Brother Mfc 8370dn User Manual

							170
5.USB Direct I/F
(continued)
1.Direct Print
(continued)8.Index Print Simple*
DetailsSets the index print 
option, simple format or 
details.89
2.Scan to USB1.Resolution Color 100 dpi*
Color 200 dpi
Color 300 dpi
Color 600 dpi
Gray 100 dpi
Gray 200 dpi
Gray 300 dpi
B&W 200 dpi
B&W 200x100 dpiSets the resolution to 
send the scanned data to 
USB Flash memory drive.See 
Software 
User’s 
Guide 
on 
the 
CD-ROM.
2.File Name— Enter the file name of the 
scanned data.
6.Print Reports1.XMIT Verify1.View on LCD— Prints a Transmission 
Verification Report for 
your last transmission.75
2.Print Report—
2.Help List— — Prints the Help List so you 
can see at-a-glance how 
to quickly program your 
machine.75
3.Tel Index List1.Numeric— Lists name and numbers 
stored in the One-Touch 
and Speed-Dial memory, 
in numerical or 
alphabetical order.75
2.Alphabetic—
4.Fax Journal— — Lists information about 
your last 200 incoming 
and outgoing faxes. (TX 
means Transmit. RX 
means Receive.)75
5.User Settings— — Lists your settings. 75
6.Network Config— — Lists your Network 
settings.75
7.Order Form— — You can print an 
accessories order form to 
fill out and send to your 
Brother dealer.75 Main Menu Submenu Menu Selections Options Descriptions Page
 
						

							Menu and features
171
D
Main 
MenuSubmenu Menu Selections Options Descriptions Page
7.Network1.TCP/IP1.Boot Method—Auto*
Static
RARP
BOOTP
DHCPChooses the BOOT 
method that best 
suits your needs.See 
Network 
User’s 
Guide 
on 
the 
CD-ROM.
2.IP Address— [000-255]. [000-255]. 
[000-255]. [000-255]Enter the IP address.
3.Subnet Mask— [000-255]. [000-255]. 
[000-255]. [000-255]Enter the Subnet 
mask.
4.Gateway— [000-255]. [000-255]. 
[000-255]. [000-255]Enter the Gateway 
address.
5.Node Name—BRNXXXXXXXXXXXXEnter the Node 
name.
6.WINS Config—Auto*
StaticChooses the WINS 
configuration mode.
7.WINS Server—(Primary)
[000-255]. [000-255]. 
[000-255]. [000-255]
(Secondary)
[000-255]. [000-255]. 
[000-255]. [000-255]Specifies the IP 
address of the 
primary or secondary 
WINS server.
8.DNS Server—(Primary)
[000-255]. [000-255]. 
[000-255]. [000-255]
(Secondary)
[000-255]. [000-255]. 
[000-255]. [000-255]Specifies the IP 
address of the 
primary or secondary 
DNS server.
9.APIPA—On*
OffAutomatically 
allocates the IP 
address from the 
link-local address 
range.
0.IPv6—On
Off*Enable or Disable the 
IPv6 protocol. If you 
want to use the IPv6 
protocol, visit 
http://solutions.brother.com/ for more information.
2.Ethernet——Auto*
100B-FD
100B-HD
10B-FD
10B-HDChoose the Ethernet 
link mode.
 
						

							172
7.Network
(continued)
3.Scan To FTP——Color 100 dpi*
Color 200 dpi
Color 300 dpi
Color 600 dpi
Gray 100 dpi
Gray 200 dpi
Gray 300 dpi
B&W 200 dpi
B&W 200x100 dpiChooses the file 
format to send the 
scanned data via 
FTP.See 
Network 
User’s 
Guide 
on 
the 
CD-ROM.
4.ScanTo Network——Color 100 dpi*
Color 200 dpi
Color 300 dpi
Color 600 dpi
Gray 100 dpi
Gray 200 dpi
Gray 300 dpi
B&W 200 dpi
B&W 200x100 dpiYou can scan a black 
and white or colour 
document directly to 
a CIFS server on 
your local network or 
on the internet.
5.Time Zone——UTCXXX:XXSets the time zone 
for your country.
0.Network Reset1.Reset1.Yes
2.No— Restore all network 
settings to factory 
default.
2.Exit—— Main 
MenuSubmenu Menu Selections Options Descriptions Page
 
						

							Menu and features
173
D
Main Menu Submenu Menu Selections Options Descriptions Page
8.Machine Info.1.Serial No.— — You can check the serial 
number of your machine.155
2.Page Counter—Total
Fax/List
Copy
PrintYou can check the 
number of total pages the 
machine has printed 
during its life.155
3.Parts Life 1.Drum
2.Fuser
3.Laser
4.PF kit MP
5.PF kit 1
6.PF Kit 2— You can check the 
percentage of a machine 
part’s life that remains 
available.
For MFC-8380DN, 
PF Kit 2 appears only 
when the optional LT5300 
tray is installed.155
0.Initial Setup1.Receive Mode—Fax Only*
Fax/Tel
External TAD
ManualChooses the receive 
mode that best suits your 
needs.47
2.Date&Time— — Puts the date and time on 
the LCD and in headings 
of faxes you send.See 
Quick 
Setup 
Guide.
3.Station ID—Fax:
Tel:
Name:Sets your name and fax 
number to appear on each 
page you fax.
4.Tone/Pulse—Tone*
PulseChooses the dialling 
mode.
5.Dial Tone—Detection
No Detection*You can shorten the dial 
tone detect pause.127
6.Phone Line Set—Normal*
ISDN
PBXSelect  the phone line 
type.53
7.Reset 1.Network1.Reset
2.ExitRestores all network 
settings to factory default.156
2.Address & Fax1.Reset
2.ExitRestores all stored phone 
number and fax settings.156
3.All Settings1.Reset
2.ExitRestore all the machine 
settings to factory default.156
 
						

							174
Entering textD
When setting certain menu selections, such as the Station ID, you will need to type text 
characters. The dial pad keys have letters printed on them. The keys: 0, # and l do not have 
printed letters because they are used for special characters.
Press the appropriate dial pad key the number of times shown in this reference table to access 
the character you want.
For menu selections that do not allow lower case character selection, please use this reference 
table.
Inserting spaces
To enter a space in a fax number, press c once between numbers. To enter a space in a name, 
press c twice between characters.
Making corrections
If you entered a letter incorrectly and want to change it, press d to move the cursor to the incorrect 
character, and then press Clear/Back.
Repeating letters
To enter a character on the same key as the previous character, press c to move the cursor right 
before pressing the key again.
Press 
Keyone 
timetwo 
timesthree 
timesfour 
timesfive 
timessix 
timesseven 
timeseight 
timesnine 
times
1@. / 1@. / 1@
2abcABC2ab
3de f DEF3de
4gh i GH I 4gh
5jklJKL5jk
6mn oMNO6mn
7pq r sPQRS7
8tuvTUV8tu
9wxyzWXYZ9
Press Keyone timetwo timesthree timesfour timesfive times
2ABC2A
3DEF3D
4GH I 4G
5JKL5J
6MNO6M
7PQRS7
8TUV8T
9WX Y Z 9
 
						

							Menu and features
175
D
Special characters and symbols
Press l, # or 0, then press d or c to move the cursor to the symbol or character you want. 
PressOK to choose it. The symbols and characters below will appear depending on your menu 
selection.
Press lfor (space) !  # $ % &  ( ) l + , - . / m
Press #for : ; < = > ? @ [ ] ^ _  ~ ‘ | { } 
Press 0for Ä Ë Ö Ü À Ç È É 0
 
						

							176
E
GeneralE
SpecificationsE
Printer TypeLaser
Print MethodElectrophotography by semiconductor laser beam scanning
Memory Capacity64 MB
LCD (liquid crystal display)16 characters × 2 lines
Power Source220 - 240V 50/60Hz
Power ConsumptionPeak: 1080 W
Copying:
Average 570 W
1
Sleep: Average 11 W
Standby: Average 80 W
1When making a copy from one sheet
Dimensions 
WeightWith Drum/Toner Unit:  15.7 kg (MFC-8380DN)
15.5 kg (MFC-8370DN)
Noise level
Sound power
1
Operating (Copying): LwAd = 6.57 Bell (A)
(MFC-8380DN)
Lw
Ad = 6.58 Bell (A)
(MFC-8370DN)
Office equipment with Lw
Ad > 6.30 Bell (A) is not suitable for use 
in room where people do primarily intellectual work. Such 
equipment should be placed in separate rooms because of the 
noise emission.
Standby: Lw
Ad = 4.09 Bell (A)
Sound pressure
Operating (Copying): L
PAm = 56 dB (A)
Standby: L
PAm = 30 dB (A)
1Measured in accordance with ISO9296
443mm 390mm442mm
 
						

							Specifications
177
E
TemperatureOperating: 10 to 32.5°C
Storage: 5 to 35°C
HumidityOperating: 20 to 80% (without condensation)
Storage: 10 to 90% (without condensation)
ADF (automatic 
document feeder)Up to 20 pages (Staggered) [80 g/m
2]
Recommended Environment for Best Results:
Temperature: 20 to 30°C
Humidity: 50% - 70%
Paper:
Xerox Premier TCF 80 g/m
2 or Xerox 
Business 80 g/m
2
Paper Tray
250 Sheets [80 g/m2]
Paper Tray 2 (option) 
(MFC-8380DN)250 Sheets [80 g/m
2]
 
						

							178
Print mediaE
1For transparencies or labels, we recommend removing printed pages from the output paper tray immediately after they 
exit the machine to avoid the possibility of smudging.
260 to 105 g/m2 for duplex print.
Paper Input  Paper Tray
„Paper Type: Thin paper, Plain paper, Bond paper and 
Transparencies
1 or Recycled paper
„Paper Size: Letter, A4, B5 (ISO), A5, A5(Long Edge), 
B6 (ISO), A6 and Executive
„Paper Weight:
60 to 105 g/m
2
„Maximum Paper Tray 
Capacity:Up to 250 sheets of 80 g/m2 Plain paper
Multi-purpose tray (MP tray)
„Paper  Type: Thin paper, Plain paper, Thick paper, Bond 
paper, Transparencies, Recycled paper, 
Envelopes or Labels
1
„Paper Size: Width: 69.8 to 216 mm
Length:116 to 406.4 mm
„Paper Weight:
60 to 163 g/m
22
„Maximum Multi-purpose tray 
Capacity:Up to 50 sheets of 80 g/m2 Plain paper
Up to 3 envelopes
Paper Tray 2 (option) 
(MFC-8380DN)
„Paper Type: Thin paper, Plain paper, Bond paper or 
Recycled paper
„Paper Size: Letter, A4, B5(ISO), A5, B6 (ISO) and 
Executive
„Paper Weight:
60 to 105 g/m
2
„Maximum paper tray capacity:
Up to 250 sheets of 80 g/m2 Plain paper
 
						

							Specifications
179
E
Paper Output„Output Tray: Up to 150sheets (face-down print delivery 
to the output paper tray)
„Back Output Tray: One sheet (face-up print delivery to the 
back output tray)
Duplex 
Printing„Paper Size: A4
„Paper Weight:
60 to 105 g/m
2
„Manual Duplex: Yes
„Automatic Duplex: Yes