Barco Hdx Series Installation Manual

							E. Stacking HDX projectors
5. If necessary, adjust the skew of the stacked projector with respect to the reference projector by turning the Hand screw in or out.
The hand screw is located at smallest side of the carrying handle (front or back). Adjust until the outline of the hatch pattern is
most symmetric with the reference hatch pattern.
Skew
Image E-8
Stacked projectors, skew
6. Shift the hatch pattern horizontally and vertically untilthe outline of the hatch pattern is most symmetrically placed with respect
to the reference hatch pattern.
Note:Note that the “Shift” function is motorized, which means that you have to access the projector software, via the local
keypad or remote control unit, to operate the “Shift” function.
Shift
Image E-9
Stacked projectors, shift
7. Zoom the hatch pattern in or out until the outline of the hatch pattern matches exactly the outline of the reference hatch pattern.
Note:Note that the “Zoom” function is motorized, which means that you have to access the projector software, via the local
keypad or remote control unit, to operate the “Zoom” function.
Zoom
Image E-10
Stacked projector, zoom
8. If necessary, repeat from step 2 until the hatch pattern of the stacked projector is perfectly aligned with the hatch pattern of the
reference projector.
In case of a triple stacked table mount projector configuration adjust and alignfirst the bottommost projector
(reference), than the projector in the middle andfinally the uppermost projector.
R5905032 HDX SERIES 23/11/2011347 
						

							E. Stacking HDX projectors
348R5905032 HDX SERIES 23/11/2011 
						

							F. Environmental information
F. ENVIRONMENTAL INFORMATION
R5905032 HDX SERIES 23/11/2011349 
						

							F. Environmental information
350R5905032 HDX SERIES 23/11/2011 
						

							F. Environmental information
F.1 Disposal information
Disposal Information
Waste Electrical and Electronic Equipment
This symbol on the product indicates that, under the European Directive 2002/96/EC governing waste from electrical and
electronic equipment, this product must not be disposed of withother municipal waste. Please dispose of your waste equipment by
handing it over to a designated collection point for the recycling ofwaste electrical and electronic equipment. To prevent possible
harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste
and recycle them responsibly to promote the sustainable reuse of material resources.
For more information about recycling of this product, please contact your local city office or your municipal waste disposal service.
For details, please visit the Barco website at:h
ttp://www.barco.com/en/AboutBarco/weee
Disposal of batteries in the product
This product contains batteries covered by the Directive 2006/66/EC which must be collected and disposed of separately
from municipal waste.
If the battery contains more than the specified values of lead (Pb), mercury (Hg) or cadmium (Cd), these chemical symbols will
appear below the crossed-out wheeled bin symbol.
By participating in separate collection of batteries, you will help to ensure proper disposal and to prevent potential negative effects
on the environment and human health.
R5905032 HDX SERIES 23/11/2011
351 
						

							F. Environmental information
F.2 Rohs compliance
Turkey RoHS compliance
Türkiye Cumhuriyeti: EEE Yönetmeliğine Uygundur.
[Republic of Turkey: In conformity with the EEE Regulation]
中国大陆RoHS (Information for China ROHS compliance)
根据中国大陆《电子信息产品污染控制管理办法》(也称为中国大陆RoHS)，以下部份列出了本产品中可能包含的有毒有害物质或
元素的名称 和含量。
10
Table of toxic and hazardous substances/elements and theircontent, as required by China’s management methods for controlling
pollution by electronic information products
零件项目(名称)
Component name有毒有害物质或元素
Hazardous substances and elements
铅
Pb汞
Hg镉
Cd六价铬
Cr6+多溴联苯
PBB多溴二苯醚
PBDE
印制电路配件
Printed Circuit Assembliesoo o o oo
插入式插件
Plug assemblyoo o o oo
外接电(线)缆
External Cablesoo o o oo
內部线路
Internal wiringoo o o oo
散热片(器)
Heatsinksoo o o oo
光学镜头
Optical lensesx
ooo oo
底架
Chassisoo o o oo
外壳
Enclosureoo o o oo
螺帽,螺钉(栓),螺旋(钉),垫圈,紧固件
Nuts, bolts, screws, washers, Fastenersoo o o oo
电源供应器
Power Supply Unitoo o o oo
风扇
Fanoo o o oo
键盘
Keyboardoo o o oo
352R5905032 HDX SERIES 23/11/2011 
						

							F. Environmental information
零件项目(名称)
Component name有毒有害物质或元素
Hazardous substances and elements
铅
Pb汞
Hg镉
Cd六价铬
Cr6+多溴联苯
PBB多溴二苯醚
PBDE
显示(器)
Displayoo o o oo
正面(前)面板
Front paneloo o o oo
金属制品[制造]
Metalworkoo o o oo
塑胶制品[制造]
Plastic workoo o o oo
电池(组)
Batteriesoo o o oo
文件说明书
Paper Manualsoo o o oo
光盘说明书
CD Manualoo o o oo
装置配件
Installation kitoo o o oo
O:表示该有毒有害物质在该部件所有均质材料中的含量均在SJ/T 11363-2006标准规定的限量要求以下.
O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the
limit requirement in SJ/T11363-2006.
X:表示该有毒有害物质至少在该部件的某一均质材料中的含量超出SJ/T 11363-2006标准规定的限量要求.
X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is
above the limit requirement in SJ/T11363-2006
R5905032 HDX SERIES 23/11/2011353 
						

							F. Environmental information
354R5905032 HDX SERIES 23/11/2011 
						

							Index
INDEX
Numerics/Symbols
5cableconfiguration 103
5-cable input 55
Connectivity 55
A
Address 73
Program 73
RCU 73
Adjustment 79, 81–82, 89
How to 89
Quick set up 79, 81–82
Lens functions 81
Lens key 79
PIP 82
Adjustment mode 85–88, 90–93
About 86
Help information 93
Local keypad 87
Menu memory 90
RCU 87
Shortcut keys 91
Start up 85, 88
Test patterns 92
Airflow 21
Air inlets 21
Air outlets 21
Alignment 45, 52, 191–202, 204, 206, 208–210, 212–215,
217–223, 226
Blanking 210
Ceiling mounted projector 52
Color space 215
Contrast enhancement 212
Gamma 213
Intensity 212
Internal patterns 214
Lens adjustment 194–198
Calibrate 198
Home lens at startup 197
Mid position 196
Zoom - focus 194–195
Orientation 193
Overview 192
Scenergix 217, 220–223, 226
Activation 220
Adjustment lines 222
Black level 226
Blending area 223
Overlap area 223
Pattern 221
White level adjustment 223
ScenergiX 218–219
Introduction 218
Preparations 219
Table mounted projector 45
Warping 199–202, 204, 206, 208–209
About 200
Barrel correction 206
Corners 208
File service 209
Horizontal keystone 204
Pin cushion correction 206
Rotation 202
Status 201
Vertical keystone 204
Aspect ratio 133
Auto dimming 113, 181–183, 303
No signal 113
Over-temperature 303
When no signal 182
When on pause 181When over-temperature 183
B
Bar scale 271
Position 271
Bar scale position 271
Barrel distortion 206
Baud rate 236
Blanking adjustment 210
Bottom carry handler 46
Brightness adjustment 120
C
Carry handler 46, 48
Bottom 46
To p 4 8
cleaning 306
lens 306
Cleaning 307
Exterior 307
CLO mode 184
CLO targets 186
Color space 215
Color temperature 124, 126–127
Custom values 126
Fixed values 124, 127
Common projector address 234
Communication 53–54, 57–59
DMX 57
Ethernet 59
Introduction 54
RS232 58
RS422 58
Status lights 59
USB port 59
Communication connections 57
Configurations 17
Front projection 17
Rear projection 17
Connection 44
Power cable 44
Power net 44
Connections 57, 60
Communication 57
Utility-Accessory Outlet 60
Contrast adjustment 119
Contrast enhancement 212
Convergence 294
Cooling liquid circuit warning 8
Cooling requirements 12
Copy customfile 147
Corner correction 208
D
Date 304
Set up 304
Delete all customfile 144
Delete customfile 143
Diagnosis 279–280, 282, 284, 286–287, 289
Board Id 286
Logging 284
Measurements 282
Fan speeds 282
Temperatures 282
Voltages 282
Notification 287
Tilt sensor 289
Versions 280
Dimensions 323–324
R5905032 HDX SERIES 23/11/2011
355 
						

							Index
Projector 324
DMX 259–264, 266
Art-Net 263
DMX address 260
DMX universe 261–262
Front XLR output voltage 264
Monitor 266
DMX chart 337–340
Basic 338
Extended 340
Full 339
DMX input 57
DMX interface 57
DMX out 57
Download plug-in 22
Download Projector Toolset 22
Dustfilter 321
Clean 321
Remove 321
Dustfilter, high density 320
Replace 320
DVI configuration 100
DVI input 55
E
Environment conditions 12
Environmental information 349, 351–352
Disposal information 351
Rohs compliance 352
Ethernet 59
Ethernet connection 238, 240–241, 243, 245, 247, 249, 251–252,
254, 256
Default gateway, wired connection 245
Default gateway, wireless network 256
DHCP, wired connection 240
DHCP, Wireless connection 251
IP address, wired connection 241
IP address, wireless network 252
Subnet mask, wired connection 243
Subnet mask, wireless network 254
Wireless access points 249
Wireless network activation 247
Wireless setup 249
Exterior 307
Cleaning 307
F
Factory defaults 296
File loadfilter 142
File services 169–175
Layout 169–175
Delete 172, 174
Delete all 173
Loadfile 170
Rename 171
Zoom-Focus-Shift 175
Flight case 16
Front cover 314, 316
Mount 316
Removal 314
Front projection 17
Fuses 44
G
Gamma adjustment 213
General 11, 22
Download plug-in 22
Download Projector Toolset 22
General considerations 6
Getting started 61, 63, 72, 75
Projector address 72
Source selection 75Terminology overview 63
Getting Started 62
RCU & local keypad 62
H
Hang up 49
Projector 49
HDSDI input 55
Help information 93
Adjustment mode 93
Horizontal 206
Barrel 206
Pin cushion 206
Horizontal keystone 204
Horizontal tilt range 20
How to use 71
RCU 71
Remote control 71
I
Image 115, 133, 135–137, 139–145, 147, 149–151
Aspect ratio 133
File services 139
Image services 140–145, 147, 149–150
Copy 147
Delete allfile 144
Delete customfile 143
File loadfilter 142
File manipulations 140
Files 140
Manual loadfile 141
Option auto picture alignment 150
Option loadfile 149
Rename 145
Save custom settings 151
Source timings 136–137
Advanced timings 137
Clamp delay 137
Clamp width 137
Timings 135–137
Advanced timings 137
Clamp delay 137
Clamp width 137
Imagefile service options 149–150
Auto picture alignment 150
Loadfile 149
Imagefiles 139
Image menu 116–122, 124, 126–127, 130
Image settings 118–122, 124, 126–127, 130
Brightness 120
Color temperature (custom) 126
Color temperature (fixed) 124, 127
Contrast 119
Input balance, adjust 130
Phase 122
Saturation 121
Overview 116–117
Image orientation 193
Image services 140–145, 147, 149–150
Copyfile 147
Delete allfile 144
Delete customfile 143
File loadfilter 142
File manipulations 140
Files 140
Manual loadfile 141
Option auto picture alignment 150
Option loadfile 149
Rename 145
Initial inspection 15
Box content 15
Input 53–55, 310
Insertion 310
356
R5905032 HDX SERIES 23/11/2011