Brother MFC 9320CW User Manual

Loading paper and documents19
2
Handling and using special 
paper2
The machine is designed to work well with 
most types of xerographic and bond paper. 
However, some paper variables may have an 
effect on print quality or handling reliability. 
Always test samples of paper before 
purchasing to ensure desirable performance. 
Store paper in its original packaging and keep 
it sealed. Keep the paper flat and away from 
moisture, direct sunlight and heat.
Some important guidelines when selecting 
paper...

Chapter 2
20
Envelopes2
Most envelopes will be suitable for your 
machine. However, some envelopes may 
have feed and print-quality problems 
because of the way they have been made. A 
suitable envelope should have edges with 
straight, well-creased folds and the leading 
edge should not be thicker than two sheets of 
paper. The envelope should lie flat and not be 
of baggy or flimsy construction. You should 
buy quality envelopes from a supplier who 
understands that you will be using the 
envelopes in...

Loading paper and documents21
2
• with sealing flaps that have not been folded at purchase
• with sealing flaps as shown below
 
• with each side folded as shown below
 
If you use any of the types of envelopes 
listed above, they may damage your 
machine. This damage may not be 
covered under any Brother warranty or 
service agreement.
Occasionally you may experience paper 
feed problems caused by the thickness, 
size and flap shape of the envelopes you 
are using.
 
Labels2
The machine will print on...

Chapter 2
22
Loading documents2
Using the automatic 
document feeder (ADF)2
The ADF can hold up to 35 pages and feeds 
each sheet individually. Use standard 
80 g/m
2 paper and always fan the pages 
before putting them in the ADF.
Recommended environment2
IMPORTANT
• DO NOT leave thick documents on the  scanner glass. If you do this, the ADF may 
jam.
• DO NOT use paper that is curled,  wrinkled, folded, ripped, stapled, paper-
clipped, pasted or taped.
• DO NOT use cardboard, newspaper or  fabric.
• To...

Loading paper and documents23
2
Using the scanner glass2
You can use the scanner glass to fax, copy or 
scan pages of a book one page at a time.
Documents can be up to 215.9 mm wide and 
297 mm long.
Note
To use the scanner glass, the ADF must 
be empty.
 
aLift the document cover.
bUsing the document guidelines on the 
left and top, place the document face 
down in the upper left corner of the 
scanner glass.
 
 
cClose the document cover.
IMPORTANT
If the document is a book or is thick do not 
slam...

24
3
Mode Timer3
The machine has three mode keys on the 
control panel: Fax, Scan , and  Copy. 
You can set how much time the machine 
takes after the last Copy or Scan operation to 
return to Fax mode. If you choose  Off, the 
machine will stay in the mode you used last. 
This setting also sets the time the machine 
will change from individual user to the Public 
mode when using Secure Function Lock. 
(See  Switching Users  on page 31.)
 
aPress Menu, 1, 1.
bPress  a or  b to choose  0 Sec, 
30 Secs ,...

General Setup25
3
Volume settings3
Ring volume3
You can choose a range of ring volume 
levels, from High to Off .
While in Fax mode press   or   to adjust 
the volume level. The LCD will show the 
current setting, and each key press will 
change the volume to the next level. The 
machine will keep the new setting until you 
change it.
You can also change the ring volume through 
the menu:
aPress  Menu, 1, 3,  1.
bPress  a or  b to choose  Off, Low , Med  or 
High .
Press  OK.
cPress  Stop/Exit .
Beeper...

Chapter 3
26
Automatic daylight 
savings time
3
You can set the machine to change 
automatically for Daylight Savings Time. It 
will set itself forward one hour in the Spring, 
and back one hour in the Autumn.
aPress  Menu, 1, 4.
bPress  a or  b to choose  On or  Off .
Press  OK.
cPress  Stop/Exit .
Ecology features3
Toner Save3
You can save toner using this feature. When 
you set Toner Save to  On, prints appear 
lighter. The default setting is  Off.
a Press  Menu, 1,  5, 1.
bPress  a or  b to choose...

General Setup27
3
Sleep Time3
The Sleep Time setting can reduce power 
consumption by turning off the fuser while the 
machine is idle.
You can choose how long the machine must 
be idle before it goes into sleep mode. When 
the machine receives a fax, computer data, or 
makes a copy, the timer will be reset. The 
default setting is 005 minutes.
While the machine is in sleep mode the LCD 
will display Sleep. When printing or copying 
in sleep mode, there will be a short delay 
while the fuser warms up....

28
4
Secure Function Lock 2.0 
(MFC-9320CW only)
4
Secure Function Lock lets you restrict Public 
access to the following machine functions:„ Fax Tx
„ Fax Rx
„ Copy
„ Scan
„ USB Direct
„ PC Print
„ Color Print
This feature also prevents users from 
changing the Default settings of the machine 
by limiting access to the Menu settings.
Before using the security features you must 
first enter an administrator password.
Access to restricted operations can be 
enabled by creating a restricted user....