Brother Mfc 6890cdw User Manual

PhotoCapture Center®: Printing photos from a memory card or USB Flash memory drive115
12
Printing Photos12
Before you can print an individual image, you 
have to know the image number.
aMake sure you have put a memory card 
or USB Flash memory drive in the 
proper slot.
Press (Photo Capture). 
bPrint the Index. (See  Print Index 
(Thumbnails)  on page 114.)
cPress Index Print .
dPress Print Photos .
eEnter the image number that you want to 
print from the Index page (Thumbnails).
After you have chosen...

Chapter 12
116
Note
• You have 7 ways to add effects to your  photo.
• There are some cases when red-eye may  not be removed.
• When the face is too small in the  image.
• When the face is turning too far up,  down, left or right.
• After adding each effect, you can enlarge  the view of the image by pressing . To 
go back to the original size, press . • While the image is enlarged, you can 
move around the image with  up ( ), 
down  (), left ( ) and  right ().
•Press  Cancel to return to the list of...

PhotoCapture Center®: Printing photos from a memory card or USB Flash memory drive117
12
DPOF printing12
DPOF stands for Digital Print Order Format.
Major digital camera manufacturers (Canon 
Inc., Eastman Kodak Company, Fuji Photo 
Film Co. Ltd., Panasonic Corporation and 
Sony Corporation) created this standard to 
make it easier to print images from a digital 
camera.
If your digital camera supports DPOF 
printing, you will be able to choose on the 
digital camera display the images and 
number of...

Chapter 12
118
PhotoCapture Center® print settings12
You can change the print settings temporarily for the next printing. 
These settings are temporary, and the machine returns to its default settings 3 minutes after 
printing, unless you have set the Mode Timer to 2 minutes or less. (See  Mode Timer on page 28.)
Note
You can save the print settings you use most often by setting them as the default. (See  Setting 
your changes as the new default  on page 123.)
 
 
Menu SelectionsOptions 1Options 2Page...

PhotoCapture Center®: Printing photos from a memory card or USB Flash memory drive119
12
Print Quality12
aPress Print Setting .
bPress aor b to display 
Print Quality .
cPress Print Quality .
dPress Normal  or Photo .
eIf you do not want to change additional 
settings, press .
Press Color Start .
Paper options12
Paper Type12
aPress Print Setting .
bPress aor b to display  Paper Type .
cPress Paper Type .
dPress the paper type you are using, 
Plain Paper , Inkjet Paper , 
Brother BP71  or Other Glossy ....

Chapter 12
120
Paper and print size12
aPress  Print Setting .
bPress aor b to display  Paper Size .
cPress Paper Size .
dPress the paper size you are using, 
4x 6, 5x 7 , Letter , Ledger , A4  
or  A3 .
Do one of the following:
„ If you chose Letter or A4, go to 
step e.
„ If you chose another size of paper, 
go to step f.
ePress the Print Size.
fIf you do not want to change additional 
settings, press .
Press  Color Start .
Adjusting Brightness, 
Contrast and Color12
Brightness12
aPress Print Setting...

PhotoCapture Center®: Printing photos from a memory card or USB Flash memory drive121
12
Color Enhancement (True2Life®)12
You can turn on the color enhancement 
(True2Life
®) feature to print more vivid 
images. Printing time will be slower.
aPress  Print Setting .
bPress aor b to display  True2Life .
cPress True2Life .
dDo one of the following:
„ If you want to customize the White 
Balance, Sharpness or Color 
Density, press  On, and then go to 
step e.
„ If you do not want to customize, 
press  Off....

Chapter 12
122
Cropping12
If your photo is too long or wide to fit the 
available space on your chosen layout, part 
of the image will automatically be cropped.
The factory setting is  On. If you want to print 
the whole image, turn this setting to  Off.
If you are also using the Borderless setting, 
turn the Borderless to  Off. (See  Borderless 
printing  on page 122.)
aPress Print Setting .
bPress aor b to display  Cropping .
cPress Cropping .
dPress Off (or On).
eIf you do not want to change...

PhotoCapture Center®: Printing photos from a memory card or USB Flash memory drive123
12
Setting your changes as the 
new default12
You can save the print settings you use most 
often by setting them as the default settings. 
These settings will stay until you change 
them again.
aPress your new setting.
Repeat this step for each setting you 
want to change.
bAfter changing the last setting, press 
a
or b to choose  Set New Default .
cPress Set New Default .
dPress Yes to confirm.
ePress  Stop/Exit ....

Chapter 12
124
How to scan to a memory card 
or USB Flash memory drive12
You can scan black & white and color 
documents into a memory card or USB Flash 
memory drive. Black & white documents will 
be stored in PDF (*.PDF) or TIFF (*.TIF) file 
formats. Color documents may be stored in 
PDF (*.PDF) or JPEG (*.JPG) file formats. 
The factory setting is  Color 150 dpi and 
the default file format is PDF. File names 
default to the current date that you set using 
the control panel keys. (For details, see...