Brother Mfc 6890cdw User Manual

PhotoCapture Center®: Printing photos from a memory card or USB Flash memory drive125
12
Glass Scan Size12
To scan a Legal, Ledger, A3 or A4 size 
document, you need to change the 
Glass ScanSize setting. The default 
setting is Letter.
aPress ( Scan).
bPress  Scan to Media .
cPress dor c to display 
Glass ScanSize .
dPress Letter , Legal , Ledger , A3  or 
A4 .
Note
• You can save the setting you use most 
often by setting it as the default. (See 
Setting your changes as the new default  
on page...

Chapter 12
126
Understanding the 
Error Messages
12
Once you are familiar with the types of errors 
that can occur while you are using 
PhotoCapture Center
®, you can easily 
identify and troubleshoot any problems.
„ Hub is Unusable.
This message will appear if a Hub or USB 
Flash memory drive with a Hub has been 
put into the USB direct interface.
„ Media Error
This message will appear if you put in a 
memory card that is either bad or not 
formatted, or when there is a problem with 
the media drive....

127
13
13
Printing photos 
directly from a 
PictBridge camera
13
 
Your Brother machine supports the 
PictBridge standard, allowing you to connect 
to and print photos directly from any 
PictBridge compatible digital camera.
If your camera is using the USB Mass 
Storage standard, you can also print photos 
from a digital camera without PictBridge. 
(See  Printing photos directly from a digital 
camera (without PictBridge)  on page 129.)
PictBridge requirements13
To avoid errors, remember the following...

Chapter 13
128
„ When your camera does not have any 
menu selections, this setting is also used.
„ The names and availability of each setting 
depends on the specification of your 
camera.
Please refer to the documentation supplied 
with your camera for more detailed 
information on changing PictBridge settings.
Printing Images13
Note
Remove any memory cards or USB Flash 
memory drive from the machine before 
connecting a digital camera.
 
aMake sure that your camera is turned 
off. Connect your camera...

Printing photos from a camera129
13
Printing photos 
directly from a digital 
camera (without 
PictBridge)
13
If your camera is using the USB Mass 
Storage standard, you can connect your 
camera in storage mode. This enables you to 
print photos from your camera.
(If you would like to print photos in PictBridge 
mode, see Printing photos directly from a 
PictBridge camera  on page 127.) 
Note
The name, availability and operation differ 
among digital cameras. Please refer to the 
documentation supplied...

Chapter 13
130
Understanding the 
Error Messages
13
Once you are familiar with the types of errors 
that can occur while you are printing from a 
camera, you can easily identify and 
troubleshoot any problems. „ Out of Memory
This message will appear if you are 
working with images that are too large for 
the machines memory.
„ Unusable Device
This message will appear if you connect a 
camera that is not using the USB Mass 
Storage standard. This message will also 
appear if you connect a broken device...

Section V
SoftwareV
Software and Network features132
 

132
14
The CD-ROM includes the Software User’s 
Guide and Network User’s Guide for features 
available when connected to a computer (for 
example, printing and scanning). These guides 
have easy to use links that, when clicked, will 
take you directly to a particular section.
You can find information on these features:„ Printing
„ Scanning
„ ControlCenter3 (for Windows
®)
„ ControlCenter2 (for Macintosh
®)
„ Remote Setup
„ Faxing from your computer
„ PhotoCapture Center
® 
„ Network Printing
„ Network...

Section VI
AppendixesVI
Safety and Legal134
Troubleshooting and Routine Maintenance147
Menu and Features177
Specifications206
Glossary221
 

134
A
Choosing a locationA
Put your machine on a flat, stable surface that is free of vibration and shocks, such as a desk. Put 
the machine near a telephone wall jack and a standard AC power outlet. Choose a location where 
the temperature remains between 50°F and 95 °F (10 °C and 35 °C).
WARNING 
DO NOT put the machine near heaters, air conditioners, refrigerators, medical equipment, 
chemicals or water. 
  
DO NOT connect your machine to AC power outlets controlled by wall switches or automatic...