) dialing service, you need to change the dialing
mode.
1Press  Function, 1, 1, 1.
The screen prompts you to select TONE or PULSE.
DIALING:TONE?
DIALING:PULSE?
2Use  or  to select dialing mode.
3Press Set when the screen displays the dialing mode you want.
4Press Stop to exit.
4
CHAPTER FOUR
Initial Setup 

32CHAPTER FOUR
Setting Date and Time
Your MFC displays the date and time, and prints it on every fax you send.
In the event of a power failure, you may have to reset the date and time. All
other settings remain unaffected.
1Press Function, 1, 1, 2.
The screen prompts you to enter the year.
ENTER YEAR:XX
2Enter the last two digits of the year. The screen displays your entry.
3Press Set. The screen prompts you to enter the month.
ENTER MONTH:XX
4Enter two digits for the month (for example, enter 09 for...

33INITIAL SETUP
Setting Station ID
You can store your name, fax number, and telephone number to be printed
on all fax pages you send.
1Press Function, 1, 1, 3.
The screen prompts you to enter your fax number.
FAX:
2Enter your fax number (up to 20 digits). The screen displays your entry.
3Press Set. The screen prompts you to enter your telephone number.
TEL:
4Enter your telephone number (up to 20 digits). If your telephone
number and fax number are the same, enter the same number again. The
screen...

34CHAPTER FOUR
Entering Text
When you are setting certain functions, such as the Station ID, you may
need to enter text into the MFC. Most keys on the dial pad have three or
four letters printed above them. The keys for 0, # and 
 donÕt have printed
letters because they are used for special characters.
By pressing the appropriate number on the dial pad the correct number of
times, you can access the character you want.
Key once twice three times four times five times
2ABC 2 A
3DE F 3D
4GH I 4 G
5JKL5 J...

35INITIAL SETUP
Repeating letters
If you need to enter a character assigned to the same key as the previous
character, press 
 to move the cursor to the right.
Special characters and symbols
Press  for (space) ! Ò # $ % & Õ ( ) * + , - . /
Press  #  for : ; < = > ? @ [ ] ^ _
Press  ¯  for ƒ Ë é æ ë ‚ è … 0
NOTICE
The Telephone Consumer Protection Act of 1991 makes it
unlawful for any person to use a computer or electronic device
to send any message via a telephone fax machine unless such
messages clearly...

36CHAPTER FOUR
Setting Beeper Volume
You can set the beeper to LOW, HIGH or OFF. The default setting is LOW.
When the beeper is set to LOW or HIGH, the MFC beeps every time you
press a key or make an error, and at the end of fax sending or receiving.
1Press Function, 1, 1, 4.
2Press  or  to select your setting.
3When the screen displays the setting you want, press Set.
4Press Stop to exit.
Setting the Handset Volume
You can adjust the handset volume any time you are talking on the
telephone. There are...