Brother 8460 N Manual

							Menu and Features
141
6.LAN (MFC-8870DW) (Continued)
1.Wired
(Continued)1.TCP/IP
(Continued)8.DNS Server(Primary)000.000.000.000
(Secondary)
000.000.000.000
Specifies the IP address of 
the primary or secondary 
DNS server.
See Network User’s Guide on the CD-ROM.
9.APIPA On*
OffAutomatically allocates the 
IP address from the link-
local address range.
0.IPv6On
Off*Enable or Disable the IPv6 
protocol. If you want to use 
the IPv6 protocol, visit 
http://solutions.brother.com 
fo r m ore  info rm atio n.
2.Ethernet Auto*
100B-FD
100B-HD
10B-FD
10B-HDChooses the Ethernet link 
mode.
3.Set to 
Default1.Reset1.Yes
2.NoRestore the wired network 
setting to factory default.
2.Exit
4.Wired 
EnableOn*
Off
2.WLAN 1.TCP/IP 1.BOOT Method Auto*
Static
RARP
BOOTP
DHCP
Chooses the BOOT method 
that best suits your needs.
2.IP Address[000-255].
[000-255].
[000-255].
[000-255]Enter the IP address.
3.Subnet Mask[000-255].
[000-255].
[000-255].
[000-255]Enter the Subnet mask.
4.Gateway[000-255].
[000-255].
[000-255].
[000-255]Enter the Gateway address.
5.Node NameBRN_XXXXXXEnter the Node name.
6.WINS Config Auto*
StaticChooses the WINS 
configuration mode.
Main 
MenuSubmenu Menu Selections Options Descriptions Page 
						

							142
6.LAN (MFC-8870DW) (Continued)
2.WLAN
(Continued)1.TCP/IP
(Continued)7.WINS Server(Primary)000.000.000.000
(Secondary)
000.000.000.000
Specifies the IP address of 
the primary or secondary 
WINS server.
See Network User’s Guide on the CD-ROM.
8.DNS Server(Primary)
000.000.000.000
(Secondary)
000.000.000.000
Specifies the IP address of 
the primary or secondary 
DNS server.
9.APIPA On*
OffAutomatically allocates the 
IP address from the link-local 
address range
.
0.IPv6On
Off*Enable or Disable the IPv6 
protocol. If you want to use 
the IPv6 protocol, visit 
http://solutions.brother.com 
for more information.
2.Setup WLAN 1.Setup 
WizardYou can configure your print 
server.
2.SecureEasySetupYou can configure the 
wireless network easily.
3.WLAN Status 1.StatusActive(802.11
b)
Active(802.11
g)
Disabled
Searching 
SSIDYou can see the current 
wireless network status.
2.SignalStrong
Medium
Weak
NoneYou can see the current 
wireless network signal 
strength.
3.SSIDYou can see the current 
SSID.
4.Comm.ModeAd-hoc
Infrastructure
You can see the current 
Communication Mode.
5.Security 
ModeWEP
WPA-PSK
LEAPYou can see the current 
wireless network security 
settings.
4.Set to 
Default1.Reset1.Yes
2.NoRestore the wireless 
network setting to factory 
default.
2.Exit
5.WLAN EnableOn
Off*
Enable or Disable the 
wireless LAN manually.
Main 
MenuSubmenu Menu Selections Options Descriptions Page 
						

							Menu and Features
143
6.LAN (MFC-8870DW) (Continued)
3.Setup 
IFAX1.Setup 
Internet1.Mail 
addressEnter the mail address.
See Network User’s Guide on the CD-ROM.
2.SMTP Server[000-255].
[000-255].
[000-255].
[000-255]Enter the SMTP server 
address.
3.POP3 Server[000-255].
[000-255].
[000-255].
[000-255]Enter the POP3 server 
address.
4.Mailbox 
NameEnter the mail box name.
5.Mailbox PwdEnter the password to login 
to the POP3 server.
2.Setup Mail 
RX1.Auto 
PollingOn*
OffAutomatically checks the 
POP3 server for new 
messages.
2.Poll 
Frequency10 MINSets the interval for 
checking for new messages 
on the POP3 server.
3.HeaderAll
Subject+From+
To
None*Selects the contents of the 
mail header to be printed.
4.Del Error 
MailOn*
OffDeletes error mails 
automatically.
5.NotificationOn
MDN
Off*Receives notification 
messages.
3.Setup Mail 
TX1.Sender 
SubjectDisplays the subject that is 
attached to the Internet Fax 
data.
2.Size LimitOn
Off*Limits the size of E-mail 
documents.
3.NotificationOn
Off*Sends notification 
messages.
4.Setup Relay 1.Rly 
BroadcastOn
Off*Relays a document to 
another fax machine.
2.Relay 
DomainRelayXX:Registers the Domain 
name.
3.Relay 
ReportOn
Off*Prints the Relay Broadcast 
Report.
Main 
MenuSubmenu Menu Selections Options Descriptions Page 
						

							144
6.LAN (MFC-8870DW) (Continued)
4.Scan to 
Email1.Color PDF*
JPEGChooses the file format to 
send the scanned data.
See Network User’s Guide on the CD-ROM.
2.B/W PDF*
TIFF
5.Scan to 
FTP1.Color PDF*
JPEG
2.B/W PDF*
TIFF
6.Fax to 
Server On
Off*
You can store a prefix/suffix 
address in the machine and 
can send a document from a 
fax server system.
7.Time 
ZoneUTC-XX:XXSets the time zone for your 
country.
0.Factory 
Reset1.Reset1.Yes
2.NoRestore all network settings 
to factory default.
2.Exit Main 
MenuSubmenu Menu Selections Options Descriptions Page 
						

							Menu and Features
145
Main Menu Submenu Menu Selections Options Descriptions Page
7.Machine 
Info.1.Serial No.——
Lets you check the serial 
number of your machine.128
2.Page 
Counter—Total
Copy
Print
List/Fax
Lets you check the number of 
total pages the machine has 
printed during its life.128
3.Parts Life 1.Drum
2.Fuser
3.Laser
4.PF Kit MP
5.PF Kit 1
6.PF Kit 2—
Checks the percentage of a 
machine part’s life that remains 
available. 
PF Kit 2 appears 
only when the optional CT-
5300 tray is installed.
128
0.Initial 
Setup1.Receive 
Mode—Fax Only*
Fax/Tel
External TAD
Manual
Chooses the receive mode that 
best suits your needs.39
2.Date/Time——
Puts the date and time on the 
LCD and in headings of faxes 
you send.See 
Quick 
Setup 
Guide 3.Station ID—Fax:
Tel:
Name:
Sets your name and fax 
number to appear on each 
page you fax.
4.Tone/Pulse—Tone*
PulseChooses the dialling mode.59
5.Dial Tone—Detection
No Detection*
You can shorten the dial tone 
detect pause.105
6.Phone Line 
Set—Normal*
PBX
ISDN
Select the phone line type.46 
						

							146
Entering TextD
When setting certain menu selections, such as the Station ID, you will need to type text 
characters. The number keys have letters printed on keys. The keys: 0, # and l do not have 
printed letters because they are used for special characters.
Press the appropriate number key the required number of times to access the characters below:
(For setting an e-mail address)
(For setting other menu selections)
Inserting spaces
To enter a space in a fax number, press c once between numbers. To enter a space in a name, 
press c twice between characters.
Making corrections
If you entered a letter incorrectly and want to change it, press d to move the cursor under the 
incorrect character, press Clear/Back.
Repeating letters
To enter a character on the same key as the previous character, press c to move the cursor right 
before pressing the key again.
Press 
Keyone 
timetwo 
timesthree 
timesfour 
timesfive 
timessix 
timesseven 
timeseight 
times
2abcABC2a
3de fDEF3d
4gh iGH I 4g
5jklJKL5j
6mn oMNO6m
7pq r sPQRS
8tuvTUV8t
9wxyzWXYZ
Press 
Keyone 
timetwo 
timesthree 
timesfour 
times
2ABC2
3DE F 3
4GH I 4
5JKL5
6MN O 6
7PQRS
8TUV 8
9WXYZ 
						

							Menu and Features
147
D
Special characters and symbols
Press l, # or 0, then press d or c to move the cursor under the symbol or character you want. 
Press OK to select it.
1m is not available for I-Fax settings.
Press lfor
(space) !  # $ % &  ( ) l + , - . / m 1
Press #for : ; < = > ? @ [ ] ^ _
Press 0for Ä Ë Ö Ü À Ç È É 0 
						

							148
E
General
Specifications
Memory Capacity32 MB 
ADF (automatic document 
feeder)Up to 50 pages (Staggered)
Recommended Environment:
Temperature: 20 to 30°C (68°F to 86°F)
Humidity: 50% - 70%
Paper: Xerox Premier 80 g/m
2 or 
Xerox Business 80 g/m
2
Paper Tray
250 Sheets [80 g/m2 (20 lb)]
Printer TypeLaser
Print MethodElectrophotography by semiconductor laser beam scanning
LCD (liquid crystal display)22 characters × 5 lines 
Power Source220 - 240V 50/60Hz
Power ConsumptionCopying: Average 660 W
Sleep: Average 17 W
Standby: Average 85 W
Dimensions
 
WeightWithout Drum/Toner Unit: 
(MFC-8460N) 16.5 kg (36.4 lb)
(MFC-8860DN and MFC-8870DW) 16.7 kg (36.9 lb)
Noise levelSound power
Operating (Copying):  LWAd = 7.0 Bell
Standby:  LWAd = 4.6 Bell
Sound pressure
Operating (Copying):  LpAm = 55 dBA
Standby:  LpAm = 30 dBA
TemperatureOperating: 10 to 32.5°C (50°F to 90.5°F)
Storage: 0 to 40°C (32°F to 104°F)
HumidityOperating: 20 to 80% (without condensation)
Storage: 10 to 90% (without condensation)
531 mm
(20.9 in.)450 mm
(17.7 in.)
475 mm
(18.7 in.) 
						

							Specifications
149
Print media
Paper Input  Paper Tray
„Paper type:
Plain paper, Bond Paper, Recycled paper or Transparencies
„Paper size:
A4, Letter, Executive, A5, A6, B5 and B6
„Paper Weight:
60 to 105 g/m
2 (16 to 28 lb)
„Maximum paper tray capacity: Up to 250 sheets of 80 g/m
2 
(20 lb) plain paper or up to 10 transparencies
Multi-purpose tray (MP tray)
„Paper type:
Plain paper, Recycled paper, Transparencies, Envelopes, 
Bond paper or Labels
„Paper size:
Width: 69.9 to 215.9 mm (2.75 to 8.5 in.)
Length:116 to 406.4 mm (4.57 to 16 in.)
„Paper Weight:
60 to 161 g/m
2 (16 to 43 lb)
„Maximum paper tray capacity: Up to 50 sheets of 80 g/m
2 
(20 lb) plain paper 
Paper OutputUp to 150 sheets (Face down print delivery to the output paper 
tray) 
						

							150
Fax
1‘Pages’ refers to the ‘Brother Standard Chart No. 1’ (a typical business letter, Standard resolution, JBIG code). 
Specifications and printed materials are subject to change without prior notice.
2‘Pages’ refers to the ‘ITU-T Test Chart #1’ (a typical business letter, Standard resolution, JBIG code). Specifications 
and printed materials are subject to change without prior notice.
CompatibilityITU-T Group 3
Duplex Fax (Receive)Yes (MFC-8860DN and MFC-8870DW only)
Coding SystemMH/MR/MMR/JBIG
Modem SpeedAutomatic Fallback: 33600 bps
Single-Sided Document 
SizeADF Width: 148.0 to 215.9 mm (5.8 to 8.5 in.)
ADF Height: 148.0 to 355.6 mm (5.8 to 14 in.)
Scanner Glass Width: Max. 215.9 mm (8.5 in.)
Scanner Glass Height: Max. 355.6 mm (14in.)
2-Sided Document Size 
(MFC-8860DN and 
MFC-8870DW only) ADF Width: 148.0 to 215.9 mm (5.8 to 8.5 in.) 
ADF Height: 148.0 to 297.0 mm (5.8 to 11.7 in.)
Scanning WidthMax. 208 mm (8.2 in.)
Printing WidthMax. 208 mm (8.2 in.)
Greyscale256 levels
Polling Types Standard, Secure, Timer, Sequential
Contrast ControlAutomatic/Light/Dark (manual setting)
Resolution„Horizontal
203 dot/inch (8 dot/mm)
„Vertical
Standard: 3.85 line/mm (98 line/in.)
Fine: 7.7 line/mm (196 line/in.)
Photo: 7.7 line/mm (196 line/in.)
Superfine: 15.4 line/mm (392 line/in.)
One-Touch Dial40 (20 × 2)
Speed-Dial300 stations 
Broadcasting390 stations
Automatic Redial3 times at 5 minute intervals
Auto Answer0, 1, 2, 3, 4, 5, 6, 7 or 8 rings (for UK)
Communication SourcePublic switched telephone network.
Memory Transmission
Up to 600
 1 /500 2 pages 
Out of Paper Reception
Up to 600
 1 /500 2 pages