Brother Mfc 6890cdw User Manual

Section III
CopyIII
Making copies96
 

96
11
How to copy11
Entering Copy mode11
When you want to make a copy, press (Copy ) to illuminate it in blue.
 
The LCD shows:
 
1 No. of Copies
Press the number box directly and enter the 
number you want. 
Also you can enter the number of copies by 
pressing   or   on the screen (as shown 
above) or by using the dial pad.
Press  dor c to scroll through the  Copy key 
options. 
„ Quality  (See page 97.)
„ Enlarge/Reduce  (See page 98.)
„ Tray Select  (See page 102.)
„ Paper Type  (See page 101.)
„...

Making copies97
11
Making multiple copies11
You can make up to 99 copies in one print 
run.
aPress (Copy).
bLoad your document.
(See Loading documents  on page 24.)
cEnter the number of copies you want.
dPress Black Start  or Color Start .
Note
To sort the copies, press  dor c to choose 
Stack/Sort . (See Sorting copies using 
the ADF  on page 100.)
 
Stop copying11
To stop copying, press  Stop/Exit.
Copy settings11
You can change the copy settings temporarily 
for the next copy. 
These settings are...

Chapter 11
98
dPress  dor c to display  Quality.
ePress Quality .
fPress Fast, Normal  or Best .
gIf you do not want to change additional 
settings, press  Black Start or 
Color Start .
Enlarging or reducing the 
image copied11
You can choose an enlargement or reduction 
ratio. If you choose  Fit to Page, your 
machine will adjust the size automatically to 
the paper size you set.
aPress ( Copy).
bLoad your document.
cEnter the number of copies you want.
dPress  dor c to display 
Enlarge/Reduce .
ePress...

Making copies99
11
Making N in 1 copies or a 
poster (Page Layout) 11
The N in 1 copy feature can help you save 
paper by letting you copy two or four pages 
onto one printed page.
The 1 to 2 feature copies one Ledger or A3 
size page onto two Letter or A4 size pages. If 
you use this setting, use the scanner glass.
You can also produce a poster. When you 
use the poster feature your machine divides 
your document into sections, then enlarges 
the sections so you can assemble them into a 
poster. If you...

Chapter 11
100
If you are copying from the ADF, insert the 
document face up in the direction shown 
below: „ 2 in 1 (P)
 
„2 in 1 (L)
 
„4 in 1 (P)
 
„4 in 1 (L)
 
If you are copying from the scanner glass, 
place the document face down in the 
direction shown below:
„ 2 in 1 (P)
 
„2 in 1 (L)
 
„1 to 2
 
„4 in 1 (P)
 
„4 in 1 (L)
 
„Poster (2 x 2)
You can make a poster size copy of a 
photograph.
 
„Poster (3 x 3)
You can make a poster size copy of a 
photograph.
 
Sorting copies using the ADF11
You...

Making copies101
11
Adjusting Brightness and 
Contrast11
Brightness11
You can adjust the copy brightness to make 
copies darker or lighter.
aPress (
Copy).
bLoad your document.
cEnter the number of copies you want.
dPress  dor c to display  Brightness .
ePress Brightness .
fPress d to make a darker copy or press 
c  to make a lighter copy.
Press  OK.
gIf you do not want to change additional 
settings, press  Black Start or 
Color Start .
Contrast11
You can adjust the copy contrast to help an 
image look...

Chapter 11
102
dPress  dor c to display  Paper Size .
ePress Paper Size .
fPress Letter , Legal , A4 , A5 , 4x6 , 
A3  or  Ledger .
gIf you do not want to change additional 
settings, press  Black Start or 
Color Start .
Tray Select11
You can change the tray that will be used for 
next copy only. To change the default tray 
see  Tray use in Copy mode  on page 29.
aPress (Copy).
bLoad your document.
cEnter the number of copies you want.
dPress  dor c to display  Tray Select .
ePress Tray Select .
fPress...

Making copies103
11
Book Copy11
Book copy corrects dark borders and skew 
when copying from the scanner glass. Your 
machine can correct the data automatically or 
you can make specific corrections.
aPress ( Copy).
bLoad your document. 
cEnter the number of copies you want.
dPress  dor c to display  Book Copy .
ePress Book Copy .
fDo one of the following:
„ If you want to correct the data 
yourself, press  On(Preview). 
Press  Black Start  or Color Start  
and go to step g.
„ If you want the machine to...

Chapter 11
104
fDo one of the following: „ If you want to use a document as the 
watermark, press  Scan.
Place the document that you want to 
use for the watermark on the scanner 
glass and press  Black Start or 
Color Start .
The scanned data will be displayed 
on the LCD.
If you want to adjust the degree of 
Transparency for your scanned data, 
press  Transparency . 
Press  dor c to adjust the degree, 
and then press  OK.
If you do not want to adjust the 
transparency or have finished 
adjusting it,...