Brother MFC 9420CN User Manual
Have a look at the manual Brother MFC 9420CN User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 331 Brother manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Chapter D D - 3 Putting paper in the lower tray unit After you have installed the lower paper tray, you can put paper in it the same way you put paper in the upper paper tray. SO-DIMM (Memory) The memory board is installed on the main controller board inside the machine. When you add the optional memory board, it increases the performance for both copy and print operations. The machine has 64 MB of standard memory and a slot for optional additional memory. The memory can be expanded up to a total of 576 MB by installing a commercially available SO-DIMM (Dual In-line Memory Module). The machine uses memory modules that are: 144 pins, no-parity, SDRAM with 64 MB or more. The machine is not compatible with Extended Data Output (EDO) DIMM.The following SO-DIMM sizes can be installed: ■64 MB TechWorks 12345-0001 ■128 MB TechWorks 12462-0001 ■256 MB TechWorks 12485-0001 ■512 MB TechWorks 12475-0001 Note For more information, visit TechWorks web site at www.techworks.com In general, SO-DIMM must have the following specifications: Type: 144 pin and 64 bit output CAS latency: 2 or 3 Clock frequency: 100 MHz or more Capacity: 64 MB to 512 MB DRAM type: SDRAM ■The machine’s standard memory can vary depending on the machine model and the country. ■There might be some SO-DIMMs that will not work with this machine. ■For more information, call the dealer you bought the machine from or Brother Customer Service. ■For the latest information, visit the Brother Solutions Center at http://solutions.brother.com Improper Setup Do not put transparencies, labels or envelopes in the paper tray of the optional lower tray unit. This might cause paper jams.
Optional accessories D - 4 D Installing additional memory 1Turn off the machines power switch. 2Unplug first the telephone line cord from the telephone wall jack, and then unplug the power cord from the AC power outlet. 3Unscrew the screw holding the side cover, and then slide the side cover to remove it. 4Unscrew the screw holding the metal shield plate, and then remove the metal shield plate. 5Unpack the SO-DIMM and hold it by the edges. WARNING Make sure you turn the machine OFF and unplug the machine before you install or remove the SO-DIMM. Installing optional accessories without unplugging the machine could result in electric shock hazard. CAUTION SO-DIMM boards can be damaged by even a small amount of static electricity. Do not touch the memory chips or the board surface. Wear an antistatic wrist strap when you install or remove the board. If you do not have an antistatic wrist strap, keep touching the bare metal on the machine.
Chapter D D - 5 6Hold the SO-DIMM with your fingers on the side edges and your thumb on the back edge. Align the notch on the SO-DIMM with the protrusions with the SO-DIMM slot. (Check that the locks on each side of the DIMM slot are open or facing outwards.) 7Press the SO-DIMM straight into the slot (press firmly). Make sure the locks on each side of the SO-DIMM click into place. Note To remove the SO-DIMM, open the retaining clips on both sides of the SO-DIMM by pushing them outward, grasp both edges of the SO-DIMM and pull it out straight. 8Secure the metal plate with the screw. 9Put the side cover back on by sliding it into the guide rails, and then secure it with the screw. 0Reconnect the interface cable (machine cable) to your computer. Then, plug the machines power cord back into the AC power outlet first, and then plug in the telephone line cord. Turn on the machines power switch. Note To check that you have installed the SO-DIMM properly, you can print the User Settings listing that shows the current memory size. To print the User Settings listing, see How to print a report on page 9-2.
E - 1 E E Product description General Specifications Memory Capacity64 MB (expandable to 576 MB) ADF (automatic document feeder)Up to 35 pages Temperature: 68°F - 86°F (20°C - 30°C) Humidity: 50% - 70% Paper: 20 lb (80 g/m 2) Letter Paper Tray250 Sheets (20 lb (80 g/m 2)) Printer TypeLaser Print MethodElectrophotography by semiconductor laser beam scanning LCD (Liquid Crystal Display)16 characters x 2 lines Power Source120V AC 50/60Hz Power ConsumptionCopying: Average 615 W Sleep: Average 16 W Standby: Average 155 W Dimensions 19 in. (482 mm) 20.2 in. (512 mm) 21 in. (534 mm)
Chapter E E - 2 Print media WeightWithout OPC belt/Toner cartridges: 76.7 lb (34.8 kg) NoiseOperating: LWAd = 6.7 bels or less Standby: LWAd = 5.4 bels or less TemperatureOperating: 50°F - 90.5°F (10 - 32.5°C) Storage: 32°F - 104°F (0 - 40°C) HumidityOperating: 20 to 80% (without condensation) Storage: 10 to 90% (without condensation) Paper Input Paper Tray ■Paper type: Thin, Plain, Thick, Thicker, Recycled paper or Transparencies1 ■Paper size: Letter/A4, Legal, Executive, A5, B5, COM10 and DL For more details, see Acceptable paper and other media on page 2-1. ■Paper Weight: 16 - 55 lb (60 - 210 g/m2) 17 - 24 lb (64 - 90 g/m2) for ADF Maximum paper tray capacity: Up to 250 sheets of 20 lb (80 g/m2) plain paper or up to 50 transparencies Paper OutputUp to 250 sheets of Letter/A4 size plain paper 2 (Face down print delivery to the output paper tray) 1For transparencies and labels, we recommend removing printed pages from the output paper tray immediately after they exit the machine to avoid the possibility of smudging. 2Based on the Recommended paper on page 2-1. The number of pages will vary depending on the paper being used. Some paper can not be stacked up to 250 sheets.
Specifications E - 3 E Fax CompatibilityITU-T Group 3 Coding SystemMH/MR/MMR/JPEG Modem SpeedAutomatic Fallback: 33600 bps Document SizeADF Width: 5.8 to 8.5 in. (147.3 to 215.9 mm) ADF Height: 5.8 to 14 in. (147.3 to 356 mm) Scanner Glass Width: Max. 8.5 in. (215.9 mm) Scanner Glass Height: Max. 11.7 in. (297 mm) Scanning WidthMax. 8.2 in. (208 mm) Printing WidthMax. 8.2 in. (208 mm) Gray Scale256 levels Polling Types Standard, Sequential Contrast ControlAutomatic/Light/Dark (manual setting) Resolution Horizontal 203 dot/inch (8 dot/mm) Vertical Standard - 98 line/inch (3.85 line/mm) (Black) 196 line/inch (7.7 line/mm) (Color) Fine - 196 line/inch (7.7 line/mm) (Black) 196 line/inch (7.7 line/mm) (Color) Photo - 196 line/inch (7.7 line/mm) (Black) Superfine - 392 line/inch (15.4 line/mm) (Black) One-Touch Dial16 (8 x 2) Speed-Dial200 stations Broadcasting266 stations Automatic Redial1 time after 5 minutes Auto Answer0, 1, 2, 3 or 4 rings Communication SourcePublic switched telephone network. Memory TransmissionUp to 500 1 /4002 pages Out of Paper ReceptionUp to 500 1 /4002 pages 1“Pages” refers to the “Brother Standard Chart No. 1” (a typical business letter, Standard resolution, MMR code). Specifications and printed materials are subject to change without prior notice. 2“Pages” refers to the ITU-T Test Chart #1 (a typical business letter, Standard resolution, MMR code). Specifications and printed materials are subject to change without prior notice.
Chapter E E - 4 Copier Color/BlackColor/Black Document Size ADF Width: 5.8 to 8.5 in. (147.3 to 215.9 mm) ADF Height: 5.8 to 14 in. (147.3 to 356 mm) Scanner Glass Width: Max. 8.5 in. (215.9 mm) Scanner Glass Height: Max. 11.7 in. (297 mm) Copy SpeedColor Up to 8 pages/minute (Letter/A4 paper) 1 Black Up to 31 pages/minute (Letter/A4 paper)1 First CopyApprox. 20 seconds (Black) Approx. 30 seconds (Color) Multiple CopiesStacks or Sorts up to 99 pages Reduce/Enlarge25% to 400% (in increments of 1%) ResolutionScan: Up to 600 x 300 dpi Print: Up to 600 x 600 dpi 1Does not include the warm up time for the 1st printed page. Based on Brother standard pattern. (Stack Copy) Copy speeds vary with the complexity of the document.
Specifications E - 5 E Scanner Color/BlackColor/Black TWAIN CompliantYes (Windows ® 98/98SE/Me/2000 Professional/XP/Windows NT® Workstation Version 4.0) Mac OS ® 9.1 - 9.2/Mac OS® X 10.2.4 or greater WIA CompliantYes (Windows ® XP)1 Color Depth48 bit color processing (Input) 24 bit color processing (Output) ResolutionUp to 9600 x 9600 dpi (interpolated) Scanner glass: Up to 1200 x 2400 dpi (optical) ADF: Up to 1200 x 600 dpi (optical) Document Size ADF Width: 5.8 to 8.5 in. (147.3 to 215.9 mm) ADF Height: 5.8 to 14 in. (147.3 to 356 mm) Scanner Glass Width: Max. 8.5 in. (215.9 mm) Scanner Glass Height: Max. 11.7 in. (297 mm) Scanning WidthMax. 8.5 in. (215.9 mm) Gray Scale256 levels 1Maximum 1200 x 1200 dpi scanning with Windows® XP (resolution up to 9600 x 9600 dpi can be selected by using the Brother scanner utility)
Chapter E E - 6 Printer Interfaces EmulationsBrother Printing System for Windows® PCL6 BR-Script 3 (PostScript® 3™ Emulation) Printer DriverWindows ® 98/98SE/Me/2000 Professional/XP/Windows NT® Workstation Version 4.0 driver supporting Brother Native Compression mode and bi-directional capability Brother Color Driver for Mac OS ® 9.1 - 9.2/Mac OS® X 10.2.4 or greater Resolution600 x 600 dpi (Max. 2400 dpi class) Print QualityNormal printing mode Economy printing mode (Toner Save mode) Print SpeedUp to 31 pages/minute (Letter/A4 size) (Black) 1 Up to 8 pages/minute (Letter/A4 size) (Color)1 First PrintAverage 13 seconds (Black) Average 19 seconds (Color) 1Based on Brother standard pattern. Does not include the warm up time for the 1st printed page. Interface Recommended Cable Parallel A bi-directional shielded parallel cable that is IEEE 1284 compliant and no longer than 6 feet (2.0 m). USBA USB 2.0 cable that is no longer than 6 feet (2.0 m). Your machine has a High-Speed USB 2.0 interface. The machine can also be connected to a computer that has a USB 1.1 interface. LAN cableEthernet UTP cable category 5 or greater. (Cables are not included.)
Specifications E - 7 E Computer requirements Minimum System Requirements and Supported PC Software Functions Computer Platform & Operating System VersionSupported PC Software FunctionsPC InterfaceMinimum ProcessorMinimum RAMRe comme nde d RAM Available Hard Disk Space for Drivers for Applications Windows® Operating System98, 98SE Printing, Scanning1, PC Fax2,4 USB, Parallel, Ethernet Pentium ®II or equivalent32 MB 128 MB 90 MB 130 MB MeUSB, Parallel, Ethernet NT® Workstation 4.0Parallel, Ethernet 64 MB 256 MB 2000 ProfessionalUSB, Parallel, Ethernet XP Home XP ProfessionalUSB, Parallel, Ethernet128 MB 256 MB 150 MB 220 MB XP Professional x64 Edition (Dow nload from http://s olutions.brother.com) USB, Parallel, EthernetAMD Opteron ™ AMD Athlon™ 64 Intel® Xeon™ with Intel® EM64T Intel® Pentium®4 with Intel® EM64T256 MB 512 MB 150 MB 220 MB Macintosh ® Operating SystemOS 9.1 - 9.2Printing, Scanning 1,3, PC Fax send4USB, EthernetAll base models meet minimum requirements.64 MB 80 MB 200 MB OSX 10.2.4 or greaterPrinting, Scanning, PC Fax send 4USB, Ethernet128 MB 160 MB 1Network Scanning not supported in Windows NT® Workstation 4.0 and Mac OS® 9.1 - 9.2.2PC Fax send only for network users.3Dedicated Scan to key not available for Mac OS® 9.1 - 9.2.4PC Fax supports black & white faxing only.For the latest driver updates, access the Brother Solutions Center at http://solutions.brother.com All registered trademarks referenced herein are the property of their respective companies.