Brother Printers Intellifax 4750 Plain Paper 4mb 14 4k Owners Manual
Have a look at the manual Brother Printers Intellifax 4750 Plain Paper 4mb 14 4k Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 331 Brother manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
12 - 3SETUP BROTHER MACHINE WITH PC Connecting Brother Machine to PC with a USB Cable (For Using Windows¨ 98 Only) A USB cable is not included with your MFC 8300. Before you can set up the USB interface, please purchase a standard USB cable. Or, to set up the parallel interface instead, please see ÒConnecting Brother Machine to PC with Bundled Parallel CableÓ on page 12-9. 1After you have set up the MFC and checked that it is working properly, make sure the MFC is turned on and the PC is turned off. 2Connect the USB cable to both the MFC and PC. 3Turn on your PC. The Add New Hardware Wizard appears. Click Next.
12 - 4SETUP BROTHER MACHINE WITH PC 4Select [Recommended] and click Next. Installing Brother Printer Driver Using USB Cable 1Insert the Printer driver CD-ROM. 2Select Specify a location and remove the other check marks, then click Browse to locate the file. 3Double-click on the CD icon and click on the Win98usb folder, then click OK.
12 - 5SETUP BROTHER MACHINE WITH PC 4Click Next. 5Select [Recommended] and click Next. 6Confirm the choice is Brother MFL Pro Printer II and click Next.
12 - 6SETUP BROTHER MACHINE WITH PC 7Select BRUSB: USB Printer Port and click Next. 8Type Brother MFL Pro Printer II as the name of printer and click Next. 9Select Ye s [Recommended] and click Finish.
12 - 7SETUP BROTHER MACHINE WITH PC 10After completing the test print, click Ye s. 11Click Finish. This completes the installation of the Printer and its USB driver.
12 - 8SETUP BROTHER MACHINE WITH PC Manually Installing True Type Fonts For the MFC 8300, you must install the True Type Fonts manually, following the steps bellow. For the MFC 8600 and MFC 8700, you can install the True Type Fonts during the initial Windows ¨ Printer Driver installation, or manually at a later time. True Type Fonts are the fonts that are used in the Windows ¨ operating systems. If you install the Brother True Type Fonts, more types of fonts will be available for Windows ¨ applications. For Windows¨ 95/98 and Windows NT¨ Workstation Version 4.0: 1Insert the Brother CD-ROM drive for True Type Fonts. 2Click on Start, then Settings, and select Control Panel. 3In the Control Panel window, double-click on the Fonts folder. 4In the Fonts window, select Install New Font... from the File menu. 5Select your CD-ROM drive and select the font folder. 6Select the fonts you want to install and click the OK button. For Windows¨ 3.1x: 1Insert the Brother CD-ROM for True Type Fonts. 2In the Program Manager, double-click the Main icon. 3In the Main window, double-click the Control Panel icon. 4In the Control Panel window, double-click the Fonts icon. 5In the Fonts window, click the Add... button. 6Select your CD-ROM drive. 7Select the fonts you want to install and click the OK button.
12 - 9SETUP BROTHER MACHINE WITH PC Connecting Brother Machine to PC With Bundled Parallel Cable You must connect the Brother machine to your PC with the included bi-directional IEEE-1284 compliant parallel cable. 1Make sure to unplug the machineÕs power cord from the electrical outlet before connecting the parallel interface cable. Also, make sure the PC is turned off and unplugged from the electrical power before you connect the interface cable. 2Connect the parallel interface cable to the parallel interface port of the machine and secure the connection with the wire clips. 3Connect the interface cable to the printer port of the PC and secure with the two screws. For the location of your computerÕs parallel printer port, see the UserÕs Guide for your PC. 4Before plugging in your PC and turning it on, plug in the electrical cord of the Brother machine. If you are using Windows¨ 95, after you connect Brother machine to PC. You may see ÒNew Hardware Found Brother MFCXXXXÓ during startup. You can select ÒDo not install a driver (Windows ¨ will not prompt you again).Ó and click OK, so Windows¨ will not display this dialog box again. ÑORÑ If you see ÒUpdate Device Driver WizardÓ, click Next to bypass the Windows ¨ Plug and Play Printer Driver screens, followed by Finish. If you are using Windows ¨ 98, you may see the ÒAdd New Hardware WizardÓ during startup, follow the instructions from the installer, then click Next. Click Finish when it appears on the screen.
12 - 10SETUP BROTHER MACHINE WITH PC Installing Brother Printer Driver (For Parallel Interface) (For Windows¨ 95/98 and Windows NT¨ Workstation Version 4.0 Only) 1Insert the Brother CD-ROM into your CD-ROM drive. 2Enter the command for your version of Windows¨, if needed. After you insert the Brother CD-ROM, you must type the appropriate command for your version of Windows ¨: If you are using Windows ¨ 95/98 or Windows NT¨ Workstation Version 4.0, the Software Installation program appears automatically when you insert the Brother CD-ROM. ÑORÑ You can also click Start at the Desktop, select Run and then enter x:\SETUP.EXE. (ÒxÓ is the drive letter for your CD-ROM drive.) If you are using Windows¨ 3.1x: nInsert the Brother CD-ROM for the MFC 8300 printer driver into your CD-ROM drive. nFrom the Program Manager, click on File, then Run. nEnter x:\SETUP. (ÒxÓ is the drive letter for your CD-ROM drive.) The Brother LOGO will be displayed on the screen. If you are using Windows NT¨ 3.51 or earlier, the following error message will appear on the screen: You are running Windows NT ¨ 3.51 or earlier. Brother MFL Pro does not support this version of Windows NT¨. YOU MUST UPGRADE TO WINDOWS NT 4.0 AND REINSTALL MFL Pro!! If you are using Windows NT¨ Workstation 4.0 and you are not logged-in as the Administrator, an error message will appear explaining the problem.
12 - 11SETUP BROTHER MACHINE WITH PC A window appears listing the options: For each application you install, click on that name in the Software Installation window and follow the instructions on the screen. The last step will be to restart Windows ¨ and access the Software Installation window again to install the next application. 3Click on ÒInstall MFC Printer DriverÓ and follow the prompts on the screen.