Brother MFC 9320CW User Manual

Printing photos from a digital camera (MFC-9320CW only)89
13
aPress Menu, 5, 3. 
USB Direct I/F
3.PictBridge
bTo set the PictBridge settings, press  a or 
b  to choose  1.Paper Size , 
2.Orientation , 3.Date & Time , 
4.File Name , or 5.Print Quality .
Press OK.
cPress  a or  b to choose an option for 
each menu setting.
Press OK.
Repeat  b to  c for each PictBridge 
setting.
dPress  Stop/Exit .
Note
• Camera settings are prioritized as long as 
your camera is not set to use your 
machine’s settings...

Chapter 13
90
IMPORTANT
• To prevent damage to your machine, do  not connect any device other than a digital 
camera or USB flash memory drive to the 
USB direct interface.
• DO NOT remove the digital camera from  the USB direct interface until the machine 
has finished printing.
 
DPOF printing13
DPOF stands for Digital Print Order Format.
Major digital camera manufacturers (Canon 
Inc., Eastman Kodak Company, FUJIFILM 
Corporation, Panasonic Corporation and 
Sony Corporation) created this standard to...

Printing photos from a digital camera (MFC-9320CW only)91
13
dEnter the password. Press OK. 
Change ID
PIN:XXXX
Note
If your ID has restricted options, the 
following messages appear on the LCD.
 
eThe LCD shows the following message 
depending on which mode the machine 
is in:
 
04/20 15:30 Fax
Camera Connected
 
Scan:Select ab
Camera Connected
 
Stack Copies:01
Camera Connected
fSet your camera to print an image. Set 
the number of copies if you are asked.
When the machine starts printing an 
image,...

Chapter 13
92
Connecting a camera 
as a storage device
13
Even if your camera is not in PictBridge 
mode, or does not support PictBridge, you 
can connect your camera as a normal 
storage device. This enables you to print 
photos from your camera.
Follow the steps in  Printing data directly from 
the USB Flash memory drive (MFC-9320CW 
only)  on page 94.
(If you would like to print photos in PictBridge 
mode, see  Setting your digital camera  
on page 88.)
Note
The name of the storage mode and...

93
14
14
With the Direct Print feature, you do not need 
a computer to print data. You can print by just 
plugging your USB Flash memory drive into 
the machine’s USB direct interface. 
Note
Some USB Flash memory drives may not 
work with the machine.
 
Supported file formats14
Direct Print supports the following file 
formats:„ PDF version 1.7
1
„JPEG
„ Exif + JPEG
„ PRN (created by Brother driver)
„ TIFF (scanned by all MFC or DCP Brother 
models)
„ PostScript
® 3™ (created by the Brother 
BRScript3...

Chapter 14
94
Printing data directly 
from the USB Flash 
memory drive 
(MFC-9320CW only)
14
aConnect your USB Flash memory drive 
to the USB direct interface (1) on the 
front of the machine.
The  Direct  key will light up. Press 
Direct . Your machine will enter Direct 
Print Mode.
 
bPress  a or  b to choose the folder name 
or file name you want to print.
Press  OK.
If you have chosen the folder name, 
press  a or  b to choose the file name you 
want to print.
Press  OK.
 
Direct Print
1.FILE_1.PDF...

Printing data from a USB Flash memory drive (MFC-9320CW only)95
14
fPress Mono Start  or Colour Start  to 
print the data.
IMPORTANT
• To prevent damage to your machine, DO  NOT connect any device other than a 
digital camera or USB Flash memory drive 
to the USB direct interface.
• DO NOT remove the USB Flash memory  drive or digital camera from the USB direct 
interface until the machine has finished 
printing.
 
Note
You can change the default settings for 
Direct Print by using the control panel...

Chapter 14
96
dEnter the password. Press  OK. 
Change ID
PIN:XXXX
Note
If your ID has the restricted options, the 
following messages appear on the LCD.
 
eThe file names appear if the password is 
correct.
Press  a or  b to choose the folder name 
or file name you want to print.
Press  OK.
If you have chosen the folder name, 
press  a or  b to choose the file name you 
want to print.
Press  OK.
 
Direct Print
1.FILE_1.PDF
Note
• If you want to print an index of the files, 
choose  Index Print , and...

Printing data from a USB Flash memory drive (MFC-9320CW only)97
14
hPress the dial pad key to enter the 
number of copies you want.
Press OK.
 
Copies
=1
iPress  Mono Start  or Colour Start  to 
print the data.
IMPORTANT
DO NOT remove the USB flash memory 
from the USB direct interface until the 
printer has finished printing.
 
Understanding the 
error messages
14
Once you are familiar with the types of errors 
that can occur while you print data from the 
USB Flash memory drive with Direct Print, 
you...

Chapter 14
98