Barco Hdx Series Installation Manual

							12. Alignment
Image 12-41
Pin/Barrel adjustment
6. Use the▲or▼key to selectPinc./Barrel Hor.orPinc/Barrel Vert..
Use the◄or►key to adjust the value of the selected Pin/barrel or enter the value with the numeric keys.
Note:PressENTERto open the bar scale adjustment and use the▲or▼key or use the◄or►key to adjust the horizontal
or vertical Pin/barrel correction.
R5905032 HDX SERIES 23/11/2011
207 
						

							12. Alignment
12.8.6 4 corners adjustment
What can be done ?
Each corner can be adjusted separately in the X and Y direction.
How to adjust
1. PressMenuto activate the menus and selectAlignment→Warping.
Image 12-42
Main menu, alignment
Image 12-43
Alignment, warping
2. PressENTERto open theWarpingmenu.
3. Use the▲or▼key to select4 Corners.
Image 12-44
Warping, 4 corners
4. Use the►key to open the 4 corners adjustment menu.
Image 12-45
4 corner, warping menu
5. Use the▲or▼key to select the desired corner and direction.
Use the◄or►key to adjust the value or enter the value with the numeric keys.
Note:PressENTERto open the bar scale adjustment and use the▲or▼key or use the◄or►key to adjust the X or Y
direction of a corner adjustment.
208
R5905032 HDX SERIES 23/11/2011 
						

							12. Alignment
12.8.7 Warpfile service
Before warpfiles can be used, thesefiles must be downloaded on the projector via Projector Toolset equipped
with a HDX plug in.
How to start up
1. PressMenuto activate the menus and selectAlignment→Warping→Warp File Service.
Image 12-46
Main menu, alignment
Image 12-47
Alignment, warping
Image 12-48
Warpfile service
2. PressENTERto activate.
A list with possible warpfiles is displayed.
Image 12-49
List of warpfiles
3. Use the▲or▼key to select the desired warpfile and pressENTERto load thisfile.
R5905032 HDX SERIES 23/11/2011
209 
						

							12. Alignment
12.9 Blanking adjustment
What can be done ?
Blanking adjustments affect only the edges of the projected image and are used to frame the projected image on to the screen and
to hide or black out unwanted information (or noise). A ’0’ on the bar scale indicates no blanking.
Which blanking adjustments are available ?
• top blanking
• bottom blanking
•leftblanking
• right blanking
Image 12-50
Blanking
A Top blanking
B Bottom blanking
C Left blanking
D Right blanking
The reset function brings all blanking settings back to zero.
How to adjust
1. PressMenuto activate the menus and selectAlignment→Blanking.
Image 12-51
Main menu, alignment
Image 12-52
Alignment, blanking
2. PressENTERto select.
210
R5905032 HDX SERIES 23/11/2011 
						

							12. Alignment
The blanking adjustment menu opens.
Image 12-53
Blanking adjustment
3. Use the▲or▼key to select the desired blanking adjustment and adjust with the◄or►key.
SelectResetto reset all blanking adjustments.
R5905032 HDX SERIES 23/11/2011211 
						

							12. Alignment
12.10 Contrast-Intensity
Purpose
Contrast : change the contrast of the complete output signal (main and PiP window together) of the projected image.
Intensity : change the brightness of the complete output signal (main and PiP window together) of the projected image.
How to set up
1. PressMenuto activate the menus and selectAlignment→Contrast/Intensity.
Image 12-54
Main menu, alignment
Image 12-55
Alignment, contrast/intensity
2. PressENTERto select.
Image 12-56
Contrast enhancement
3. Use the▲or▼key to selectContrast Enhancement.
Use the◄or►key to change the contrast enhancement until the desired value is reached (adjustable between 0 and 5)
4. Use the▲or▼key to selectIntensity.
Use the◄or►key to change the intensity until the desired value is reached (adjustable between 0 and 255)
Image 12-57
Intensity
212R5905032 HDX SERIES 23/11/2011 
						

							12. Alignment
12.11 Gamma
About Gamma
Gamma is an image quality enhancement function that offers a richer image by brightening the already darker portions of the image
without altering the brightness of the brighter portions (contrast feeling enhanced).
How to adjust
1. PressMenuto activate the menus and selectAlignment→Gamma.
Image 12-58
Main menu, alignment
Image 12-59
Alignment, gamma
2. Use the◄or►key to change the gamma value between 1.0 and 3.1 .
R5905032 HDX SERIES 23/11/2011
213 
						

							12. Alignment
12.12 Internal patterns
What can be done with these patterns?
The projector is equipped with different internal patterns which can be used for measurement and alignment purposes.
How to select a pattern
1. PressMenuto activate the menus and selectAlignment→Internal Patterns.
Image 12-60
Main menu, alignment
Image 12-61
Alignment, internal patterns
2. PressENTERto select the pattern list.
Image 12-62
OSD test patterns
3. Use the▲or▼key to select a pattern and pressENTERto display that pattern.
The following patterns are available:
- Checker board
-ColorBars
- Convergence
- Convergence_2
- Ansi Lumen
-Focuswhite
- Focus black
- Focus green
- Full Screen Black
- Full Screen White
-CrossHatch
- Outline
- Scenergix
214
R5905032 HDX SERIES 23/11/2011 
						

							12. Alignment
12.13 Color space
Color space
A color space or color standard is a mathematical representation for a color. For example the RGB color space is
based on a Cartesian coordinate system.
What can be adjusted ?
The color space (gamut), the collection of colors which can be reproduced by the projector, can be adjusted to4 predefined stored
values (one projector specific, 2 international standards and one custom preset). A temporary custom adjustment is possible. The
maximum color space which can be displayed is the projector color space. This color space is measured at the factory and stored
inside the projector.
How to select a color standard
1. PressMenuto activate the menus and selectAlignment→Color Space.
Image 12-63
Main menu, alignment
Image 12-64
Alignment, color space
Image 12-65
Color space
2. SelectStatusand pressENTERto toggle between[On]or[Off].
[On] : projector will use the selected color space.
[Off] : projector will always use theProjectorcolor space.
3. When [On] is selected, depending on he color temperature setting a color space request window opens. The color temperature
setting must be set to Projector White.
ClickYesto continue.
Image 12-66
R5905032 HDX SERIES 23/11/2011215 
						

							12. Alignment
4. When[On]is selected and the color temperature is correct, use the▲or▼key to select the desired color space and press
ENTERto select.
Projector Maximum color space
EBU
European Broadcasting Union. This organization defines a European standard.
SMPTEAmerican standard.
Custom The user can define the x and y coordinates for red, green and blue which forms the corners of the color space.
By changing the coordinates, the color reproduction can be changed.
Edit color targets
Color targets will be used when Custom is selected.
1. SelectEdit Color Targetsand pressENTER.
Image 12-67
Custom, color targets
Image 12-68
Color targets
2. Use the▲or▼key to select a color coordinate.
Use the◄or►key to change the value of the selected coordinate.
Adjust all other coordinates in the same way.
SelectResetto return to previous saved values.
216R5905032 HDX SERIES 23/11/2011